How do I disassemble my kitchen faucet?
Quote from the video:
Quote from Youtube video: You. May need to spray penetrating oil on the mounting nuts that secure the faucet to the sink. Wait about 15 minutes then turn the nuts counterclockwise to remove them.
How do you take apart a single handle kitchen faucet?
- Loosen the screw that holds the handle onto the faucet. Turn it clockwise until the handle comes off, using an Allen wrench or a screwdriver. …
- Loosen the screws or nuts that hold the cartridge in place. …
- Locate the seals at the bottom of the cartridge.
- Remove the Faucet Handle. Examine the faucet handle to determine how it is installed. …
- Remove the Retaining Nut. Loosen the cartridge retaining nut, using a pipe wrench or tongue-and-groove pliers. …
- Remove the Old Cartridge. …
- Buy a New Cartridge. …
- Install the New Cartridge. …
- Complete the Installation.
- Step 1: Turn off the water. …
- Step 2: Remove the cap on top of your faucet. …
- Step 3: Remove the hidden set crew. …
- Step 4: Remove the faucet handle. …
- Step 5: Rinse off mineral deposits.
- Turn off the Water. The first step in faucet repair is to locate the hot and cold fixture shutoff valves and turn them off. …
- Remove the Faucet Handle. …
- Remove the Disc Cartridge. …
- Remove the Seals and Clean the Ports. …
- Replace the Spout O-Ring. …
- Reassemble the Faucet. …
- Restore the Water Supply.
- Turn off the water valves under the sink that supply the faucet and open the faucet to relieve water pressure.
- Unscrew the flexible supply hoses from the valves with adjustable pliers. …
- Disconnect the spray hose attachment from the faucet.
- Turn both water supply lines to the faucet OFF.
- Loosen the set screw on the faucet handle.
- Take the faucet handle off.
- Remove the retaining clip/nut.
- Pull cartridge out. ( use pliers to pull up and out)
- Drop in a brand new cartridge.
- Install the retaining clip/nut.
- Put faucet handle back on.
How do you remove a faucet assembly?
Quote from the video:
Quote from Youtube video: Use the adjustable wrench to unscrew the connections by turning them counterclockwise. Once everything is loose you can do the rest of it by hand next depending on the type of faucet you are removing.
How do you take apart a two handle faucet?
Instructions
How do you remove a kitchen faucet with U brackets?
In order to remove the u bracket you need to first remove the quick connect, this faucet had two. To detach the quick connect on the hose you simply squeeze on both sides (where the white buttons are). Pull the quick connect down off the hose and the nut and bolt on the u bracket will be exposed.
How do you remove a kitchen faucet without a basin wrench?
Use the water pump pliers to detach the kitchen faucet from the water line. Although other improvised tools might work, it is recommended you use water pump pliers instead to help avoid damage. Gently fasten the water pump pliers to the water line and pull off each line with care.
How do you remove a screwless faucet handle?
Once you find the necessary tools, you’ll need to follow these steps to remove the screwless faucet handle successfully.
How do you remove a kitchen faucet stem?
Quote from the video:
Quote from Youtube video: Now you've got a hold of your channel locks just hold onto the body of your faucet. And undo this nut. Once this nut comes loose you're going to want to back it all the way off and lift it up.
How do I fix a single handle faucet?
Instructions
How do you remove a two handle kitchen faucet?
How to Remove a Double Handled Kitchen Faucet
How do you remove a 2 handle kitchen faucet?
Quote from the video:
Quote from Youtube video: On these faucets there's a separate supply line that connects between the spout and a side sprayer. You'll need to disengage this connection before you can remove the faucet and sprayer.
How do you fix a two handle leaky faucet?
More videos on YouTube
