Can a fan and light be on the same switch?

People frequently wire a ceiling fan with a light to two light switches. That way they can control the fan with one switch and the light with the other. But what if the room has only one switch and you have to wire a ceiling fan with light to one switch? You can still do it.

How do you separate a light and fan from the same switch?






Quote from Youtube video: So so we we took we put one of the conductors to the light and one to the fan. And on the other side we have the hot wire and it's connected. By this connector here to this terminal.

Can you wire a fan and light switch together?

Connecting a Light and Fan to a New Switch



Connect the white wires together in the same way, then repeat with the ground wires. When you splice ground wires, you don’t have to cap them, but it’s still a good idea to do so because the cap helps keep them together. Mount the fan and light and move to the switch box.

How do you separate two lights on the same switch?

3 Answers

  1. Get a 2-gang box to replace your existing 1-gang box.
  2. Get a new switch.
  3. Remove your existing box and install the 2-gang box in its place.
  4. Run your supply hot wire to both switches.
  5. Connect the light/fan hot wire to one switch and the exterior light to the other.
  6. Join all neutrals and ground wires.


How do you separate a bathroom fan and light switch?





Quote from the video:
Quote from Youtube video: We have a white neutral wire coming in from the switch. So this is a wiggle lever nut. And they're very easy to work with you just flip up the three levers. And pull it right off.

What is double pole switch?

What is a double pole switch? Double pole switches are connected to two separate electric circuits. They essentially contain 2 switches which are linked together and can complete the circuit either simultaneously or staggered.

How do you wire a double light switch to a fan?

Quote from the video:
Quote from Youtube video: You can attach your line wire that's the wire with the red tape on it that's the one that's hot all the time. You can attach that line where to either one of these terminals.

What is a 3 way switch?

A 3-way switch is larger than a single pole switch and has three screw terminals for wiring connections, plus a ground. Two of these take traveler wires that go from one switch to the other. For the third terminal, one switch is connected to the hot supply wire while the other switch is joined to the light.

How do you wire a dual electric fan to a toggle switch?



Quote from the video:
Quote from Youtube video: Red is gonna go to the power cable from the fan. Then the black goes straight to the basically. The black is your grounds for your toggle switch.

How do you make a single switch into a double?

Quote from the video:
Quote from Youtube video: So what i did here is put some tape on the wall i take an old work double gang. Box. And i flip it upside down and basically i want to trace the remaining. Space on the wall. So i cover the hole.

Can one switch have two lights?

You can do this light switch wiring in one of two ways. The most common is to daisy-chain the light fixtures by connecting them to each other and hooking the first one up to the switch. The other way to wire multiple lights to one switch is to connect all of them directly to the switch in a “home run” configuration.

How do you convert a one way switch to a two way?



Quote from the video:
Quote from Youtube video: Again we need two switches. And you need to check the back to ensure that they had three terminals on each if your one-way switch only has two terminals then you need to replace this.

What’s the difference between a 1 way and 2 way switch?

The one-way switch has two contacts and the two-way switch has three contacts. In a two-way switch, there are two, one-way switches combined in one. One of the terminals can be connected to either of the two, but not both at the same time.

How do I add a second light switch without wiring?

How to Add a Second Light Switch Without Wiring

  1. Unscrew the wall plate.
  2. Unscrew the existing switch.
  3. Mark the wires before you remove them.
  4. Disconnect the wires from the current switch.
  5. Connect wires to the corresponding parts of the Lutron switch.


What is the difference between a 2 way and intermediate light switch?



Summary. An Intermediate Switch can indeed be used as a One Way or Two Way switch however is far more expensive due to being a more complicated circuit, this means they are only used when necessary for circuits with three or more switches.

When would you use an intermediate switch?

An intermediate switch allows control of a single light from several locations, typically installed across three or more points in a room or building. This makes them ideal for use in stairways, landings and open plan spaces to provide a nearby switch from multiple positions.

Can I use a 2 way switch for a 1 way light?

A two way switch can be used as a one way switch or a two way switch. They are often used as both. In fact many electrical retailers (including Socket Store) don’t sell one way switches as the price difference is insignificant and the two way will do the job for both.

What does 10AX switch mean?

Short answer: Yes use an ordinary light switch which will be rated at 10A (I don’t know what your “x” means) It’s not “his x”, “10AX” is a universal descriptor of such switches. IIRC, the “X” means that the 10A rating applies to both inductive and resistive loads.

What is AX switch?



AX simply means that the switch is suitable for fluorescent/inductive loads.

What does ax stand for electrical?

Provide remote circuit breaker status information. They can be used for indications, electrical locking, relaying, etc. Common-point changeover contacts. Auxiliary switch (ON/OFF) AX indicates the position of the circuit breaker contacts.