For deeper or wider scratches, take a putty knife and apply wood filler into the crack, wiping off excess while still wet. Sand down dried wood filler with 180-grit sandpaper, avoiding the surrounding floor. Apply matching colorant to wood filler, also.

How do you repair deep scratches in hardwood floors?

Quote from the video:
Quote from Youtube video: As possible for a slightly larger or deeper scratch another option is to apply a melted wax in a closely matched color to the scratch.

Can a scratch in hardwood be repaired?





Getting scratches out of hardwood flooring is easily achievable. With a little elbow grease, a small can of stain, and a fine-grit sandpaper, you can repair scratches on any wood floor. After sanding in the direction of the grain, apply a tiny amount of stain. If you are nervous using stain, try a walnut.

How do you repair gouges in engineered hardwood floors?

Use a smooth-edged flexible steel putty knife to apply the wax or putty filler to the hole in the floor. Put just enough filler on the knife end to fill the hole with only slight excess. Apply the filler to the hole moving at an angle that is diagonal to the length of run of the floor board or gouge or hole.

How do you fill gouges in wood?

Quote from the video:
Quote from Youtube video: You just want to lightly rub over it with your finger. So that it feathers into your existing finish. Then you want to select your heart fill stick.

Does vinegar remove deep scratches from wood?

A 1:1 mixture of cooking oil and white vinegar is the most effective way to remove scratches from wood furniture. Dip a rag in the mixture, and rub it on the scratch. Allow the mixture to sit for 1-2 minutes before wiping away excess liquid.

How do you fix big scratches?





Quote from the video:
Quote from Youtube video: And we're going to be doing that with four simple steps first we need to clean the entire panel to remove any dirt and oils. So we don't contaminate the scratch.

Does Murphy’s oil Soap remove scratches?

Heavy-Duty Cleanup



And stains, marks and scratches can be removed easily from waxed floors using Murphy Oil Soap.

Can you use wood filler on hardwood floors?

Can I Use Wood Filler on Wood Floors? Unless the gap is seasonal and will close eventually, you can use wood filler to repair narrow gaps and cracks. Fillers can be water or solvent-based.

Are wood putty and wood filler the same?

Wood putty is denser than wood filler, and it’s so pliable you typically have to apply it with a putty knife. Like window glazing or plumber’s putty, wood putty is a mixture of plastic and oil-based solvents. Because it doesn’t harden like wood filler, wood putty won’t shrink or crack, but you can’t sand it.

What kind of wood filler should I use?



The best option for indoor projects is Elmer’s Carpenter’s Wood Filler Interior. This little tube makes it easy to apply to cracks, splits, and holes on your painted surfaces. It’s formulated to resist cracking and shrinking and can be sanded to a perfectly smooth finish.

How does olive oil fix scratched wood?

Mix equal parts olive oil and vinegar, which work together to remove dirt, moisturize, and shine wood. Pour a little directly onto the scratch. Let the polish soak in for 24 hours, then wipe off. Repeat until the scratch disappears.

Does Old English Scratch Cover work?

While this product does work BUT it leaves a lot of stain/residue behind. If you put this in a desk and then dont clean it up throughly, expect the color to transfer to anything you put on the table. also, if you clean it thoroughly, it looses its effectiveness.

Can you use olive oil on wood floors?



Olive oil naturally hydrates and polishes wood floors without leaving behind the dirt-attracting film common with store-bought products. It can clean and polish your floor at the same time or allow you to quickly buff dull areas back to a stunning sheen.

Can you use Murphy’s oil on hardwood floors?

Whether you’re cleaning one area or all of your flooring, Murphy┬« Oil Soap is safe to use on hardwood floors.

Can you use Dawn dish soap on hardwood floors?

Dish soap is a gentle cleaner that won’t damage the natural wood, and it’s perfect for light jobs and daily upkeep alike. In a large bucket, mix two to three tablespoons of dish soap with one gallon of warm water. Dip your mop and wring it over the bucket, then gently mop the surface of your floors.

Does vinegar hurt hardwood floors?

The finish is the protective layer of your wood floors. Since vinegar is an acid, it will actually break down the finish on the surface of your floor, and over time it will reduce the shine, and leave a dull appearance.

Can I use baking soda on hardwood floors?



Don’t use vinegar or baking soda.



Many DIY home cleaning solutions involve the use of vinegar or baking soda, but these are, in fact, the worst things you can apply to your wood floors. They actually damage and dull the polyurethane, which can irreparably ruin them.

What do professionals use to clean hardwood floors?

You can use a commercial wood-cleaning product, like Bona or Murphy Oil Soap. Be sure to follow the manufacturer’s instructions. You can also make your own cleaner by mixing one part vinegar to 10 parts warm water. Add a few drops of liquid Castile soap.