How do I prepare an epoxy subfloor?
Lightly sand the floor surface to ensure proper adhesion of the resinous flooring. Remove all dust with a vacuum cleaner. Prime the surface with 100% solids epoxy primer (Perdure E02). The application of two coats of the primer may be necessary due to the porosity of the plywood.
Can you use epoxy on natural stone?
ANSWER – It is not recommended to put an epoxy coating over the surface of any stone. First because it traps in moisture and stone needs to breath to avoid deterioration. An epoxy coating will wear over time leaving traffic patterns. It is major and expensive job to refinish an epoxy coating.
How do I install Everlast epoxy?
Quote from the video:
Quote from Youtube video: To create a seamless floor and baseboard system install all the cove base first and then trowel your floor protect the wall finish with blue painters tape.
How do you remove epoxy pebble from concrete?
Because the coating is so durable, it’s hard — but not impossible — to remove. With the use of an epoxy solvent, you can break down the coating. Once the solvent thins it sufficiently, you can remove the loosened gravel and epoxy by carting it away. This will leave your concrete deck completely clear of the material.
Do I need to grind floor before epoxy?
Acid etching a garage floor is a great solution for those who are installing the floor themselves and do not have access to industrial grinders. However, for larger commercial jobs, older concrete, or worn floors we always recommend grinding before epoxy installation.
Can you do epoxy floor over subfloor?
Certainly! There are two approaches to this process. One process is to install a self-leveling concrete over plywood followed by an epoxy system. The second approach is to install a flexible epoxy coating over plywood followed by a typical self-leveling epoxy mortar.
How do you pebblestone a floor?
Quote from the video:
Quote from Youtube video: Then pour two bags of pebbles into a seventeen dollar metal tub and pour the blended resin over the pebbles mix the resin in thoroughly with a mud mixing drill be sure to blend it thoroughly.
Will epoxy bond to stone?
If you have a crack in the stone and it is too narrow to get either knife-grade or flowing epoxy into it you can use a penetrating epoxy. This glue will seep into a hairline crack, bonding everything it touches on the way down and into the stone.
What kind of epoxy do you use for stone?
Installation Product #17 Epoxy Adhesive for Bonding Stone Overlays typically uses the #17 Epoxy Stone Adhesive, and clean hard dry stone. A 3 gallon unit of Product #17 will typically mix with about 400 lbs. of stone.
What is the solvent for epoxy?
Acetone
Removing epoxy resin alone
Resin should be removed with a rather aggressive solvent, such as one that is MIBK (methyl isobutyl ketone) based. Acetone or lacquer thinner also work but are extremely flammable.
How hard is it to remove epoxy flooring?
The best way to remove epoxy from a concrete floor once it has cured is to use a tool such as a putty knife or a chisel and just scrape away. If necessary, use a hammer to break up the epoxy. However, to avoid damaging the surface, it is better to use a plastic scraper after first softening the epoxy.
How do you remove sticky residue from epoxy floor?
Rub down the spot with denatured alcohol or acetone to remove any remaining epoxy. The denatured alcohol or acetone cleans the surface so that the new resin will adhere to the old epoxy correctly.
What happens if you don’t etch concrete before epoxy?
New concrete must be etched before applying the epoxy. The smooth surface of unaltered concrete won’t bind with other materials, such as epoxy or paint. As a result, epoxy will peel and lift away, failing to adhere to the surface.
What do you clean concrete with before epoxy?
Quote from the video:
Quote from Youtube video: Today we're going to show you how to prep your concrete floors before you apply an epoxy floor coating the first way I'm going to show you is with muriatic acid.
Do I need to etch concrete before epoxy?
The short answer is: Yes, even new concrete needs to be etched before applying epoxy or a similar type of garage floor coating. Etching is part of the concrete preparation process. In fact, proper preparation of the concrete before a coating is applied is the most important part.
How do you prepare a concrete floor for epoxy coating?
Before you apply any coating, you need a clean, dry floor without debris, moisture, cracks or holes. Give the area a thorough sweep. Clean up any grease stains with a degreaser and a stiff brush. You don’t need to remove all of the discoloration, just the greasy residue.
How do you etch concrete before epoxy?
Quote from the video:
Quote from Youtube video: Process so the first step of this process is actually going to be using a muratic acid to actually etch this floor to get it rough enough.
How do you sand a concrete floor for epoxy?
Quote from the video:
Quote from Youtube video: I started by connecting my shop back to the grinder. And began grinding the edge of the floor. Linear action for the edges is ok but for the inner portion i suggest doing so in little circles.
How do you sand a floor before epoxy?
Quote from the video:
Quote from Youtube video: So now we're going to use a slow rpm 175 rpm floor buffer with a 60 grit sanding screen on the bottom and we're going to sand. The surface of the epoxy.
Can you epoxy over rough concrete?
Quote from the video:
Quote from Youtube video: What will happen is the concrete will start breaking. So what you have is the epoxy detaches itself nothing not the epoxy breaking.
