From my experience I have found that an electric bench grinder works best for this type of job. Put the hex head in a vise grip and carefully work your way up the bolt rotating the bolt as you go. I find that this allows you to be more precise with the grind.

How do you grind down bolt threads?


Quote from Youtube video: And I can do that with my grinder right here with grinding wheel on it. But you could use a bench. Grinder. So now you can see we just got almost like a 45 on the end. And we're almost done.

Can you grind threads?

Quote from the video:
Quote from Youtube video: A universal cylindrical grinder can provide the capability to grind other part features as well as produce threads. Depending on the thread size diameter pitch.

How do you sand down a bolt?

Sand down the tip of the screw (optional).

  1. If you don’t have a sander, try using heavy duty sandpaper (the kind that has material backing) on a sanding block. Run it over the screw tip a few times.
  2. If you’re sanding down multiple screws, it’s easier to use a grinder or drill with a grinding tip.


How do you grind down a nut?

A food processor is excellent for chopping nuts finely. Put nuts in bowl of a food processor and pulse for a few seconds at a time until nuts are of a fine and evenly ground. Take care not to process nuts for too long or they will become oily.

Can you grind bolts?

Grinding the threads on a bolt to make it round can be done freehand and get good results, if you are patient and you go really slow. The deepest part of the thread will be visible as little grooves, that become narrower as you grind down to the minor diameter.

Can a Dremel cut through a bolt?

A Dremel is a useful hand-held tool with several attachments used to carve, clean and cut through wood and metal. It can be safely used to cut through rusted bolts that can’t be removed otherwise.

How do you cut a bolt without a saw?

Quote from the video:
Quote from Youtube video: So the next time you need to cut the end of something off here's a quick tip put the nut on the end. Before you begin cutting then put the bolt in a vise.

How do you grind a bolt head off?

Quote from the video:
Quote from Youtube video: Off you got to angle it back into the wood a little bit. And take a chunk of that wood out that way you can get down to the threads to be able to get that bolt head off.

How do you cut a nut with a Dremel?

Quote from the video:
Quote from Youtube video: You're probably gonna have to get you a bunch of these. Cut off blades that you can get from dremel or whoever makes them wherever you can get them it's probably going to take several.

Can a coffee grinder grind nuts?

A coffee grinder can grind nuts and spices, turning whole spices like nutmeg or cumin seeds into a fine powder. While blade grinders can grind nuts and spices in smaller batches, burr grinders can turn larger quantities into fine grinds. You can also grind herbs, breadcrumbs, and parmesan cheese.

What blender can grind nuts?

Vitamix blenders seem to have the most positive reviews of all the blenders we found online. If you desire creamy nut butters and silky nut milks full of flavor, the Vitamix Professional Series 750 Blender is the way to go.

Can you grind nuts in a meat grinder?

Quote from the video:
Quote from Youtube video: The low price that cost to buy this because there's so much I can do with it we grind meat with it.

Can I use a grinder to cut a bolt?

Angle grinders are often seen as heavy-duty tools, capable of chopping through concrete, thick bolts, and rebar. However, angle grinders can also be used with finesse for polishing, sharpening, and cutting or shortening screws, nails, and other metal fasteners.

How do you cut a bolt without ruining threads?

Quote from the video:
Quote from Youtube video: And you just squeeze them tight. Cut it and after you cut it take that bolt and work it back and forth back and forth. So you can cut new threads into.

How do you cut a bolt that is too long?

Quote from the video:
Quote from Youtube video: So we use a very light pressure. And just drag it on the wheel essentially. I'm just holding it straight and turning it slowly that'll flatten out the end of the cut.

Can you cut a bolt with a Sawzall?

Reciprocating saws fitted with the correct metal cutting blade make easy work of sawing through bolts, rods, rebar, pipes, profiles, and nails in stud work.

Can you cut a bolt with a hacksaw?

Now go ahead and, using either a hacksaw or bolt cutter, cut the bolt where you want. A hacksaw is preferable, especially for larger bolts. After the bolt is cut, use a fine or medium metal file to very lightly, very gently file any excess metal off of the rim of the cut.

Can you cut a bolt with a jigsaw?

Quote from the video:
Quote from Youtube video: Now using a jigsaw might not be the best way to cut a bolt off. But it is possible.

How do you cut bolts with bolt cutters?

Quote from the video:
Quote from Youtube video: As long as you've got the correct sized bolt to go in there oddly with ease ease off and the MOT sells that you've got an awl all the way through. You then screw your bolt into the correct all.