How do you dispose of old wooden post?
Quote from the video:
Quote from Youtube video: So first what you'll do is you'll attach a piece of wood or something to the to the post. You'll you'll screw that in with a couple of bolts or screws. You'll build a little base.
How do you get rid of rotted fence posts?
Quote from the video:
Quote from Youtube video: This can hold m up to m12 screws but what i'm going to be using is an m10 200 millimeter screw you want the longest screw that you can get because you want to screw down through the rotten fence post
How do you get old fence posts out of the ground?
Dig the Post Out by Hand
The most common way to get stubborn fence posts out of the ground is simply to dig the earth out from around the concrete base. It is possible to do this with nothing more than a standard shovel or spade and plenty of time.
Do I need to remove old fence posts?
A common scenario: an old fence needs to be removed to make room for a new installation. We typically recommend leaving the cement from the old posts in the ground and offsetting the posts of the new fence. We can remove the old piers, but it’s a much bigger job than most people realize and it can get expensive.
How do you get rotten fence posts out of concrete?
You can dig around the post hole, and then use several long pry bars to lever the concrete footing out of the ground. If the wood left inside the footing is not completely rotten, then you can sometimes screw a large eyebolt into the wood and then pull it out with a rope or chain.
How do you straighten a fence post without removing it?
If the fence post is bent, you can straighten it using a hammer and a piece of scrap wood. To straighten a fence post, drive a screw into the ground next to the post. Use a hammer to strike the post until it bends back into shape.
Why do fence posts rot?
The main cause is the wood having prolonged exposure to moisture in soil which means fence posts decay at ground level – just above the concrete base. This means the post will still be solid below and above the damaged area. Insect infestations can also cause rotting in wooden fence posts.
How do you remove a broken post from concrete?
Top tip: If you’re struggling to make any headway with a cemented fence post, you can use a sledgehammer to break some of the cement off the bottom and loosen the post, or you can get under the cement with a crowbar to loosen the ground from underneath the post.
How do you remove a 4×4 post from the ground?
To remove wooden posts from the ground:
- Screw a block of wood to the side of the post.
- Stack concrete blocks next to it to form a fulcrum.
- Position a 2×4 under the block of wood and over the fulcrum.
- Using the 2×4 as a lever, pull down on it to pull the post out of the ground.
How do you get T posts out of the ground?
Quote from the video:
Quote from Youtube video: But the truth of the matter is you want to go forward and back in other words if you're facing the T if the if the lower part of the T is pointing to you you want to go forward.
How do you remove a metal fence post from the ground without digging?
Saturate the ground around the base of the post with water from a garden hose. Let the water soak in until the ground is muddy. Wiggle the post back and forth to loosen it. Even if it doesn’t move very much, any amount of loosening of the soil around the base will make it easier to remove.
How do you get metal post out of the ground?
Position a garden hose to be running into the ground where the T-post is. While water flows freely into the post hole, start rocking the T-post back and forth. You will continue this motion until the ground loosens around the T-post and you can pull it free.
Can you reuse metal fence posts?
Whether the fence is over your property line, or maybe the fence was installed badly, you can actually pull chain link fence posts and reuse them. Though it isn’t technically challenging to dig out a fence post, it can be hard work, especially if your posts are set in concrete.
How do you remove a metal pole from the ground?
Use the Jack for Removing Steel Fence Posts
Put the end of the chain on the jack tongue and crank the jack. Keep a close eye on the chain to ensure that it doesn’t slip or move. Once you lift the pole and slab enough, you should have someone help you lift them out of the ground and carry them away.
How do you dig out a pole?
Quote from the video:
Quote from Youtube video: Once you've got enough stuff dug up and you can drill some holes drill some holes. Again. Be safe if you've never drilled metal before it might very well be difficult.
How do you remove a metal fence post?
Quote from the video:
Quote from Youtube video: And then you use your weight to push back on this lever. And it slowly pulls the fenceless out of the ground once you make a little progress you move it down a little bit you only have a shot tape.
How do you remove metal from chain link fence posts?
Quote from the video:
Quote from Youtube video: What you do is you'll dig down on one side of that pole and as you dig down on this one side just dig it down a little bit then you'll grab the pole. And just rock it back and forth back.
What is the easiest way to remove chain link fence posts?
Chain Link Fence Removal
- Step 1: Remove clamps from corner post. Remove the clamps from one of the corner or end posts one end at a time. …
- Step 2: Cut fence ties and detach the chain link. Next, cut the wire fence ties or metal strapping that holds the chain link fence to the top rail. …
- Step 3: Remove the Fence Posts.
What can I do with an old chain link fence?
If your old chain link fence is of good quality, you can take it to your local recycling center for recycling. You can also recycle your old chain link fence through a scrap metal company. When it’s rusted beyond repair or recognition, you may take a look at it and decide that it’s useless.
