What if new sink drain doesn’t line up with existing pipes?
Move the trap into the position you need it to be under the tailpiece by pushing it to the side. If the tailpiece will not line up with the trap, move the trap into its original position, tighten the collar with the pipe wrench and obtain a flexible tailpiece extension for your drain.
How do I extend my P-trap?
Youtube quote:So you need the proper washer insert the retention nut. And the nylon washer. And loosen up there p-trap.
Do P traps come in different sizes?
Choosing the Right P-Trap
Kitchen sink P-Traps come in 1-1/2” standard size, while bathroom sinks use P-Traps of 1-1/4” standard size. The traps also come in different material types such as propylene, ABS, brass (chrome-plated or natural), and PVC.
How do you install an offset drain for a bathroom sink?
Youtube quote:The drain pipe coming out of the wall to one and a half inch PVC pipe from the Builder. So what I have here is this is a one and a half inch. This is a flush inside coupling. So this will cement.
How do you plumb a P-trap?
Youtube quote:Off of the drain assembly pipe coming down to make it all fit so i've got it all dry fitted together i'm going to glue the abs fitting on and then we're going to simply just screw together the pieces.
How do you install a trap under a sink?
Youtube quote:Out screw on your slip nut and washer making sure to keep the beveled side of your washer face up next attach the trap bend to the trap arm using slip nuts and washers.
Can a p-trap be higher than the drain pipe?
It is not ideal to have the p-trap below the the exit drain because water gravity has to force the water out instead of it flowing downwards naturally. They both work and have seen it many times. But essentially anything below already creates its own p-trap- so using another is redundant.
How deep is a sink trap?
The trap seal depth in the P trap should be a minimum of two inches deep and a maximum of four inches – see the diagram below to know how to measure it.
How do you use a PVC trap adapter?
Youtube quote:So comes it this turns on you simply tighten the nut down. This is just a two-piece adapter as well and that's it. And that's tighten with a wrench snugs.
What can I use instead of AP trap?
Bottle traps have a horizontal waste water exit with a lower half that unscrews to allow debris and clogs to be removed. Bottle traps take up less room under the appliance than P- or S-traps, making them appropriate for tight spaces. Thes traps catch the first and debris the same way as a p-trap.
Can you offset a bathroom sink?
If you’re downsizing your existing vanity to make more room for alternative storage, offsetting the sink allows you to scoot the vanity out of the way, making more space for your new furniture without turning a simple remodel into an expensive renovation.
How do you install a p-trap adapter?
Youtube quote:I'm going to take some of the PVC glue I'm going to run it around. Inside. I'll make sure touch that lip when you're looking down inside of your adapter there's a small lip. It's kind of a stop.
What is a trap adapter for?
Trap To Drain Flexible Adapters
These trap to drain adapters are so flexible they can be used for bathroom sinks, kitchen sinks, laundry trays, bar sinks, bathtubs or utility sinks to quickly connect to drain pipes. And you won’t have to wait for any glue to dry.
How do you install a sink drain adapter?
Youtube quote:Once the PVC cement is applied to the Marvel connector and the stub out there slide the mod will connect your unsub out and twist.
How do you attach a plastic P-trap to a metal drain pipe?
Youtube quote:We'll take a nut place it over a metal pipe and then take a washer slide that plastic over the metal pipe. And then slide your s trap. Into your pipe. And then tighten that nut.
Can you connect plastic and metal pipe?
To successfully connect plastic and metal pipes, you need threaded connections. The plastic male thread must connect to the metal female thread. If you try to connect it the opposite way – a plastic female to metal male – then the connection will ultimately break or leak.
Is a metal P trap better than plastic?
The main advantage of metal drains is that metal is more resistant to heat than plastic is, even ABS plastic. That’s why metal drains are more commonly used for kitchen drains and strainers. That’s not as much of an issue with bathroom drains that don’t deal with such hot water and certainly not in the same amounts.
Can you replace metal P trap with PVC?
Purchase a PVC P-trap, pipe and fittings to replace the metal ones. Cut the PVC pipe to the lengths that you need with a hacksaw. PVC drain pipe comes in two different diameters: 1 1/4 inches and 1 1/2 inches. Make sure to buy material that’s the same diameter as the metal pipes you just removed.
How do you replace a metal P-trap in a bathroom sink?
Youtube quote:So for this project we're just going to be loosening these two nuts that hold the J Bend and then also the nut that's holding the wall tube.
Can you use PVC for sink drain?
PVC is a favored piping material among homebuilders because of its rust-proof texture and infinite durability. However, PVC is not suitable for incoming water flow — its use is limited to toilet and drain piping due to the plastic’s lack of heat tolerance.
