If your working some large areas or going over taped seams then your choice should be the mud. It goes on smooth and is very easy to sand. Spackle is great for small holes but not really good for this much work.
Do I need to mud after removing popcorn ceiling?
You need to properly sand the ceiling once you remove the popcorn and top off the bad seams and the dings. Priming the ceiling before painting will be a wise move. Painting on bare drywall will absorb the paint’s moisture and will not allow even distribution of the texture.
What do you put on ceiling after removing popcorn?
Quote from Youtube video: And rough edges of the sheetrock joints be conservative with your mud if possible the lighter the coat you put on the easier it is to sand.
How do you finish drywall after removing popcorn ceiling?
Quote from the video:
Quote from Youtube video: Like one of the common ones is that you just scrape it get it all scraped off fix a few things and then you're ready to texture.
How do you smooth a ceiling after removing popcorn ceiling?
If you notice any small holes or blemishes, you can use a drywall compound with a putty knife to fill them. Apply the compound in a nice skim coat to make it smooth. This will help you skip out on any extra sanding that may need to be done.
How do you mud a ceiling?
Quote from the video:
Quote from Youtube video: So basically you just want to get your mud up there fill your knife not completely full of mud just kind of control it keep it in the center. And you're gonna come back and wipe it. Down.
What is the best primer for ceiling?
Start with an interior latex primer.
Choose a high-build primer like KILZ High-Build Drywall Primer (available on Amazon) if your ceiling has a deeper texture (e.g., popcorn)—these products not only prime but also fill in grooves and imperfections in the ceiling.
Can I mud over popcorn ceiling?
Quote from the video:
Quote from Youtube video: If you mix it too thin you're gonna have to do multiple coats to cover this popcorn ceiling it's going to take two coats of skin.
Does removing popcorn ceiling increase home value?
Removing popcorn ceilings will almost always increase a home’s value. Not only is the design trend no longer desirable, but it also poses safety concerns for home buyers. To understand further, it helps to learn more about why popcorn ceilings were once a popular design choice—as well as why they no longer are.
How much does it cost to skim coat a popcorn ceiling?
Hiring a Contractor. Skim coating a room yourself costs you about $50 in materials and $430 in tools if you don’t have the tools already. Hiring a local drywall contractor is usually $50 to $100 per hour, and the average room takes four to six hours to complete—totaling a labor cost of about $200 to $600.
Can you use spackle on ceiling?
DON’T cheap out—buy the right tools for ceiling repair.
If the crack is a very thin hairline—and it’s been there for a while—odds are you can simply put a little spackling on a finger and smear it carefully into the crack, taking care to wipe away residue from the surface.
What does it mean to mud a ceiling?
Drywall compound, commonly referred to as mud, textures ceilings in a wide variety of patterns. These patterns add character and interest to your room and break up the monotony of a flat ceiling. As an added benefit, textures conceal imperfections, stains and repaired areas.
Can you use drywall mud for ceiling texture?
Textured ceilings perfectly camouflage imperfections like cracks or evidence of water damage. There are a variety of techniques you can employ to create your texture of choice (way beyond the “popcorn” look popular in the 1970s). All it takes is a mixture of paint and drywall mud—and a little ingenuity.
Can you use drywall mud for popcorn ceiling?
This tactic involves adding drywall mud over the surface of the ceiling, applying joint compound, and lathering on a finish compound with a utility knife. Rather than scraping or covering up the popcorn ceiling, you could replace it altogether.
What kind of mud do you use for a stomp ceiling?
Type of Mud
As with any texture, all purpose joint compound or topping compound should be used as these types of mud contain more glue like properties which allow the mud to adhere properly to the drywall surface. The consistency of drywall mud used is the key to creating a good stomp knockdown texture.
How do you mud a textured ceiling?
Quote from the video:
Quote from Youtube video: Just basically want to keep that mud. Up. So now what you want to do is you want to do it in sections. And do a third no more than a third of the ceiling at a time roll.
How much drywall mud Do I need to texture a ceiling?
It generally takes 1-1/2 to two full buckets of mud to texture the walls and ceiling of an average size (12 x 12-ft.) room.
What is the most popular ceiling finish?
Popcorn Ceiling Texture–
Popcorn is the most common ceiling we see, also known as “cottage cheese” to some. This texture seems to be the most detested of homeowners we meet with on a regular basis.
