How do you frame around water lines?
Quote from the video:
Quote from Youtube video: So I could put this mark on the floor against the wall like I can put it against the wall draw this line in a few places and use that as my Mar for my pressure-treated 2×4 which goes on the floor.
How do you finish basement walls around pipes?
Quote from the video:
Quote from Youtube video: I was trying to come up with a couple different ways that I wanted to solve this with without losing space along the floor from the walls by building the wall completely outside of those pipes.
How do you frame against a basement wall?
Quote from the video:
Quote from Youtube video: Next we will apply adhesive to the floor using a caulk gun to help secure the bottom plate. Of course let's put the board on the adhesive. Then pick it up. And put it back down on the ground lining.
How do I frame around my basement obstacles?
Quote from the video:
Quote from Youtube video: So I really wanted to sheetrock that so I had to bandit. Out. With some two by fours. Banding is basically just building out the area with some kind of lumber that clears. Whatever it is you're
How do you frame a bulkhead in the basement?
Quote from the video:
Quote from Youtube video: Really easily like slid up in here. So normally what I would typically do is I would cut two by fours to the right length.
How do you build around a pipe?
Quote from the video:
Quote from Youtube video: I like that miter on the front edge it makes the beam look like one solid b yep. All right tack it down there. Yeah. The next piece is this bottom piece right here.
How far should studs be from basement wall?
Be sure to maintain the 16-inch on-center stud spacing, and check the wall frame to make sure it’s plumb before nailing it to the beam.
What is the cheapest way to finish a basement wall?
Inexpensive Ways to Finish Basement Walls & Ceilings
- Drop Ceiling. If your basement is deep enough, you can put in an inexpensive drop ceiling to give a finished look. …
- Paneling. Paneling can be used as an inexpensive way to finish you basement walls or ceiling. …
- Paint. …
- Area Rugs.
How do you frame a concrete half wall in a basement?
Quote from the video:
Quote from Youtube video: That. Just went through the 2×4. And right through the steel. And it's never ever ever. Moving that's that in the other end. We're just going to take our air gun down there. A level on it.
How do you frame around a basement beam?
Quote from the video:
Quote from Youtube video: We threw one or two little four-inch blocks of wood in the bottom just to stiffen it up a little bit. And when the drywall works come in they'll just go ahead and hang drywall on both sides.
How do you stud a basement wall?
Quote from the video:
Quote from Youtube video: And a couple of impact nails and what this does is this drives down it's a three inch nail goes through the one-and-a-half inch plate into the concrete. And even if it isn't completely buried.
How do I hide utilities in my basement?
Quote from the video:
Quote from Youtube video: They kind of differentiate your TV room from your kid's room on the other side of the room here have cabinet doors that we use that are for hiding. Water meters and stuff like that.
How do you build a bulkhead wall?
Quote from the video:
Quote from Youtube video: First. Then right behind the pilings. And I know that's not very neat but right behind the pilings. You put your waves.
What is a bulkhead wall?
A bulkhead is a retaining wall, such as a bulkhead within a ship or a watershed retaining wall. It may also be used in mines to contain flooding.
What is soffit framing?
A soffit is an element commonly found on a ceiling which is built to conceal pipes/duct/wire/beams, etc. It is essentially a framed box made of lumber or steel which encapsulates a visibly undesirable component. A soffit will later receive finish materials like drywall or plaster.
How do I frame a basement soffit?
Quote from the video:
Quote from Youtube video: And then simply lifted them up put them in place and secured them to the joists of above. Made sure that i had these ends flush. And then nailed or screwed these in together here.
What is a soffit in a basement?
The Soffits as we call them in the biz, hide the main ceiling obstacles that protrude down from the floor joists. These obstacles generally include the main heating and cooling duct-work, main load bearing beams, main sewage lines, water lines, wires, etc..
What type of wood is used for soffits?
Standard soffit material is 3/8- or 1/2-inch-thick exterior plywood in pine (or similar softwoods) or cedar. Common, but much less durable, is Masonite or similar fiberboard soffit, as well as much more weather-resistant fiber-cement.
What can I use instead of soffit?
Soffit Material Options
- Wood. Wood is one of the oldest materials used for soffits, and like wood siding is still around today. …
- Vinyl. Vinyl soffits are another option that emerged along with vinyl siding in the 1950s. …
- Aluminum. …
- Fiber Cement.
Can I use plywood as soffit?
Finishing. Although unsanded and touch-sanded grades of plywood are often used for soffits, optimum appearance and finish performance is achieved by using panels with Medium Density Overlay (MDO), or textured (such as APA 303 Siding) or sanded A-grade faces.
