Vinyl. Vinyl siding is a common alternative to fascia board. This type of rafter facing does not rot or wear as quickly as fascia board under the same weather conditions.

What material is best for fascia?

Typically for fascia boards, cedar and redwood are popular choices given their resistance to rot from excessive moisture. However, if you prime and paint the fascia, then fir, spruce, and pine can also make beautiful choices from a design standpoint.

Can composite wood be used for fascia?

Composite fascia boards usually replace old wood or metal fascia boards. These types of boards were designed in an attempt to get the full richness of texture that a wood look gives you, but the durability and the longevity that is needed for fascia because it is on the front lines.

Is fascia trim necessary?

Fascia trim is a necessary and expected trim for your home. Not only does fascia trim look good and create a finished edge look to your home, but it has a great purpose as well.

How do I cover my fascia board with vinyl?

Quote from the video:
Quote from Youtube video: First nail under sill trim in place along the top of the fascia board then nail F channel along the bottom of the fascia board to determine the width of fascia panel measure.

What is behind a fascia board?

The soffit board is tucked away under the fascia board. It is usually the board that you see most of from street level. The soffit can be ventilated to allow the flow of air into the roof area.

What are the three types of fascia?

There are three main types of fascia:

  • Superficial Fascia, which is mostly associated with the skin;
  • Deep Fascia, which is mostly associated with the muscles, bones, nerves and blood vessels; and.
  • Visceral (or Subserous) Fascia, which is mostly associated with the internal organs.


Can I use Trex decking as fascia?

Quote from the video:
Quote from Youtube video: If a perimeter board and fascia is used we recommend installing the fascia. First so that the square edge board can overhang which provides a neat finish to the surface.

Is Trex fascia PVC?

This product is called Trex Trim which is an all PVC material that is smooth on the surface and lighter in weight. We also have Trex Fascia in Universal White which comes with an embossing grain pattern.

What is Hardi Senepa?

HardieFlex® Senepa 9.0mm is a versatile fascia board suitable for all types of houses. It can be used to highlight intricate roof designs and it operates as backing for gutter systems to prevent water and vermin from entering the structure through the eaves line. It is fire-resistant and deemed to be non-combustible.

What is Friezeboard?

Frieze board is a type of trim that is typically installed between the top of a home’s siding and the soffit. It’s normally installed flat against the home, but it may be installed at an angle if installed on a gable. Frieze board may also be used as a decorative, horizontal trim anywhere in or on the home.

Can I nail vinyl fascia?

Do not nail vinyl fascia under any circumstances. When overlapping fascia panels, first cut a notch in the underlying panel. The notch should be 1/8˝ deep by 1-1/2˝ long.

What is vinyl fascia used for?

The fascia is nailed to the ends of the roof rafters, and is used to attach a gutter to the roof and soffit panels underneath the eaves. When installing new vinyl siding on your home, you can install vinyl trim on the fascia.

Can you replace wood soffit with vinyl?

While there are short-term costs to replacing wood soffits with vinyl, in the long-term, you’ll see reduced upkeep and repair expenses. While painted wood peels over time, the color on vinyl soffit is embedded in the material, so you will not need to repaint the soffit.

Do they make vinyl fascia?

Vinyl fascia is a type of trim installed on the front of the house.

What is house fascia made of?

Fascia is normally made of timber or wood, but can be found in PVC, aluminum, and vinyl as well. It’s typically installed at the same time as your roof or gutters in order to help complete this area of the home.

What is the difference between fascia and trim?

Trim is the material used to encase windows and doors, among other features, on a home’s exterior. Fascia is a horizontal or angled board that encloses the edge or face of the projecting eaves.

What is the difference between fascia and soffits?

Typically a soffit is used in the area beneath the eaves on the exterior of a house to close the space beneath the eave. The soffit extends from the side of the structure to the edge of the eave. Fascia is used to create a barrier between the edge of the roof and the outside.

How do you replace fascia board yourself?

Quote from the video:
Quote from Youtube video: Now cutting the nails that are holding those rafters in place or fascia in place is the next step it's got to be done you can do that with either out metal cutting blade on your sawzall.

Is it hard to replace fascia boards?

Luckily, replacing a fascia board is as easy as taking out the old board and fitting a new one in its place. Once you’ve installed a new board, all you need to do is seal the seams and paint it to match your home. With a short afternoon renovation, you can have new fascia boards that will last for years!

How do you fix rotted wood fascia?

Soffit and Fascia Repair

  1. Remove Shingle Mold. Pry the narrow shingle mold from the fascia using a flat bar. …
  2. Remove Rotted Fascia. Remove the rotted section of fascia. …
  3. Remove Old Soffit. Pull down to remove the old soffit. …
  4. Remove Rotted Rafter. …
  5. Attach Cleat. …
  6. Attach New Rafter. …
  7. Seal Replacement Soffit. …
  8. Attach Replacement Soffit.