Fast-setting concrete is ideal for installing fence posts since it doesn’t need to be mixed in a bucket or a wheelbarrow. Once you’ve finished digging your post holes, add about three to four inches of gravel into the bottom and compact it using a post or a 2×4.
What cement mix should I use for fence posts?
In terms of the ratio to use for a concreting fence posts, the best mix is a mix of 1:2:4 (1 cement, 2 sand, 4 aggregate). Concrete is always best mixed using a cement mixer to ensure it’s even, but if you only need to mix a little, hand mixing is ok (see mixing concrete project above for tips on how to do this).
What kind of concrete should I use for setting posts?
Fast-setting concrete
Fast-setting concrete is ideal for setting posts because there’s no mixing—you simply pour the dry concrete from the bag right into the hole, then add water.
How much concrete is needed to secure a post?
A: Finding the right amount of concrete depends on the size of the hole and the size of the post. The diameter of the hole should equal about three times the diameter of the post and the depth of the hole should be about ⅓ to ½ the total length of the pole.
How many pounds of concrete do I need for a fence post?
The table below shows you how many bags of concrete you’ll need per fence post for a 18″ diameter hole that’s between 10 – 36 inches deep.
How Much Concrete For A 6×6 Fence Post?
| Depth | 50 Lb Bags |
|---|---|
| 13″-17″ | 5 |
| 18″-21″ | 6 |
| 22″-25″ | 7 |
| 26″-28″ | 8 |
Which quikrete is best for fence post?
Overall, the 50lb Quikrete Fast Setting Concrete Mix is what I found works best for installing a fence post. It’s easy to work with, sets fast, and is very strong.
Can you use normal cement for fence posts?
3 Answers. Show activity on this post. If the setting time is not an issue, you can certainly use normal quickcrete – or save even more money by purchasing cement and aggregate (sand/gravel/rock) and really making use of the mixer. Standard concrete mixing practice is to mix the dry materials and then add water.
Should I use concrete or cement for fence posts?
Concrete is the most secure material for setting fence posts, especially if you have sandy soil. Gravel may be okay with dense, clay-heavy soil, but in looser soil, concrete is the only thing that will truly keep your fence posts stuck in place.
Can I use quikrete for fence posts?
Quote from the video:
Quote from Youtube video: Setting posts without mixing. Whether you are building a fence sending a mailbox or even a basketball. Goal the best way to make sure your post will stay sturdy and true for years is to set them in
How much concrete do I need for a 4×4 fence post?
For example: A 6′ high fence post 4″x4″ needs a hole 12″ in diameter by about 2′ to 3′ deep. That would take four 50 lb. bags of fast setting concrete mix per fence post.
Is 2 feet deep enough for fence posts?
The minimum depth that you should dig your fence post holes for panel sections is 2 feet. A general formula is to dig the holes one-third to one-half of the post’s aboveground height. The deeper you dig the holes, the more stability your fence has, but you must also purchase longer posts.
How deep should a 6 foot fence post be in the ground?
The depth of the hole should be 1/3-1/2 the post height above ground (i.e., a 6-foot tall fence would require a hole depth of at least 2 feet). Add about 6 inches of QUIKRETE All-Purpose Gravel into the bottom of the hole. Then compact and level the gravel using a post or 2×4.
How do you cement a 4×4 post in the ground?
Quote from the video:
Quote from Youtube video: Once. You have dug your post hole at about six inches of quikrete all-purpose. Gravel into the bottom of the hole then compact. And level the gravel using a post or 2×4. Set the post into the hole.
Is rapid set concrete as strong as normal concrete?
Fast-setting concrete isn’t just simple and fast, it’s also durable and strong, reaching 4000 psi — or pounds of force per square inch —after a month. That’s stronger than the concrete used for foundations on most homes.
Can you use Portland cement for fence posts?
If you must use portland, instead of the just add water type, the mix ratio is 1-2-3. 1 shovel portland, 2 shovels sand, 3 shovels gravel. I add a little Portland cement to sackcrete for a large gate and it works fine, smaller or light weight I just use the bag.
Can I use masonry cement for a fence post?
You can definitely set a fence post using mortar. Although the post won’t be as strong as if you used concrete, it’ll be stronger than just dirt or sand.
Can I mix cement with sand only?
Can I make concrete with just sand and cement? No, you can’t make concrete with only sand and cement. Concrete isn’t considered concrete without aggregates like gravel and stone. It’s the aggregates that contribute to concrete having high strength.
Is Portland Cement and quikrete the same?
QUIKRETE® Portland Cement (No. 1124) complies with current ASTM C150 and Federal Specifications for portland cement. Can be mixed with aggregate and other ingredients to make concrete mix, mortar mix, and base coat stucco. Available in Type I, Type I/II and Type III.
Which is better quikrete or sakrete?
Sakrete tends to have big pebbles in their mix, even though their composition is similar. So, you might have to put enough cement down to cover the rocks. Quikrete, on the other hand, is usually easier to mix and work with.
Should I add portland cement to quikrete?
You can add more Portland cement to bagged concrete to make it stronger. You can also add hydrated lime. To make the strongest concrete, the sand should be sourced from volcanic lava that has a high silica content. This is not easy to locate, and I’d not worry about it.
