The issue may be a combination of flex in the saw blade and your technique. Modern framing blades in particular are very thin, and they tend to track with the wood grain. A cut path that weaves enhances this effect. Try a stiffer blade, and make sure to keep your cut as straight as possible.

Can I use a circular saw to cut vertically?

Quote from the video:
Quote from Youtube video: So it doesn't just come off that easy. It might be safe or it might be a good idea in the future I'm going to make some basis for this technique. So that would be a good idea.

Why won’t my circular saw cut straight?





What Causes a Circular Saw to Not Cut Straight. A faulty circular saw is likely to have issues such as an unstable blade or a warped blade edge. The problem could also be the way you operate the saw. If you do not operate the circular saw properly, it will not cut straight.

How do you cut straight vertically?

Quote from the video:
Quote from Youtube video: And the jigsaw blade should go around here I will use dating centimeters long jigsaw blade I install the jigsaw blade and I make sure it is perfect at 90 degrees with the metallic base.

Why are my circular saw cuts curves?

Check whether the blade is parallel with the edge of the base, the edge that goes against the guide. If the blade is further away at the front, it’s going to want to walk away from the straight-edge. This is probably easiest to do when the base is in the 90 degree position rather than set at a bevel.

How do you cut wood straight with a circular saw?

Quote from the video:
Quote from Youtube video: The key is to use a wide board so that you can keep your clamps clear of the motor of the circular.

How do you cut wood lengthwise?





Quote from the video:
Quote from Youtube video: Giving you a uniform cut from one end to the next. Third be sure the blade depth is set so that the blade just goes barely through the wood maybe about a quarter of an inch.

How do you calibrate a circular saw?

Quote from the video:
Quote from Youtube video: The first thing I do is turn by saw upside out exposing the bottom plate all right then I'll loosen the bevel adjustment exposing the scale all right this scale goes to 55 degrees all the way to zero.

How do you cut a 2×4 straight with a circular saw?

Quote from the video:
Quote from Youtube video: Line the guard on the saw up with the square. Start. The saw before it's. Away. Just a circular saw and a few simple hand tools we're able to make a very square. Cross cut the simple and easy way.

How do you line up a circular saw?

Quote from the video:
Quote from Youtube video: Now if the saw is set accurately and the scale is accurate you can just roll it right down to 45. And you're ready to go. But in old house applications.

How do you adjust the base plate on a circular saw?



Quote from the video:
Quote from Youtube video: Saw is a bevel adjustment set screw so what i do is i'll loosen the bevel adjustment. So that the shoe can travel. I'm going to take my allen wrench and give this just a few turns.

Do circular saws cut up or down?

Circular Saw Cutting Tips



When appearance matters, make cuts with the good side facing down, as circular saws can splinter the wood on the top side. Making your cut line on masking tape can reduce splintering.

Which way should a circular saw blade spin?

Circular saws cut on the upward stroke, which means that they rotate in a clockwise fashion, cutting from the bottom up. This is why when you’re using a circular saw, the side of the wood that will be your “good” side should be facing down.

How do you cut straight with a circular saw without a guide?



1. Cut a straight line without a guide

  1. Prop your board up. Set the board you want to cut on some sawhorses or, set it on some scrap wood. …
  2. Mark your Cut. Measure your board and mark a line where you want to cut. …
  3. Make the Cut. Line your circular saw up with the line you drew.


Which saw cuts straight lines?

portable circular saw

Despite its name, the portable circular saw (or any circular saw, for that matter) cuts only straight lines. The name actually refers to the shape of its blade.

How do you cut long straight lines in wood?



Quote from the video:
Quote from Youtube video: Okay next we're going to take a clamp and we're going to clamp the guide onto the piece of wood that we're cutting and we're placing that guide at the 3. And 1/4 inch mark.

Why can’t I cut wood straight?

Make sure that your table is secure and doesn’t wobble. If the workbench moves around while you’re cutting the wood, your cuts won’t be straight. Make sure that all the legs are even and that the table top is level. Secure the piece of wood to the table.

How do you saw a perfect straight line?

Quote from the video:
Quote from Youtube video: And if I keep turning this piece of wood. Around. Like this remembering which side of the lines of saw. I'm going parallel to the line it's working perfectly I go all the way down the stick this way.

How do you cut a 2×4 lengthwise?

Quote from the video:
Quote from Youtube video: Using a tape and mark it on the 2×4. Using a pencil or pen. Make sure the line is marked at the end of the 2×4 at the point from which you'll start the ripping.