Thermostat White Wire (“W1” or “W2” Wire) W wires go directly to the source of heating; that may be a furnace (gas, electric, oil, you name it) or heat pumps (mini-split heat pumps included). W2 is designated for two-stage heating. Most heat pumps include second-stage heating and require the white W2 wire.
How do you wire a dual thermostat?
Quote from Youtube video: Link remove programmable thermostats or standard thermostat trace the wires back to the wiring Center remove them from the wiring Center.
What color wire goes where on a thermostat?
This is the most typical thermostat wiring style, and it applies to systems that regulate both heat and air conditioning. The wires are typically arranged as follows: red for 24-volt hot, white for heat, yellow for cooling, green for the fan, and blue for common (although the common wire may be a different color).
Which wire is which thermostat?
Thermostat Wiring Tips
If your thermostat controls your heat, you will have a white wire. The Y wire is yellow and connects to your air conditioning compressor. The G wire is green and connects to the fan. Rc and Rh: The red wire(s) are the power source for your thermostat.
Why is there a jumper between R and RC?
In most cases, the heating and cooling system share a single transformer by leaving the jumper in the lower right corner it connects the RC and RH to power heat and cool features.
How do I set up multiple thermostats?
When you do have multiple thermostats installed, here’s what you should do:
- For the summer: Set the upper most floor’s thermostat to the temperature you want. …
- For the winter: Invert this process, which means the bottom floor should be your set temperature and the floor above it should be two degrees cooler.
Why do I have two thermostats?
Having two thermostats wired to the same HVAC unit allows you to evenly condition your home. With the use of zones, control, and dampers, you can regulate your home from top to bottom. However, installing two can be complicated. Multiple thermostats allow for more accuracy and efficiency.
What happens if you wire a thermostat wrong?
Potential consequences of improper installation could include: Electric shock. Blowing a circuit breaker. Damaging the thermostat unit, the electrical system or even the AC/furnace unit itself.
Where does the red wire go on a thermostat?
The red wire should be connected with the Thermostat RH terminal. You can also connect it to the RC terminal with a jumper wire between the RH and the RC. If you only have one R terminal for both heating and cooling, connect it to that.
Where does the blue wire on a thermostat go?
The Blue or C Wire
C wires or varying colors apply to every thermostat, but blue C wires belong to thermostats attached to a heat pump. Blue wires are for heat pumps. This wire connects to terminal B on your thermostat.
Does R wire go to RH or RC?
An R wire can go into a Nest Learning Thermostat’s Rc or Rh connector.
Does red wire go to R or RC?
If you have both an Rh (Red-heat for powering the heating) and an Rc (Red-cool for powering the cooling), then the R wire can be connected to either Rh or Rc. If you only have a single R wire, then it will only have an R connector, which is the connection you’ll use.
Are R and RH wires the same?
R , Rh , and Rc are all the same, but not. In general terms, the R terminal is where you connect the signal voltage source. In low voltage controlled systems, there will be a step down transformer that provides the power to the control circuitry.
What does RH and RC stand for on a thermostat?
RC: The RC terminal is the 24-volt cooling power supply. RH: The RH terminal is the 24-volt heating power supply. (Note: The RC and RH terminals are jumpered together in a four-wire heat/cool system and a single-stage heat pump system but not in a five-wire heating/cooling system.)
What is R and RC on a thermostat?
Rh stands for Red-Heat and Rc stands for Red-Cool. If you only have a single red wire the jumper between Rh and Rc are required for some heating and cooling hybrid systems depending on your thermostat.
What is the difference between RH and RC thermostat wires?
There is no standard for the colour of the RH wire, but most units use a red one. The RC wire, on the other hand, refers to “red cooling”. It’s the same with the RH wire in that it powers the thermostat. For the RC, it powers the cooling system.
Is RC wire same as C wire?
Typically, the wires that provide the power (often called the “hot” wires) are labeled Rc (cooling) and Rh (heating). They provide a source of 24V power coming from the HVAC control board. Sometimes they are separate wires and require separate connections. Other times they are the same wire.
Can you put RC wire on C wire?
No the Rc is the red wire. You need 5 wires or more for this to run with all the functions. You can use one of the other wires but you have to drop control of the fan.
What color is the C wire?
Blue wires
Blue wires are also called “C” wires because they are the Common wire. C wires are necessary for any “smart” thermostat that needs to be connected to a power source 24/7, regardless of your heat pump type.
