How do I identify my Moen valve?
Look closely at the handle buttons that were attached to the shower valve. Typically, “Moen” will be written in the middle of the “Hot” and “Cold” buttons. If you do not see this, the handle buttons have been replaced, or the “Hot/Cold” button is a lever (wall escutcheon).
What type of Moen valve do I have?
If not the series number can be usually be found on the underside of the faucet or on the decorative escutcheon ring that goes around it. The second way to identify your Moen valve cartridge is to remove the old one. You will do this by first shutting off the hot and cold water feed to your shower.
Does Moen still make Moentrol?
Moen will continue to make Moentrol-compatible trim selectively from the following collections: Align (Moentrol valve only, valve with transfer, transfer only) Kingsley (Moentrol valve only, valve with transfer, transfer only)
How do I know which Moen shower faucet I have?
Exact model numbers can be found on your box or on your instruction sheet. If unavailable, you may find the general family series number on the back of the spout (non pullout).
How do I identify my Moen cartridge?
Quote from the video:
Quote from Youtube video: Simply by going to your faucet years ago go into your faucet. And pull them pulling. On your cartridge if the handle pulls out it's a 12 25 cartridge.
How do I identify my faucet cartridge?
Easiest of all is when it says the brand name right on the faucet face. But you should also look at the bottom of the faucet, on the handles or on the round plate behind the handles. If you find a brand name, go to the manufacturer’s website and call the contact number for assistance.
What is the difference between Moen Posi Temp and Moentrol?
The PosiTemp doesn’t have Temperature Memory. The handle goes from one side to the other always going from cold to hot from the off position. The Moentrol Valve has volume control which controls the water flow rate so you get the amount of water you want at the temperature you desire.
How do I know if I have a single handle shower valve?
Assess the faucet and determine how many handles it has. If it has two handles, it is a double-handle faucet, which means that the hot and cold water pipes each connect to separate handles. If it has one handle, it is a single-handle faucet. If the faucet has three handles, it is a rare three-handle model.
Are all Moen Posi Temp valves the same?
For many years Moen tub/shower valves have been manufactured using one of three valves. These valves are Standard, Posi-Temp and Moentrol. Although the look is similar, the trim is not necessarily interchangeable.
How do I identify a Grohe shower valve?
If you still cannot locate the model, check the bottom of the faucet beneath your sink — this part is a called a stem. You may see the words “Grohe” or the full manufacturer name of “Friedrich Grohe” engraved somewhere on that part of the faucet. You should also see a model number.
How do I identify my faucet manufacturer?
The most obvious and quickest solution is to look for a logo — the manufacturer’s symbol — that identifies its faucets. Each manufacturer has a distinctive logo that sometimes appears on the escutcheon — the plate beneath the faucet — the body of the faucet, the spout itself or somewhere on the handle.
How do I know what type of shower valve I have?
Count the Number of Shower Faucet Handles
Often, the type of shower faucet and handle(s) will indicate what kind of shower valve is behind it. Zero handles may imply a shower panel faucet with buttons to control water flow and temperature.
Are all shower valves universal?
Shower valves are not universal and you cannot mix manufacturers when it comes to trim and rough-in valves. Besides that, one manufacturer will have different valve sizes and types which may also not be universal and interchangeable with each other. Luckily, shower sets are always sold as a complete set.
What are the different types of shower valves?
In a nutshell, there are three different types of shower valves on the market: pressure balancing shower valve, thermostatic shower valve and diverter shower valve.
Are shower valve cartridges universal?
Cartridges aren’t interchangeable among different faucets, so if you decide you need a replacement, you need to know its part number so you can order it from your plumbing supplier or online. That number is usually available on the manufacturer’s website in the online version of the owner’s manual for your faucet.
Can I replace my shower faucet with any brand?
MongoCT. Showerhead threading is pretty much universal, you can swap one for most any other. Shower valve trim kits are the exact opposite…you may have luck by staying within a certain manufacturer, but for the most part trying to swap a trim kit onto an existing valve may or may not work.
How do I find my shower valve manufacturer?
The quickest solution of How to Identify the Shower Valve Manufacturer is to look for the manufacturer’s logo or name. A brand name or model can be found practically anywhere, so cleaning faucet handles, escutcheon, spout, decorative rings, etc., is helpful.
How can I tell what brand my bathroom faucet is?
Quote from the video:
Quote from Youtube video: Okay so the easiest way to figure out what brand of faucet you have is to look on the outside to see if you can find the logo or the name brand of the manufacturer. Sometimes this can be covered up by
What does a shower valve look like?
Quote from the video:
Quote from Youtube video: The valve is the most important piece of your shower. You never see hidden behind the trim inside the wall our brass components that direct hot and cold water where to go.
