https://youtu.be/JK6esDuKPMQ

How do you rough-in a basement toilet?

Quote from the video:
Quote from Youtube video: The back wall off. The back framing to the center of the toilet. We like to make our 13 inches. So we're 13 inches off the framing to the center of the toilet flange.

How do you rough-in plumbing a bathroom?





Quote from the video:
Quote from Youtube video: To any adjacent wall or adjacent plumbing fixture. So that means 15 inches of clearance to the left. And 15 inches to the right that's code minimum.

Can bathroom be built in basement?

If you have chosen to add a basement bathroom, that’s great. A bathroom in your basement is useful if you have guests over a lot or if you have a rental unit. Also great if your family spends a lot of time in the basement. A bathroom remodel is also a smart investment to increase the value of your home.

How does a bathroom work in a basement?

These systems work like a septic tank in the sense that they are enclosed container that sits beneath the concrete floor, they collect the bathroom waste water and then pump it up-and-out of the basement into you existing septic system.

Does a basement toilet need a vent?

A typical bathroom like the one we show (sink, toilet, shower or tub) requires a 2-in. vent. You could run smaller pipes to the sink or shower, but it’s usually easier to use one size for the whole system.

How do you frame a basement bathroom?





Quote from the video:
Quote from Youtube video: We got one more part of the framing to go and that's the frame around this furnace duct we'll frame around that. And then the drywall attached to that framing. And make a little soffit.

Can a toilet and shower share the same drain?

The general answer is that the showers and toilets can use the same drain, but they should not be sharing the same waste trap arm. There are other factors to consider as well, such as whether your drains lead to the main sewer line, or if there are septic tanks that are used in your city or town.

Can a toilet and sink share the same drain?

Run the lower sink drainpipe, adding elbows or collar connections as needed to reach the 3-inch drainpipe that runs from the toilet. The configuration depends upon your bathroom layout and the direction of the floor joists, but connect the sink drain to the toilet drain within 6 feet of the toilet, if possible.

Can a washer and toilet share the same drain?

This isn’t uncommon. Your washing machine might have been placed in between your toilet and sewer stack. * If your toilet and washing machine drains are connected, they have the same venting system. This can cause your toilet to gurgle when your washer drains.

Is it worth putting a bathroom in the basement?



Adding a bathroom to your basement makes it livable space, which increases the overall market value of your home. A bathroom in your basement can also be a huge selling point for buyers if you are ever looking to sell. When a basement is unfinished with no bathroom, buyers look at the basement as wasted space.

Does adding a bathroom in the basement add value?

Adding a basement bathroom can increase your home’s resale value by 10%-20%. It also can turn a wasted space into an enjoyable addition to your home. The average basement bathroom will cost $3,000-$25,000, depending on the existing plumbing and condition of your basement.

How is toilet waste from a basement toilet removed from the basement?

Basement Toilets with Ejector Pump



An ejector pump such as the Superior Pump sits in a sump basin under the bathroom’s plumbing. When the wastewater level in the basin reaches a certain level, the basement toilet pump turns on and begins pumping waste to the level of the main drain.

Where do you vent a basement toilet?



To connect the vent, first try to find a dry vent in the house plumbing and tap into that. If you have none, you take the vent outside and up along the siding. Some people terminate the pipe below the soffit, while others take it through the soffit and go above the roof.

How far can a toilet be from a vent stack?

6 feet

According to the UPC, the distance between your trap and the vent should be no more than 6 feet. In other words, for the vent to work properly, it needs to feed into the drain line within 6 feet of the trapways that connect to it.

What happens if a toilet is not vented?

Poorly-vented drain lines will not be able to effectively move wastewater and solid waste out of your building. This could lead to problems such as overflowing drains, backed-up toilets, and similar plumbing issues.

How do you vent a bathroom with no outside access?



Installing a ceiling vent is probably the most efficient way to ventilate a bathroom with no outside access. A ceiling vent is a unique machine that allows air to escape from the bathroom. In other words, it’s a machine that, like an open window, allows moisture to escape from your bathroom.

Do plumbing vents have to go through the roof?

It does not have to go through the roof. From the plumbing code (I have the 2003 edition), P3103: It must not be less than 4 feet directly beneath a door, openable window or other air intake of the building or adjacent building.

Can you put a cheater vent on a toilet?

Don’t worry if you do not have a vent pipe in your house, or if it is blocked and you can’t fix it. Instead of thinking about massive construction projects, you can use an Air Admittance Valve, well-known as a cheater vent.

Can two toilets share the same vent?

Most houses have more than one toilet, and if they are on the same side of the house, their waste lines can usually tie into the same stack. If they are on opposite sides, however, each may need its own stack. Since the stacks must be vented, this would mean two vent openings on the roof.

Does each toilet need its own vent?



“Does a toilet need a vent?” And the answer is yes, your toilet has to have a vent. For more information on the great importance of plumbing vents, read our plumbing vent article here. And the size of this vent pipe depends on your local plumbing code.