How do I get my TV to play through my surround sound?

If you want to connect your TV to a surround sound system, your TV needs to have an audio output. On modern TVs, this will usually be an optical digital audio output or an HDMI ARC connection. Once you have identified your TV’s audio output, you need to connect this to an audio system that supports surround sound.

How do I connect home theater components?





Quote from the video:
Quote from Youtube video: Will each need an HDMI cable. The TV will actually have two cables one HDMI to send the picture from the receiver to the TV. And a digital optical cable to send the sound from the TV to the receiver.

How do I connect my home theater to my TV and cable box?

Connect a Coaxial Digital Cable, Optical Digital Cable, or Audio cable to the Audio Output jack on your TV. Connect the other end of the cable to the corresponding jacks on the A/V receiver or home theater system. Depending on your device, the audio input may be labeled TV INPUT or VIDEO INPUT.

How do I connect my DVD player to my home theater system?

Connect the HDMI cable to the HDMI OUT of the source device. Connect the other end of the HDMI cable to the HDMI IN on the A/V receiver or Home Theatre system. Using a second HDMI cable to the HDMI OUT of the A/V receiver or Home Theatre system. Connect the other end of the HDMI cable to an HDMI IN on the TV.

How do you wire a 5.1 surround sound system?

Quote from the video:
Quote from Youtube video: All we do is take the banana plug labeled black and push. It inside the black binding post repeat the process with the red lastly we're going to connect the fifth speaker.

Can HDMI carry 5.1 surround sound?





Actually only HDMI can give full 5.1 effect with latest codecs such as Dolby TrueHD, Dolby Digital+, DTS Neo, DTS-HD, etc. SPDIF only supports 5.1 with Dolby Digital and DTS or older codecs such as Dolby Prologic II. The latest 5.1 codecs use much higher bandwidth than what is supported by SPDIF.

How do you wire a home sound system?

Quote from the video:
Quote from Youtube video: Running cables within 18 inches of electrical cables. If you were forced to cross cables. Always do so at a 90 degree angle to reduce the risk of picking up unwanted electrical hum in your audio.

How do you hook up a home theater wire?

How to Wire Your Home Theater

  1. Connect all the outputs of your playback devices into the rear of the AV receiver.
  2. Connect an output cable from your AV receiver to your display device – usually a TV or projector.
  3. Connect your speakers to your AV receiver with speaker wire: how to connect speaker wire.


Which speaker wire is best for home Theatre?

  • #1 Best Overall: Mediabridge 14AWG 2-Conductor Speaker Wire. …
  • #2 Best Gauge Speaker Wire: MaxBrite High Performance 12 Gauge Speaker Wire. …
  • #3 Budget Speaker Wire: Gear IT 16 AWG Speaker Wire. …
  • #4 High Quality Speaker Wire: eXtreme 14 Gauge Speaker Wire. …
  • #5 Best Speaker Wire for Home Theater: InstallGear 12 Gauge Speaker Wire.
  • How do you connect two DVD players together?



    You will need to purchase a 4-pole 3.5mm Jack to Jack lead to connect both DVD players together: Insert your DVD movie disc into one player and connect using its AV OUT socket to the second DVD Player using it’s AV IN socket.

    Can I connect speakers directly to my DVD player?

    You can use the same set of speakers for all your home entertainment products by connecting your speakers to the TV. If you have an HD (High Definition) TV it is recommended that you use an HDMI (High Definition Multimedia Interface) cable to get superior audio and video from your Blu-ray or DVD player.

    Can I use DVD player as amplifier?

    Yes, generally Samsung DVD player requires TV to play Mp3 sound output. But some have Inbuilt amplifier with jacks for sound output. To play Mp3 without TV you need external speakers.

    How do I connect my 5.1 speakers to my DVD player?



    How to Connect 5.1 Speakers to a DVD Player

    1. Unplug the DVD player and subwoofer from the electrical outlet. …
    2. Connect the white and red plugs on each end of the audio cable from the left and right audio outputs on the DVD player to the matching inputs on the back of the sub.

    What can you do with an old DVD player?

    Below are 11 inventive projects you can try during your free time to reuse your old CD or DVD player.

    1. Add Bluetooth to an Old DVD Player.
    2. CD-ROM Into Vintage Speaker.
    3. Macro Lens From an Old Player.
    4. A USB Player From a DVD Player.
    5. DVD Player Becomes an Audio Amplifier.
    6. Arduino Mini Laser Engraver.
    7. Make a Burning Laser.

    How do I connect my DVD player to my AV Receiver?

    Quote from the video:
    Quote from Youtube video: Snap. Take the other end of that Toslink cable and plug it into the optical port listed as audio one on the back of your AV. Receiver. Take the other end of that optical cable and insert.

    How do I connect HDMI to a receiver without arc?

    If the TV has no ARC label on its HDMI ports, connect the HDMI cable to any HDMI ports on the TV and to the HDMI OUT (ARC) on the home theatre system or home audio system. Then connect an optical cable to the optical output port of the TV and the DIGITAL IN (TV) port on the home theatre system or home audio system.

    How do you hook up a DVD player to red white and yellow?



    Newer DVD players typically come with an HDMI cable, which you can simply plug into the TV and DVD player. However, older models may come with a composite cable. To use this, connect the red, white and yellow plugs into their respective ports on both devices.

    How do I hook up my DVD player to my TV and stereo?

    If your TV only has one audio input, you can connect the left and right audio outputs of the DVD player to a Y adapter (not supplied) and then connect to your television. When connecting with a HDMI cable, use the HDMI cable only, no other video or audio cables are required with this type of connection.

    What input should TV be on for DVD?

    HDMI: The most modern connection, HDMI resembles a longer, thinner USB cord. HDMI connections are the highest quality connections and you only need one cord for both the audio and video. A/V Cables (Three-Prong): Standing for Audio/Visual cables, this the most common connection for DVDs.

    How do you hook up a DVD player to a flat screen TV?

    How to Connect a Flat Panel TV to a DVD Player

    1. Check the back of your DVD player. …
    2. Look at the back of your flat panel TV for a series of “In” jacks corresponding to your DVD player. …
    3. Connect the “In” jack from the TV to the corresponding outlet on the DVD player, using the proper cable (RCA, HDMI or S-Video).