How do you frame a basement ceiling?

Quote from the video:
Quote from Youtube video: That's double banding anytime you go across the bottom of your floor joists to get below an obstacle like that it's called banding framing.

Can you have a concrete ceiling?





There are various types of concrete ceilings. In buildings that have multiple stories, and the exposed concrete ceiling is most common. It’s usually the underside of a concrete slab which forms both the floor and the ceiling.

How do you attach framing to concrete?

Quote from the video:
Quote from Youtube video: So the method that I use is very simple and relatively. Quick. So I basically have a hammer drill right here and on the hammer drill is a drill bit that can drill through both wood and concrete.

How do you anchor a wall to a concrete slab?

Quote from the video:
Quote from Youtube video: And in order to anchor in place. I use these drop-in anchors they're ideal they push in you need a masonry bit and you have a quarter-inch Hilty bit here that I haven't a porter-cable drill.

How much can a concrete ceiling hold?

When completely healthy and showing no signs of wear and tear, a concrete roof can safely support around 1,200 pounds (0.54 t) per square foot.

How far can you span a concrete ceiling?





Reinforced concrete allows a wide range of structural options and provides cost-effective solutions for a multitude of situations—from residential buildings with moderate live loads and spans of about 25 ft, to commercial buildings with heavier live loads and spans ranging from 40 ft to 50 ft and beyond.

How do you frame a concrete basement wall?

Quote from the video:
Quote from Youtube video: And a couple of impact nails and what this does is this drives down it's a three inch nail goes through the one-and-a-half inch plate into the concrete. And even if it isn't completely buried.

How do you attach 2×4 to concrete?

Quote from the video:
Quote from Youtube video: So instead of sitting there drilling for an hour and a half we're gonna use our ram. Set. Again it is super fun to use and it is super super quick now what i usually do is tack the wall with one nail.

Can you build a wall on top of concrete?

While you can build a retaining wall on an existing concrete slab, you must first make some adjustments. Never place your wall directly onto the concrete. Doing so will result in a wall that shifts across the foundation. It will also break or fall with time.

How much weight can a 5 inch concrete slab hold?



5 = 72.5 pounds per cubic foot or 72.5 pounds per cubic meter. A 6-inch thick slab weighs 72.5 pounds per square foot, the maximum allowable weight. Do you know the weight of a 4-inch-thick slab of concrete? The weight per square foot is 47.85 pounds when divided by the number of decimal places in the formula (4/12).

How much weight can a 6 concrete slab hold?

A 6-inch concrete slab with a 700 psi compression strength can hold 1,105 psi of pressure. In 7-inch thickness, it could sustain 1,194 psi, while in 12-inch thickness, it could support 1,563 psi.

How much weight can a concrete ceiling anchor hold?

Masonry and concrete anchor types are considered light-duty, medium-duty or heavy-duty, based on how much weight they can support. Light-duty anchors are good for wall hangings that weigh up to 50 pounds. Medium-duty anchors are good for wall hangings that weigh up to 200 pounds.

How much weight can a ceiling joist hold?



Ceilings in single-story homes are only designed to support a constant load of 5 lbs/SqFt., plus a live load of 10 lbs/SqFt. This varies by the span of the joist and the size, grade, and species of lumber used.

How do you install anchor bolts in concrete ceiling?

Quote from the video:
Quote from Youtube video: Step one is to drill a hole to a minimum of 45 millimeters. It's important to over drill to this depth as to leave room for dust build-up within the hole. Step. Two is to position the fixing.

How deep should anchor bolts be in concrete?

The hole needs to be drilled 1/4″ deeper than the anchor will penetrate. The hole can’t be drilled while the fixture is in place due to the fact that the hole is larger than the diameter of the bolt being inserted into it.

How close to the edge of concrete can you put an anchor?

Don’t Drill too Close to Edges



To avoid these disasters, don’t drill any closer than 4 in. from the edge. If there’s no other option, turn off the hammering action on the drill. Also, avoid wedge-type anchors.