How do I hide my furnace and water heater in my basement?

Perhaps the simplest way to hide your furnace and water heater is to add a sliding curtain as a divider. You will need to measure the wall height to determine proper curtain length, as well as the needed width. Be sure to give a few inches of clearance so the curtain doesn’t touch your heater.

How can I hide my furnace in my basement?

Thus, you are wondering how to hide a furnace in your finished or unfinished basement.

Options for accomplishing this include the following:

  1. Curtains.
  2. Room divider.
  3. Cabinetry or other furniture.
  4. Framed furnace closet.
  5. Placing the furnace under the stairs.
  6. Strategically placed storage.

Can you enclose a furnace?

Many homeowners intend to use basements or other areas where a furnace may commonly be installed as an additional space. This can be for simple storage, using the space as an entertainment or receiving area or other reasons. The answer is yes, of course you can enclose your furnace.

How do you enclose a furnace room?

How to Enclose a Furnace Room

  1. Mark Walls of Furnace Room. Snap chalk lines on the floor to indicate the location of the walls you want to install. …
  2. Mark Location of Door. …
  3. Cut Boards for Sill Plates. …
  4. Install Sill Plates. …
  5. Determine Wall Stud Height. …
  6. Cut Top and Bottom Boards. …
  7. Cut Wall Studs. …
  8. Frame Non-Door Walls.

Is it OK to enclose a water heater?

Water heaters must be surrounded by a certain amount of clearance, or air space, to function properly and safely. A clearance area of 12 inches is required on all sides of a hot water heater. A certain amount of airflow is also required for proper combustion and ventilation.

How close can things be to a furnace?

30 inches away

At a minimum, all storage around the furnace should be at least 30 inches away from the furnace itself. Furnaces need proper airflow to work properly. Restricting airflow can be dangerous, and it can also undermine the efficiency of the furnace. However, some items should not be in the furnace room no matter what.

How do I hide my hot water heater?

Ideas for Hiding a Hot Water Heater

  1. Add a Closet. If you have the space, you can hire a contractor to install drywall and a door. …
  2. Create a Hot Water Cover or Cabinet. Creating a cabinet is a great option if you want something less permanent than a closet. …
  3. Hang Curtains. …
  4. Use a Room Divider or Screen.

How can I hide my heating system?

Quote from the video:
Quote from Youtube video: We can put this out it's a two inch rigid insulation with a grid system that will hold that tubing in place to make it with a vapor barrier.

How do you block out a furnace?

To block off a heating vent with sheet magnet, start by measuring the height and length of the vent. Then, cut out a piece of sheet magnet that’s the same size as the vent. Once you’ve cut out the piece of sheet magnet, stick it over the vent and you’re finished!

What is code for space around furnace?

Furnace Room Clearance Requirements

Each county or municipality establishes space requirements and safety regulations for furnace rooms. A general standard is to have at least 30 inches of space between the walls and a furnace’s sides.

Does a furnace room need ventilation?

Does a furnace room need ventilation? Most new building codes require that spaces that house gas-fired appliances such as water heaters and furnaces have an outside ventilation source to provide combustion air. Electric Furnaces or water heaters do not need ventilation to support combustion.

Do you need a louvered door furnace room?

A furnace room needs a louvered vented door. The louvered door allows venting to get combustion air into the furnace room. When the furnace pushes air into the home, it needs an equal amount of air to go back into the furnace room to work efficiently.

Can I enclose my water heater and furnace?

A Sealed Combustion Closet Can Safeguard the Air Supply

Enclosing the furnace and water heater in a sealed combustion closet can keep dangerous exhaust fumes out of your indoor air. To work effectively, the closet must: Be thoroughly sealed so no air can leak out into your living space.

Can I build a wall around my hot water heater?

You can enclose the water heater by building a wall around it and constructing a utility closet.

How much ventilation does a water heater need?

As a general rule, water heaters need 50 cubic feet of air per 1,000 BTUs/hr. For example, a water heater with an input of 40,000 BTUs/hr should be in a room (often the garage) with at least 2,000 cubic feet of air.

Does a furnace closet need a vented door?

For safety, you need the required venting, but as long as you extend pipes to the roof or outside walls, you do not need to worry about the closet. Space and heating issues are much more important concerns in closet installation.

Should a water heater closet be vented?

When a residential, gas fired water heater is installed in a closet, the heater combustion gases must be vented to the outside of the residence and the fresh air needed for combustion must be drawn in from outside the home using double wall metal pipe; single wall pipe is not permitted.

What is code for venting a hot water heater?

Clearance to combustibles: for gas fired water heater vents: 6″ minimum clearance from single-wall vent pipe or flue-vent connector to any combustible material. Single wall vent pipes cannot pass through a ceiling, floor, firewall, or wall.

Can a gas water heater be vented out the side of the house?

The exhaust gases and excess heat produced by your water heater are then vented back outdoors. A direct vent water heater uses special coaxial venting that has separate chambers for intake air and exhaust in a single assembled vent piece. The venting runs from the water heater through the side of your home.

Why does a hot water heater have to be 18 inches off the ground?

Why does the water heater need to be 18 inches off the ground? It’s not to avoid impact by a garage or other items, as some people may think. The clearance is to prevent fires or explosions if a flammable liquid (such as gasoline or motor oil) spills on the garage floor.