The main reason you need to have your water heater placed on a hot water heater stands is to prevent fire incidents. Lifting your water heater prevents flammable fumes and vapors’ from spilled gasoline or any other combustible fluid from lying on the floor in the garage.
Should a gas hot water heater be elevated?
How high should my gas water heater be off the ground? Your gas water heater should be 18 inches off of the ground, as per the National Fuel Gas Code. This is the standard for water heater installation requirements.
Are water heaters supposed to be raised?
Water heaters only need to be raised (per code) if they are using an ignitable fuel source (gas, propane, etc). And even then, the code is that the ignition mechanism is what needs to be raised. If your water heater is electric or a heat pump, no need to raise it per code.
How do I raise my water heater?
Generally speaking, there are three ways to lift your water heater: use straps, use a lift, or lift it manually. Of course, if you have a large capacity gas water heater it will be heavy. Get some help. You can buy water heater straps at just about any hardware store.
Can a gas water heater sit directly on the floor?
Gas water heaters can sit directly on the floor if they are FVIR(flammable vapor ignition-resistant). All gas 30, 40, and 50-gallon water heaters sold to the North American market after 2005 must comply with ANSI Z21. 10.1a-2002 standards and are FVIR.
Why would water heater be raised?
The pilot light from your water heater is the flame that will ignite the fumes from any spilled flammable liquids. If your water heater is NOT a flammable vapor ignition resistance water heater, it must be raised to 18 inches if it is located in the garage where a car would be parked.
Does a water heater need to be on a pedestal?
Electric water heaters do not have mandated FVIR technology and may cause a small spark when heating. Electric water heaters should be placed on a stand unless documentation is provided by the installer/manufacturer that verifies FIVR construction.
Does a water tank need to be on a slab?
It is essential to have your rainwater tank on a FLAT LEVEL COMPACTED BASE. The base of your Rainwater tank must be fully supported at all times. You should inspect your base regularly to ensure the base is not being eroded and that animals or insects are not undermining the base.
Can you put a gas water heater in a garage?
“FVIR certified gas water heaters can be installed on a residential garage floor without the use of an 18-inch stand in accordance with the National Fuel Gas Code, NFPA 54, ANSI Z223. 1, unless otherwise directed by State and Local code requirements.”
Does water heater need to be elevated in garage?
Height requirement for water heater installed in a garage
According to the Uniform Plumbing Code, a natural gas tank water heater should be installed at least 18 inches from the ground. It’s also important to note that this measurement doesn’t necessarily start at the bottom of the unit.
What is code for a water heater in a garage?
7 Water Heaters Installed in Garages.
Can a gas hot water heater be in a closet?
Water heaters can be installed in bedroom or bathroom closets, if necessary or preferred, but only if they’re an electric, direct vent or sealed combustion chamber unit. Other water heaters that use fuel combustion are not permitted to be installed in bedrooms, bathrooms or closets that open into these rooms.
Does gas water heater need to be vented?
Venting. All natural gas water heaters must be vented to the outdoors to remove the byproducts of combustion. Atmospherically venting gas water heaters is the most common type of venting option used.
Can you sleep in a room with a water heater?
It is perfectly safe to sleep in a room with an electric water heater. Gas water heaters should not be placed in a bedroom unless they are direct vent type or separated by a weather-stripped self-close door. The combustion air must always be drawn from the exterior.
