Almost all old floors can be salvaged and refinished by skilled contractors. Termite-damaged planks, insect-infested boards or delaminated strips can be replaced if there aren’t too many. Squeaky floors can be tightened and quieted, at least temporarily, with nails or dry lubricant. Holes can be plugged.
How do I bring my old hardwood floors back to life?
How to Revitalize Floors
- First, give your floor a good cleaning. …
- Next, apply the revitalizer according to the package instructions. …
- Use your mop to spread the revitalizer on the floor. …
- Once the revitalizer is spread evenly, let it dry fully before you move furniture back in place or allow foot traffic on the floors.
How do you repair damaged hardwood floors?
For deep gouges or dents, you can use a wood floor filler and wood stain to repair the damaged area. Before applying the filler, tape off the damaged area so you don’t accidentally apply filler where it doesn’t belong. Mix equal parts of the epoxy-based filler and apply to the gouge with a putty knife. Allow to dry.
Can you remove and reinstall hardwood flooring?
So is it possible to pull up hardwood floors and reinstall them? Yes, this is definitely possible. Since they are environment-friendly and extremely durable, hardwood floors are often reused when remodeling or building a home. They also offer better aesthetics and lower costs than buying new materials.
How do you tell if your hardwood floors can be refinished?
Water Test. Pour a spoonful of water onto the floor. If it forms droplets that stay on the surface of the wood, the floor finish is still good. If the water is slowly absorbed into the wood, the finish is worn and needs to be restored.
How do you revive hardwood floors without refinishing them?
Just squirt Reviver on the floor in an “S” pattern and spread a thin, even coat using a damp painter’s pad or a synthetic applicator attached to a long handle. Work in small sections, moving in the direction of the floorboards using a back-and-forth motion, until the entire floor is coated. Even the cleanup is easy.
How do you restore dull hardwood floors?
Sweep or vacuum, then mop with a commercial wood floor cleaner or solution of a quarter-cup of dish soap and a gallon of warm water to lift any lingering grime. Give the floors a final pass with a clean, water-dampened mop to remove any cleaner residue. Dry completely with a soft, clean towel.
Can I stay in my house while floors are refinished?
Strong Scents
The strong scent of polyurethane and stain lingers in the atmosphere for very long and can kick-start a migraine any time or all the time. Even if it’s not causing migraines, it’s still uncomfortable to live in a house where the floor is being refinished and there are strong odors in the air.
Is it cheaper to refinish or replace hardwood floors?
Refinishing hardwood floors is more cost-effective than replacing them. On average, it costs about $2,000 to $7,000 to replace hardwood flooring (two to three times more than to refinish).
What is the best time of year to refinish hardwood floors?
If I had to pick an ideal time, I would say spring or fall when the indoor temperature is most consistent with outdoor temperature and it’s often easy to open the windows (after the work is complete) to help air out the smell faster. But, really, sanding and refinishing hardwood can take place any time of year.
How many times can you sand and refinish hardwood floors?
Hardwood flooring can be re-sanded up to 10 times, depending on how bad the floor is and how skilled the person doing the sanding is. It costs about $2.50 per square foot to refinish a floor, plus $50 an hour for patching and thresholds.
How long do hardwood floors last?
On average, a hardwood flooring finish lasts approximately ten years. But with proper care and maintenance, it can last much longer.
Should you refinish hardwood floors yourself?
If you only have some minor scratches and dings or a dull finish, you might be able to simply buff and add a new coat of varnish. But, even if your floors need a complete makeover, refinishing hardwood is a very manageable and rewarding do-it-yourself job that can save a lot of money.
Should I sand my own hardwood floors?
Sanding wood floors is a time consuming but relatively easy procedure. Sanding wood floors & refinishing yourself will definitely save money, and even an inexperienced homeowner can likely do a better job than the lowest bidding handyperson who quotes on it.
Can I change the color of my hardwood floors?
When you refinish your floors, you can change the color of your flooring. Most hardwood floors can be made darker, lighter, redder, or anywhere in between. If your flooring is solid hardwood, it can be sanded and refinished in a different stain for a different appearance.
What is the cheapest way to refinish hardwood floors?
Applying a revitalizer gloss is the simplest and cheapest way to refinish hardwood floors. This approach works best on floors that only have surface-level scratches and other minor wear and tear issues. You can get the job done without the need for equipment rentals or hard-to-find materials.
Can wood floors be refinished without sanding?
The best way to refinish wood floors without sanding is to use a technique called screen and recoat. This involves scuffing up the finish with a floor buffer and applying a refresher coat of finish.
Can hardwood floors be refinished in one day?
It usually only takes about 2 days to refinish hardwood floors with water based polyurethane. (Some places will do it in 1 day, but I would recommend staying away from those places…it will last longer if you allow more drying time, and each coat needs an extra 2-4 hrs to dry.)
