Can you mix and match PEX brands?
The pipes, fittings and tools are system specific so don’t try to mix and match across various manufacturers as you will void the warranty.
Can I connect PEX A to PEX B?
Youtube quote:The recommended method to transition is to use a pex b insert style fitting into both the pex a and pex b pipe we'll use the crimp ring on the pex.
Can you use crimp fittings on PEX A?
Crimp fittings require copper or stainless steel crimp rings and a PEX crimp or clamp tool. Some manufacturers use O-rings on their metal fittings (manufactured to ASTM 2434 standards) to make the seal with the tubing. Crimp fittings are compatible with all types of PEX tubing, except for PEX-AL-PEX.
Is PEX tubing interchangeable?
Push-to-connect can be used interchangeable with most types of copper tube size pipe, including PEX, copper and CPVC. No special tools are needed to make these connections. Also, the fittings can be easily removed and reused.
Is Apollo PEX-A as good as Uponor?
These are classified based on the way the are manufactured. Pex-A is the only type that Uponor manufactures and is considered to be the best. Apollo manufactures both Pex-A and Pex-B.
Is Auspex a PN20?
The new Auspex Fire pipe and fitting system offers a cost effective range of specialised sprinkler and B-Press connections, and unique PN20 PEX Pipe. Feel secure working with the complete range of Auspex fittings with over 25 years in the Australian plumbing industry.
How can I expand my PEX pipe without tools?
Youtube quote:Expanding. And then put it in the fitting. And that believe it or not will shrink back to its original size and it'll be tight on that fitting. And that's all there is to it.
How can you tell the difference between PEX A and PEX B?
Again, the main distinction lies in the manufacturing method, which is what assigns an A, B or C to PEX. PEX A is made using the Peroxide, or Engel, method. PEX B is formed using Silane, or Moisture Cure, method. This is the most common PEX pipe type out there.
Which is better PEX A or PEX B?
Bottom line, PEX A is more resistant to burst pressure than PEX B. PEX A’s expansive material can handle up to 500 PSI, which makes it reliable in extremely cold temperatures. Since PEX B is a more rigid material, it will not hold up as well in similar situations.
Are PEX A fittings different than PEX B fittings?
Flexibility – PEX-A is the most flexible, allowing for it to be fastened by cold expansion, which allows the end to be fluted prior to inserting the fitting. PEX B is not expandable and you should never expand the end of a PEX-B pipe. Kink-Resistance – PEX-A has the greatest resistance, PEX-B the lowest.
How do you remove PEX fittings?
Youtube quote:Carefully cut through the heated portion. Away from the fitting with utility knife be sure not to cut the tubing. Because doing so could damage the fitting. Work the ring off of pliers.
Which PEX fittings are best?
PEX-A, which has the most flexible tubing and best freeze- and kink resistance, is ideal for use with kitchen and bath fixtures. PEX-B is slightly less flexible and less freeze-resistant.
Is it better to crimp or clamp PEX?
If you are looking for a fast and more secure connection that will stand the test of time, crimp tools are your better option. But if you want more flexibility without working more, go for PEX clamps.
Why do my PEX fittings leak?
The leaching of zinc also makes the fittings weaker, resulting in dezincification. In PEX pipes, the zinc build-up can cause your kitchen and bathroom fixtures to clog. It also causes fittings to crack or break, leaking water within your walls or underneath your house.
Is PEX expansion or crimp better?
PEX crimp equipment is a lot more affordable than the expansion kits. However, despite the pricing and form shortcomings, most plumbers prefer to work with expansion because installation is more efficient. There are fewer leaks, and it also seems to be more durable against extreme colds and frozen pipes, etc.
What is the difference between PEX and expansion PEX?
The main difference between these two fitting types is the way they are installed and the pipe that is used. Cold-Expansion is installed by expanding the pipe (PEX-A) and collar which is installed over the end of the pipe using a power expansion tool. Manual hand tools are also available for small jobs.
Can Uponor PEX be crimped?
Typically, PEX-a is used with cold expansion fittings (F1960) or Uponor / Wirsbo’s brand name Propex fittings. Other expansion fittings that can be used are F2080 or Rehau’s Everloc fitting. PEX-a can also be used with all crimp fitting and push-fit style methods.
What is a PEX expander?
Youtube quote:And more expansions will be required in colder temperatures where the tubing is less flexible. After expanding quickly remove the tool and put the pro pecs fitting in place pushing.
Do I need a PEX expander?
Pro: Because PEX B doesn’t require an expansion tool, the joining method is faster and simpler than the process for PEX A. In cold or hot weather, the joining method workflow remains the same. Con: Because PEX B fittings are smaller in diameter, this joining method downsizes the diameter of the pipe at the joint.
How do I extend a PEX line?
Youtube quote:And we'll just take a piece of plastic pipe we slide our fitting. In put the clamp. Over. This tool hook the up the teeth in there squeeze down on. And that's it extra squeeze and there we go.
