What are the pipes in my basement?

Foundation drains are pipes that are installed under your foundation or basement floor to collect water and move it off-site to prevent your basement from filling with water.

Can you cover pipes in basement?





If you have several pipes together in one or more locations, you may be able to hide them with a box. If you are handy with a hammer and saw, frame a box around your pipes and then wrap it with paneling or drywall. Finish and trim as needed and stand back to admire your work.

How do you rough in a drain pipe?

Quote from the video:
Quote from Youtube video: And I'm just going to make sure on the other side that it's exactly where I want it otherwise we'll make some modifications.

How do you rough in a basement?

Quote from the video:
Quote from Youtube video: So we're just going to go over here I'll explain to you how we're laying out the drain lines. And the vent lines because the stuff has to be vented.

How do you trace plumbing lines?

Some of the steps include: Purchase or recent a pipe locator from a local store and set the transmitter and locator wand to identical frequencies. Feed the detector line about 15 feet into a sewer cleanout or drain. Try to avoid using a toilet since the device tends to work poorly if it is submerged.

Where does the drain in the basement floor go?





Your basement floor drain is located at the lowest point of your basement, and its job is to direct any water safely away from the house and to the sewer system or municipal storm drain system. This keeps your basement floor dry and prevents flooding, which may damage personal belongings.

What are the pipes in my unfinished basement?

The small one in the top left coming out of the floor is likely for a shower or tub. The larger diameter pipe coming out of the floor is almost certainly for a toilet. The smaller pipe to the right of the toilet that continues up is for the lavatory (i.e. sink).

How do you cover an unsightly pipe?

Wrapping your pipes in decorative coverings is a great option for those with small sections to disguise. You can purchase plastic or wooden pipe coverings at most hardware stores to match your decor. Simply spray some adhesive spray over the pipe and wrap your covering around it.

How do you hide low pipes in a basement?

How to Conceal Low Pipes in a Basement

  1. Paint to Match Ceiling. If you are looking for an easy, budget-friendly way to hide low pipes in your basement, paint is your best option. …
  2. Fabric Water Pipe Cover. …
  3. Faux Wood Beams. …
  4. Install a Suspended Ceiling.



How do you move rough-in plumbing in a basement?

Quote from the video:
Quote from Youtube video: So I've kind of made an outline around that that you shape you take line that I did I just what you do is just set up run the jackhammer around the outside then you can start breaking up the concrete.

What are plumbing rough ins?

“Rough-Ins”



The “rough-in” is when mechanical, electrical, and plumbing lines are laid out in the home. Final connections are not made until later in the project. In order to begin the rough-in process, the basic framework of the home must be completed.

How do you install a toilet in a basement with a rough-in pipe?



Quote from the video:
Quote from Youtube video: And just clean the inside of the pipe up make sure this size clean on the flange. And fit it in it'll sit flush with the floor when it's pushed down finally but it's pretty tight.

How do I find the water pipes to my property?

To find your water meter, check the sidewalk or parking strip outside your home for a square metal cover set into the ground. If you lift up the cover, you should be able to see the water meter inside. If you can’t locate your water meter, contact your local water supply company.

Can a stud finder find water pipes?

Yes, stud finders are designed to find any obstruction in the wall including the water pipes. You can rely on a new model of a stud finder to help you detect water pipes for use around the house.

How do you find water pipes in concrete walls?

How to Locate Water Pipes in Brick or Concrete Walls

  1. Use an electronic stud finder with deep scan and metal detection.
  2. Use a wall scanner with a “concrete” or “masonry” setting to scan your wall for pipes.
  3. Try a metal detector for locating metal pipes.
  4. Check your crawlspace or basement to see where pipes lead.

How do I find plumbing pipes under concrete?



Quote from the video:
Quote from Youtube video: So what it is is it puts a signal into the line or conduit you're trying to locate and then with this wand you're able to go along and detect it under the slab or underground.

Can a metal detector find water pipes?

As a property owner there will be times when, for a variety of reasons, you will need to locate underground metal objects. For example, using a pipe locator metal detector you can easily pinpoint leaking underground pipes quickly.

How do you trace water pipes in the wall?

The best methods for finding plastic pipes in your wall are:

  1. Use a wall scanner.
  2. Use a stud finder to detect pipes while water is running through them.
  3. Use a borescope camera that links with your smartphone.
  4. Run water and use a stethoscope to locate pipes by sound.