Does the trap have to be directly under the drain?
It is not ideal to have the p-trap below the the exit drain because water gravity has to force the water out instead of it flowing downwards naturally. They both work and have seen it many times. But essentially anything below already creates its own p-trap- so using another is redundant.
What is a trap adapter?
Quote from the video:
Quote from Youtube video: There are three pieces to it not a furl plastic furrow and you drop it after just a matter of putting it on there tightening it up and that's it.
How do you attach a sink trap to a waste pipe?
Quote from the video:
Quote from Youtube video: Place the trap outlet over the pipe and align the outlet not to the thread then hand tighten clockwise.
How do you attach a P-trap to a tailpiece?
Quote from the video:
Quote from Youtube video: Fit in here is a tight fitting I'm just going to go ahead and put some teflon paste.
What is a trap weir?
The trap weir is the point at the bottom of the trap arm pipe where it connects to the trap. It’s the height at which water will no longer flow from the trap via gravity—the rim of the cup, so to speak (see “How Siphons Are Created,” below).
What is a running trap?
Definition of running trap
: a trap (as a U trap) in a pipe permitting liquid flow but forming a barrier against sewer gases.
What is a sink trap adapter?
PVC Threaded Trap Adapter to connect your sink drainage to the drain pipe that extends through the wall or floor. Designed to fit most tubular drain applications, this universal adapter is constructed from PVC plastic.
How do you install a trap adapter?
Quote from the video:
Quote from Youtube video: Apply it to the trap adapter and then to the drain line next thing take the cement. Apply it to the trap adapter. And to the drain. Line. Now you push as far as possible.
How do you connect a tailpiece to a sink drain?
Quote from the video:
Quote from Youtube video: But then you get your drain pipe into place tighten the top one up a little bit. See where the bottom one is kind of fitting in here get that into place type that up a little bit.
How do you attach a plastic P-trap to a metal drain pipe?
Quote from the video:
Quote from Youtube video: We'll take a nut place it over a metal pipe and then take a washer slide that plastic over the metal pipe. And then slide your s trap. Into your pipe. And then tighten that nut.
Do flexible P traps work?
P-traps take on and maintain the shape of a letter p to keep sewer gases out of your house. When you use a flexible p trap, you’re more likely to get the shape wrong, and you’re more likely to accidentally misshape it when you bump the pipe. Or when you bump it, the force might cause it to spring a leak.
What is the difference between AP trap and S trap?
The only difference between a P-trap and an S-trap is the horizontal length of pipe on the outflow side which allows you to connect the vent. You can turn an S-trap into a P-trap by adding this pipe — it should be at least 4 inches long — and connecting a vent to it.
Does every trap need a vent?
1 of the IPC establishes that traps and trapped fixtures shall be vented in accordance with one of the venting methods specified in this Chapter. Section 904.1 requires the vent system serving each building drain to have at least one vent pipe that extends to the outdoors.
How far can a trap be from a drain?
According to the International Residential Code, the maximum vertical distance between the sink drain and the entrance to the p-trap is 24 inches.
Should trap arms slope?
The minimum slope of a trap arm is easy to understand and remember. It is a 1/4” drop per running foot for pipes with a diameter of less than 3”, and 1/8” per foot for pipes larger than 3” diameter.
Can a wye be installed vertically?
Connecting a trap to a vertical drain with a wye fitting and a 45-degree elbow seems like a good idea. But it’s not. As water drains down the steep slope at the wye, it can create a siphon effect such that water will be sucked out of the trap. And the empty trap will allow sewer gas to flow into your home.
Does the P-trap need to be level?
You must install a trap level in relation to its trap seal. If the trap isn?t level, it can be susceptible to back-siphonage.
Does it matter which way the P-trap goes?
In a Shower P-Trap, Can the Lower Curvature Be Backward? When you cement it together, the straighter side of the trap- which is not as curved- should be what the 90 degree piece is glued onto. Then the curved end should be connected to the shower drain. However, gluing the P-trap shouldn’t affect the drainage.
Where do you put P traps?
Quote from the video:
Quote from Youtube video: So we're going to be talking about the p-traps above ground which are usually found underneath a sink and there are three pieces to that p-trap. We have the trap adapter the Weir and the p-trap.
What if new kitchen sink drain doesn’t line up with existing pipes?
In general, if the P-trap doesn’t line up with the drain, you can adjust the length and height of your drainpipes by cutting them or simply slipping them in and out of their fittings.
