Can I control a ceiling fan with remote and wall switch?

You can wire a new ceiling fan with a remote to a wall switch or retrofit an older fan to accept an aftermarket remote kit.

How do you wire a ceiling fan with two switches and remotes?





Quote from the video:
Quote from Youtube video: So you should have two more wires that run up to your fan a black wire and the unique wire in this case it's my red wire this is the same wire that you wired up in your fan.

Can a fan with a remote have two switches?

Now when one switch is on, the remote will control the light. The other switch will turn the fan on and off.

Can you control fan speed with smart switch?

【SMART BRIGHTNESS & FAN SPEED CONTROL】The smart light switch can adjust fan speed and dim your lights from anywhere with smartphone using the Smart Life App or Treatlife App.

How do you wire a ceiling fan with a remote and one wall switch?

Quote from the video:
Quote from Youtube video: Light box you're going to take the wires hook to your ceiling fan and the wires for your wireless remote and each one is labeled according to where it goes.

How do you get a light and fan switch on separate switches?





Quote from the video:
Quote from Youtube video: The next thing that i'll do is put a couple wraps of black electricians tape around the switch. For safety next dress the wires. Put the switch in the box. And tighten it up.

What do I do with the red wire when installing a ceiling fan with remote?

The red wire is the ungrounded (hot) conductor from one switch, while the black wire is the ungrounded (hot) conductor from the other switch. In the original installation one switch would energize the red wire causing the fan to come on, while the other would energize the black turning on the light.

Can ceiling fans with remote be hard wired?

Then, remove the remote receiver completely. To hardwire your ceiling fan you will need to connect the fan’s power supply to the hard-wiring in your ceiling. This will enable the fan to function via a wall switch. In most instances, the wires inside of a power box are color-coded.

Why is there a red wire in my ceiling fan?

A red wire up in the ceiling fan junction box usually indicates that the wiring has been installed which provides separate switch for the light and a separate switch for the fan motor. If your ceiling fan does not have a light fixture, then simply cap off the red wire and attach the fan motor to the black wire.

How do you control a ceiling fan with a light switch?



Quote from the video:
Quote from Youtube video: For my light. Now all you do is you put it around the copper screw and tighten it up so your power comes in goes through the switch. Out here and to your light. And for your fan.

How do I change the speed of my ceiling fan without a remote?

Since the fan is on the ceiling, the height can be difficult to reach. To turn it on without a remote, all you have to do is purchase a long pull cord to add to the pull switch, so you can operate it without struggling to reach the pull switch or even fumbling for the remote.

Can you operate a ceiling fan with a dimmer switch?

Standard dimmer switches should never be used to control the fan motor on a ceiling fan because the dimmer could damage the fan motor, or overheat and start a fire.

Can you wire a ceiling fan to a light switch?



Most new ceiling fans can be wired to either a single switch or a double switch. With single-switch wiring, power to the fan is controlled by a standard single-pole wall switch, like a regular light switch.

Can a dimmer switch be used as a speed control?

A dimmer switch can add warmth and comfort to any room that has an overhead fan and/or light fixture. It can control the rate at which the fan blades spin season after season and control the amount of light in the room. There are many factors to consider when installing a dimmer switch to control motor speed.

What is the difference between light dimmer and fan speed control?

Talking about the differences between a dimmer switch and a fan speed regulator, the basic one is that the dimmer reduces the voltage. In contrast, the fan control reduces the amperage. The fan speed controller regulates the rotor’s speed by increasing or decreasing the current, or amperage, available to the rotor.

Can you use a dimmer switch on a bathroom fan?

With regard to the OP, you can use a dimmer with a fan as long as you use it on the switched input of a timer fan. The fan takes its power from the permanent live, with the switched input just telling the electronics to activate the timer.

Is dimmer and regulator same?



Fan regulator and dimmer switch are both like rheostat or variable resistor they varies the voltage that enter into the connected device ,like fan it reduces the speed or bulb to reduce the illumination. Dimmer switch and fan regulator can be used interchangeably.

How do I change a dimmer switch to a regular switch?

How to Replace a Dimmer Switch with a Standard Switch

  1. Turn off the power. …
  2. Remove the screws from the switch panel. …
  3. Use a voltage tester on the wires. …
  4. Remove the dimmer switch from the box. …
  5. Attach the new standard switch. …
  6. Push the new switch into the switch box. …
  7. Turn on the power and test the new switch.


How do you install a double dimmer switch?

Quote from the video:
Quote from Youtube video: The ends together if there are two Reds one will actually connect to the white secure. Them together with a wire nut until it's tight and won't turn anymore.

What happens if you put a non dimmable LED bulb in a dimmer?



So what happens if you use non-dimmable LEDs on a dimmer? Well, at best the bulb just won’t dim properly. At worst, though, you might damage the bulb. You see, dimmable LEDs have special circuitry inside that allows them to respond to varying current levels or “pulsing” current waves to produce a dimming effect.