How do I extend my garbage disposal drain?

Quote from the video:
Quote from Youtube video: So you need the proper washer insert the retention nut. And the nylon washer. And loosen up there p-trap. And install the extension tail piece. And stole another retention nut.

Can you extend P-trap?





Re: P-trap: slip joint extension tube



Yes, that extension piece is what you need. You’ll just need to trim it significantly to fit in that space you indicated on your pic.

What size is the discharge pipe on a garbage disposal?

1 1/2-inch

Food and water goes straight through the drain into the disposal. The disposal also has a standard 1 1/2-inch pipe connection on the side to connect to your kitchen’s drain piping.

Can garbage disposal drain be lower than drain?

The drain into the wall needs to be below that of the disposal and sink, there’s no way to beat gravity with this. Your options are to: Raise the disposal output (with a different disposal) Raise the sink (with a different, shallower sink, or at least a shallow drain for the disposal)

What if new kitchen sink drain doesn’t line up with existing pipes?





In general, if the P-trap doesn’t line up with the drain, you can adjust the length and height of your drainpipes by cutting them or simply slipping them in and out of their fittings.

Does a garbage disposal need its own P trap?

Like the other drains in your home, your garbage disposal requires a P-trap because of the safety and health benefits. A P-trap does several things when incorporated into your plumbing, from trapping debris and grime to keeping sewer gasses from entering your home.

Can a p-trap be higher than the drain pipe?

You attach the p-trap directly to the drainage and manuever the p-traps exits into you existing drain. It is not ideal to have the p-trap below the the exit drain because water gravity has to force the water out instead of it flowing downwards naturally.

How do you lengthen PVC pipe?

Using Pipe Extenders



You may also extend PVC pipes with special fittings called extenders. These pieces have a small end that fits inside a pipe and a larger end that matches the outer diameter of the pipe you connect. From the outside, therefore, the pipe will appear to be all one size.

Why does my p-trap smell?



A p trap is designed to use water to block the sewer gases from leaking up the drain. If a sink’s p trap dies out this can result in a drain that smells bad. To alleviate this problem pour water down the drain to restore the water barrier in the p trap.

Can AP trap be too deep?

When the trap is too deep, liquid may flow through it too fast, which can lead to siphoning of the trap seal and sludge buildup. The drain connection at the wall is too high on this sink, resulting in a 9-inch-deep trap seal — 5 inches deeper than is allowed by code.

How high should drain be for kitchen sink?

The standard height of a kitchen sink drain from the floor is between 20 and 24 inches. This varies based on the vanity, sink, and trap.

Where is the P-trap on a garbage disposal?



A P-trap is the curved, U-shaped pipe under your sink that catches and traps food debris and holds water to prevent sewer gases from coming up through your drain. Clearing the clog typically involves the simple removal and cleaning of the P-trap.

How do you unclog a garbage disposal trap?

Use a Natural Cleaner



If the clog is due to food waste buildup, create a natural cleaning solution using ½ cup vinegar and ¼ cup baking soda. Mix the solution well and pour it into your drain. Leave it for about 10 to 20 minutes, and then pour hot water into the drain.

How do you clean out a garbage disposal trap?

Begin by pouring baking soda into the garbage disposal. Next, pour vinegar down the garbage disposal. Then, wait 20 minutes for the fizz to break down the clog. Last, wash away the mixture and food waste down the pipe with hot water.

Does AP trap have to be level?

Fixture traps must be self-cleaning by nature. This means that with each use, it must be able to flush away unhindered by lint or hair. You must install a trap level in relation to its trap seal.

How do you tell if P-trap is working?



Is your P-trap working properly? If you detect any foul odors near the P-trap that remind you of a smell similar to rotten eggs, then it means that there is hydrogen sulfide present. This, and other harmful gases, bacteria, and viruses, can get into the house if your plumbing trap has malfunctioned.

Can you put AP trap under the floor?

One acceptable variation which allows putting the “P” trap under the floor is to take a horizontal run of about a foot to slow down the force of the water hitting the trap under the floor.

Do you need AP trap for a kitchen sink?

Even if you are meticulous about never dropping things down the drain, you still need a p-trap under your sink to keep gas out. Sewer gases can rise through the drain pipes in your home, but the u-shaped bend in the p-trap collects water. This water blocks the gases from rising up into your sink.

What happens if you don’t have ap trap?

When p-traps aren’t properly installed, they can become damaged and leak toxic sewer smells into your home. Below are common p-trap problems you can run into: Dry p-traps occur when the trap or interceptor has lost its water seal, allowing sewer gases to build back up through the drain and into your home.

What is the difference between AP trap and as trap?



The only difference between a P-trap and an S-trap is the horizontal length of pipe on the outflow side which allows you to connect the vent. You can turn an S-trap into a P-trap by adding this pipe — it should be at least 4 inches long — and connecting a vent to it.