How do you separate two lights on the same switch?

3 Answers

  1. Get a 2-gang box to replace your existing 1-gang box.
  2. Get a new switch.
  3. Remove your existing box and install the 2-gang box in its place.
  4. Run your supply hot wire to both switches.
  5. Connect the light/fan hot wire to one switch and the exterior light to the other.
  6. Join all neutrals and ground wires.





Can you combine 2 light switches together?

The 2 incoming wires to the switches should probably NOT be connected together, unless they both go back to the same breaker in the panel.

How do you connect two lights to two switches from one power source?

Quote from the video:
Quote from Youtube video: As you can see I got two wires coming out but this power has to be split between two switches alright so I mount this in here. So that's in there now so now I got the power wire coming out.

How do you convert a double light switch to a single light switch?

How to Make a Double Light Switch From a Single Light Switch

  1. Ensure all power is off.
  2. Remove the old switch.
  3. Identify the switch wires.
  4. Disconnect the wires from old switch.
  5. Connect wires to new switch.





Can you wire two lights one plug?

yes but use a proper enclosed connector not just a connector strip (no not even if you tape over it!). Plenty on the market, sold for under cabinet lighting ect. some plug together, if using this type ensure ‘plug’ half goes to lamps ‘socket’ half to mains so if unplugged no live pins!!

What is dual switch?

Double switching, double cutting, or double breaking is the practice of using a multipole switch to close or open both the positive and negative sides of a DC electrical circuit, or both the hot and neutral sides of an AC circuit.

Can you daisy chain light switches?

Daisy chaining is a simple way to connect two or more light fixtures. Multiple light fixtures operated by a single switch can be most easily wired through a process known as “daisy chaining.” This is a simple, serial wiring scheme that connects the wires of the light fixtures one to the next in a single circuit.

How do you wire two switches and lights using the same power source?



Run 12-gauge electrical cable between each switch and the light it controls. Pull one end of each cable through the back of one of the light fixture electrical boxes. Strip both ends of each cable with a knife, separate the wires and remove 1/2 inch of insulation from the end of each.

How many light switches can be connected together?

The basics of light switch wiring



The load of the fixtures is what determines how many lights a circuit can accommodate. A conventional 15A circuit can have up to 1400W of lighting loads connected to it. A 1400 Watts lighting load can accommodate one 1400W fixture or fourteen 100W fixtures.

How do I add a second light switch to an existing light?

Quote from the video:
Quote from Youtube video: Now i can connect the switches to the hots i put my red switch feed which was the old switch leg out to the old light slide that into the switch. And take my new hot wire.

Can I use a double pole switch as a single pole?



A double pole switch can be used to control light and a fan or 2 lights on separate circuits. It is easy to wire a double pole switch to work as a single pole switch because only one side is used instead of both.

How do I add a switch to a light fixture?

  1. Turn Off Power. Wiring a switch to light is fairly simple. …
  2. Mark Location. …
  3. Cut Drywall. …
  4. Run the Cable. …
  5. Strip Wires. …
  6. Wire Ceiling Fixture. …
  7. Connect the New Switch. …
  8. Add Switchplate.
  9. Can a pull chain light switch be converted to wall switch?

    If you’d like to get rid of your pull chain fixture and replace it with a switched fixture, there’s no need to do any wiring to add a wall switch. Disconnect the old fixture, install the controller in the junction box, connect the wires to the new fixture, and install the wireless switch anywhere on the wall.

    What is a three way switch?

    A 3-way switch is larger than a single pole switch and has three screw terminals for wiring connections, plus a ground. Two of these take traveler wires that go from one switch to the other. For the third terminal, one switch is connected to the hot supply wire while the other switch is joined to the light.

    How do you add a switch to a pull chain light?

    Quote from the video:
    Quote from Youtube video: And there's not so now that the old light is off we see that we have a 12 2 with ground bringing energy electrical energy into the box. You have two conductors the black and the white and you have the

    How do you wire multiple pull chain lights?



    Quote from the video:
    Quote from Youtube video: So all you really have to do is run another wire from the other octagon box where the other light will be so that will be a 14 to again. And you're going to have a black and white wire in each one.

    How do you wire a light fixture with a pull chain?

    Quote from the video:
    Quote from Youtube video: So we're going to put the red wire underneath. The clamp on the breast. And tighten it down. Make sure that you snug the screw terminals down tight onto the wires.

    What do you call a light with a pull chain?

    A lazy Betty is a pull-cord light switch, which may be operated from a bed.

    Can you add a pull chain to a ceiling light?

    Yes, that’s right. Adding a pull chain to a light fixture could even save you money!

    What is a pull switch used for?



    A pull switch provides a very convenient way to turn on or off electric power for lights. A pull switch is a switch that breaks or makes an electric circuit by pulling a string or a chain. It is a good choice in situations where extensive electrical wiring may not be suited, such as in damp and wet areas.