How do you choose curtain rod brackets?
Ideally, the smaller the gap between your drapery panels and the wall, the more aesthetically pleasing the overall effect will be. The type of return bracket you need depends on what is also going to be installed on the window in question, and how far that item projects out into the room.
What size rod do you use for grommet curtains?
Sizing. A grommet that is 1/4 inch larger than the rod diameter slides smoothly along the rod. For example, a common 1 5/8-inch grommet glides over a 1 3/8-inch diameter rod.
Do you need 3 brackets for curtain rod?
Over 96 inches, a third rod bracket is required as a center support; this is mandatory! Having said that, a 2 inch or 3-inch diameter pole can span a distance up to a full 12-feet without flexing or bowing using only two end brackets.
How many brackets do you need for a curtain rod?
Most rods require support brackets every 30 to 36 inches. So if your window is longer than 60 inches across, you’ll need two center support brackets. Center support brackets hold up longer curtain rods.
What size curtain rod do I need for 36 inch window?
A curtain rod size of 28 to 48 inches will suit any window up to 36 inches in width. These are the small windows in a home, such as in a bathroom or the window on a door.
How Big Should curtain rod be?
Standard curtain rods typically come in sizes ranging from 24″ – 144″, while mini and small curtain rods range from 12″ – 48″. If you’re looking for a more custom look, try measuring the width of your window and adding 4-6 inches on each side to account for the hardware.
How far should curtain rod extend past window?
As a general rule, drapes will be open during the day, so make sure the curtain rod extends at least four inches on each side of the window’s inside frame. To create the illusion of a wider window, extend the rod up to 10 inches beyond the window’s frame.
How far can a curtain rod span without support?
1 ⅜” Wooden rods and 1 ⅜” Designer Metals can go 60 inches without support. 2” Wood can go up to 96” and should have support brackets if high up. Wrought iron can go up to 96” without support but is heavy so support is safer. It’s safe to support every splice and joint on a rod.
What are the different types of curtain rods?
Types of Curtain Rods
- Caffe Curtain Rod. Usually used for picture windows. …
- Traverse Curtain Rod. Traverse rods can be regular or decorative. …
- I-Beam Curtain Rod. …
- KS Track Curtain Rod. …
- Extendable Iron Rod. …
- Decorative Iron Rod. …
- Wooden Curtain Rod. …
- Clean/Acrylic Curtain Rod.
Should curtains touch the floor?
You should aim for your curtain hem to be about 3/8″ to 1/2″ above the floor. Not only is this an easier length to measure for, but it also makes it simple to vacuum and sweep. It’s a great option if you plan to open and close your curtains a lot since you won’t need to rearrange them each time.
How wide should curtains be for a 72 inch window?
How Wide Should Curtains Be For A 72-Inch Window? Let’s say you want standard, thick curtains to cover your 72-inch window. You’ll want to look for curtains that measure between 144 and 180 inches wide.
What size curtain rod do I need for 48 inch window?
To accomplish that, you would need to make sure the curtain rod is at least 20 inches larger than the original window size of 48 inches, or 68 inches. This would result in all 48 inches of window glass showing when curtains are fully opened. Most ideal!
How many rings should a curtain panel have?
Calculating Curtain Ring Needs
One ring goes at each pleat to hang the panels securely. For flat panels, you usually need one ring for every 4 to 8 inches of curtain rod length. Heavier drapes need more rings that are closer together, while lightweight fabrics are usually fine with rings every 7 or 8 inches.
Do curtain rings have to match Rod?
It depends. If you can see all the windows at the same time, then yes. You might even need the same drapery between rooms if your home is very open concept-like. The more obvious separation there is between rooms, though, the less you need to be concerned with coordinating rods between them.
How far apart do you space curtain rings?
I like to space ring clips approximately four inches apart so that there is a handsome fold between each clip in the drapery panel. Start by clipping each end of the panel. Next, clip the middle. Finally, space the clips evenly apart as close to 4 inches as possible.
