You actually have two options. Option one is to drill another hole or maybe find some other way to lay the new cable. Option two is to disconnect the cable, remove it, drill a wider hole in place of the existing one, then install the old cable and the new one.

How do I widen a hole without a drill?

To make a hole bigger without a drill there are various options that can be employed. You can use a mandrel (appropriate diameter) and sandpaper, a hand file, or a jab saw. It is also helpful to draw the size of the required diameter first then manually file the excess wood until the hole is the correct size.

How can I make a hole in the wall without a drill?


Need to drill a photo hook into the wall but don't have a drill bit here's a trick grab a nail that is smaller than the screw you need nail. It into the wall hard enough to make a hole.

How do you increase the size of a drilled hole?

Quote from the video:
But you can't put the larger bit in there because there's nowhere to centre it'll be really a really messy hole when you start it.

What can I use if I don’t have a drill bit?

Quote from the video:
By putting a screw in here I'm sort of an easy trick if you don't have a drill bit handy just grab a finishing nail pop it in your drill. And use it just like a drill bit.

How do you make a hole in a hole without a punch?

Quote from the video:
See just like that there is a very small hole so that's the first step now the second step is a wooden skewer so now to make the hole larger. We'll just push this with yours through that same hole.

How do you make a hole in a brick wall?

Quote from the video:
To cut a large hole in brick use a diamond coated hole saw with a masonry pilot.

How do you make a hole in a concrete wall?

Quote from the video:
Position the bed and start the drill at its lowest speed while pushing forward with steady pressure until you reach 1/4 inch depth occasionally pull out the bit and blow or vacuum out the dust.

How can I make a hole in the wall?

Quote from the video:
And using a hammer and countersink make an indentation where the hole will be if you're drilling into ceramic or glass make an X with heavy-duty tape over the surface.

Can you use a hammer instead of a drill?

The best way to drill a hole without a drill is to take a nail or an awl, and hammer it into the material. Then pull the awl or nail out of the material, and use the hole as intended.

How do you make a drill bit?

Quote from the video:
Where you take a nail. And you clip that shank. And there's a sharp little edge there that you can get a couple of good holes out of here's how it. Works.

Can cordless screwdriver be used as a drill?

You can use an electric cordless screwdriver as a drill. An electric screwdriver is more than capable of doing some simple drilling and in some circumstances may even outperform a drill.

Can I use an automatic screwdriver as a drill?

Doubtful. Nails don’t make good drill bits. An electric screwdriver is designed for use with machine screws mostly. it does not usually have enough torque to do wood screws for any length of time, if at all.

What’s the difference between a drill and an electric screwdriver?

A drill has a chuck that opens and closes around a bit, which is used for various tasks, most notably to drill holes. Electric screwdrivers have no chuck; they have a socket that can only fit driver bits. Read more here on what does a chuck size represents on a drill.

What materials are the cheapest drill bits made of?

Materials

  • Soft low-carbon steel bits are inexpensive, but do not hold an edge well and require frequent sharpening. …
  • Bits made from high-carbon steel are more durable than low-carbon steel bits due to the properties conferred by hardening and tempering the material.

What is spade bit?

A spade bit is a wood-boring drill bit that is flat with two sharp lips. The spade bit was invented by the Irwins tool company in 1968 and its design allows for it to scoop material out of a bore-hole quickly.

How can you tell if a drill bit is for concrete?

Quote from the video:
So for concrete is for concrete okay bill for example you want to install the wall plug. So you use this type of drill bits.

What is a Forstner bit?

The Forstner drill bit, named after its 19th-century creator, Benjamin Forstner, is designed to drill a flat-bottomed hole in wood. It has the same tip spur as a brad-point bit for precision drilling, but the body of the bit is designed to drill a flat-bottomed hole.

Can Forstner bits be used with a hand drill?

While each one has its advantages, the Forstner typically drills the cleanest holes. But Forstner bits can also be tricky to use in a portable (handheld) drill, as they’re better suited for use in a drill press.

Are Forstner bits worth it?

Because they’re designed to produce a minimum amount of tear-out when exiting the material, Forstner bits are the best bit for drilling through holes. Forstner bits drill a flat-bottomed hole, making them a necessary tool for many hardware installations where a precise depth of mortise is required.