Does a Sub-Zero refrigerator need a dedicated circuit?

Answer: All Sub-Zero, Wolf, and Cove appliances require a dedicated electrical circuit. Installing a unit on a shared circuit can cause product malfunctions or damage to the unit.

Is it code to have a refrigerator on a dedicated circuit?





In the US, under the NEC, a residential kitchen fridge is not required to be on a dedicated circuit. It is certainly a good idea and best practice, but not a requirement. A fridge can be on one of the minimum two required “small appliance branch circuits”.

Does a refrigerator need a dedicated circuit NEC?

Refrigerator Amps and NEC Requirements



Most appliance manufacturers thus recommend their refrigerators to be installed on a dedicated circuit, meaning an independent one that only serves the refrigerator, with a 15 or 20 amp circuit breaker or time-delay fuse.

Which appliances need a dedicated circuit?

Dedicated circuits are highly recommended for all these devices:

  • Electric oven, stove, or range.
  • Refrigerator.
  • Stand-alone freezer or chest freezer.
  • Dishwasher.
  • Microwave.
  • Garbage disposal.
  • Toaster oven.
  • Countertop convection oven.

How many amps does a Sub-Zero refrigerator use?

General

Model BI-36R/S
Weight 420 lbs
Freezer Capacity 23.5 cu. ft.
Electrical Supply 115 VAC, 60 Hz
Electrical Service 15 amp dedicated circuit

How many amps does a Sub-Zero freezer use?





The refrigerator manufacturer is stating here that their appliance should have a total amp draw of 11 AMPS or less. This rating and spec for the Sub-Zero includes both compressors, the defrost heater, all motors and other loads found on the appliance.

Can you have 2 refrigerators on the same circuit?

Even with all of these cautions, there may be some cases in which you must plug two refrigerators into a single outlet. In this case, you can install a split-wired receptacle that serves two circuits in your home. This allows you to draw from two separate circuits, rather than overload one.

Does a freezer need a dedicated circuit?

Upright and chest freezers require a 120 volt, individual, properly grounded branch circuit with a 3 prong grounding type receptacle, protected by a 15 or 20 amp circuit breaker or time-delay fuse. The freezer should be on a dedicated circuit.

Can a freezer and refrigerator be on the same circuit?

You can plug a freezer and a refrigerator into the same outlet if their total draw doesn’t exceed the capacity of the circuit. But again, if they start at the same time, their total draw will spike significantly, tripping the breaker in the process.

Does a refrigerator need a special outlet?



Refrigerator – Most refrigerators work with a standard 100-120 volt electrical plug and outlet. You will notice that the electrical plug is made up of three prongs; this means you will need an electrical outlet that has three inserts.

Does a refrigerator need to be on a GFCI?

In a dwelling unit (residential), GFCI protection is only required for kitchen receptacles that serve the countertop surfaces. There’s no requirement to GFCI protect receptacles that serve a refrigerator. Unless the fridge is plugged into a countertop receptacle.

Can a refrigerator share an outlet?

Refrigerators are considered noncontinuous duty loads. Loads that draw current for less than three hours at a time are allowed to be on the same circuit with other noncontinuous loads, as long as the total load does not exceed the circuit breaker rating.

What is a dedicated circuit?



A dedicated circuit is used by one appliance only. Meaning the circuit is not shared with any other devices or appliances. Nothing else is able to draw energy from this circuit. The purpose of the dedicated circuit has one purpose. It also had it owns circuit breaker, which should be labeled in your electrical box.

What size breaker do I need for a refrigerator?

A refrigerator needs a 20 amp circuit breaker for a proper power supply. Most modern-day refrigerators require a 20 amp circuit breaker by the manufacturer. Although your refrigerator may need more or less than 20 amps to operate properly, it will depend on the model of your refrigerator.

How do you install a dedicated outlet?

Quote from the video:
Quote from Youtube video: Now you just tighten the two tabs and the box is installed strip the ceiling of the wire to about one inch from where it enters the box.

How much does it cost to install a dedicated circuit?

Most homeowners pay $130–$300 for this process. Most electricians charge $40–$100 an hour for labor. Most unfinished basements require slightly more expensive ground fault circuit interrupter outlets. The type and location of the outlet and the need for additional electrical work impact the total cost.

What is a dedicated 15a circuit?



This tells you the amperage that the circuit can handle, which directly translates into the number of Watts it can deliver to the appliances that are connected to the circuit. A 15 Amp breaker can handle up to 1,800 Watts.

What is code for electrical panel?

NEC code states that panels must have clearance of 36 inches in front, 30 inches to the sides, and a working area with a clearance of 6 foot 5 inches. You’ll likely need a permit to move an electric panel. A garage or basement is ideal because it meets all these requirements.

What is code for electrical outlets in kitchen?

In kitchens, electrical outlets should be placed no farther than 48 inches apart, so that no point on the countertop is more than 24 inches away from a receptacle. Any countertop 12 inches wide or more should have an outlet on the wall behind the countertop.

How do I choose a subpanel?

The size of a sub panel for a workshop should be a minimum of 60 amps up to 100 amp power feed from your house or main service. This is assuming that you have at least a 200 amp main service. It should be 120/240 volt single phase.