You need a retaining wall to retain the layers of compacted rock, but you can then place the stone right on top of that on top of a layer of sand.

What do you put under a raised patio?

Fill in the area behind the wall rock with approved materials for below your patio. Use a compactable rock or sand behind the entire wall. This provides a fill that is less likely to settle over time. Compact the entire area behind the blocks making a minimum of two passes with a walk behind plate compactor.

How do you reinforce a concrete patio?





Reinforce the concrete with 6×6-10/10 wire mesh. Put the mesh on wire supports, sold separately, so it sits roughly in the middle of the slab’s thickness. Leave a few inches of space between the mesh and the edges of the forms to prevent rust. Overlay sections by 4 inches and tie them together with wire.

How do you build a raised patio concrete?

Dig out the shape of the patio perimeter and make sure everything is level. Build retaining walls with material choice to the desired height. Fill in raised patio with dirt to proper height, then ensure everything is level. Lay flagstone or pavers, or pour your concrete for the surface.

How do you install a raised paver patio?

Quote from the video:
Quote from Youtube video: You can make a little concrete edging on there a lot of guys do that or you can buy this this will be in your paper section at your home improvement outlet.

How can I strengthen concrete without rebar?

If you’re not doing a commercial-level project but still want some additional reinforcement for your concrete, a wire mesh is a great (and cheaper) alternative to rebar. Wire mesh use is becoming much more common for projects like a home driveway.

What is better for concrete patio rebar or mesh?





Most cement slab experts say that using deformed rebar is better than using mesh, for the simple reason that deformed rebar has ribs.

How do you install a paver patio without digging?

How to Lay Pavers Without Digging

  1. Outline the area where you want the pavers installed. …
  2. Spray a grass killer, such as glyphosate, on the surface inside the outlined area. …
  3. Scrape the dead grass out of the patio area with the blade of a hoe or shovel.
  4. Build a wood frame around the patio area using 2-by-6 boards.

How high can raised patio be?

The maximum height of the raised patio area from the main garden ground level would be some 2.08 metres above which would be an iron balustrade. The raised patio area would occupy the full width of the existing property. The application site is located within Wood Lodge Lane in a predominantly residential area.

Do you need drainage for a raised patio?

If the patio is sloping to the garden then you should be able to drain it onto the lawn or flower bed. If it is sloping towards the house you will need to install drainage across the building. This can be fed into any downpipe.

How do you fix a patio drainage problem?



5 Yard Drainage Solutions You Can Do Yourself

  1. Reduce Your Watering Schedule. …
  2. Extend Your Downspout. …
  3. Dig a Creek Bed or Swale. …
  4. Construct a Rain Garden. …
  5. Install a French Drain and/or Dry Well.


Can you have a patio fall towards the house?

It is not safe for a patio to slope towards the house. Water flowing towards the house can cause problems for the foundations of the house, the basement, the crawlspace and cause potential flooding. The recommended gradient for the patio to slope away from the house is a 2% drop in elevation.

How do I stop water under my patio?



The best way to prevent patio drainage problems is to plan for them when the slab is installed. If your landscape prevents you from pitching the patio to allow for natural water runoff, your concrete contractor can install an in-slab drainage system with gravel-filled channels to carry the water away.

How do you divert water on concrete?

The best way to divert runoff water away from your driveway is to install a French drain or swale. This drain will intercept the water that runs toward your driveway and channel it downhill. With a well-constructed drain, you can stop your driveway from being flooded with runoff.

How do you overlay a patio?

HOW TO RESURFACE A CONCRETE PATIO

  1. Repair – fix cracks in concrete patio with sealer or filler.
  2. Clean – power wash and sweep away debris.
  3. Prep – grind your surface for the overlay to bond better.
  4. Mix – combine overlay components and add grit additive or coloring agents.
  5. Apply – spread overlay onto area to be refinished.

What happens when water sits on concrete?

Concrete slabs are very porous. This means standing water can easily fill in pores on the surface and eventually break down the concrete. As a result, the concrete may crack, move, or even settle.

What will ruin concrete?



What Leads to Damaged Concrete?

  • Freeze-Thaw Cycle. If your concrete floor is located outdoors, it’s exposed to the elements constantly. …
  • Fire. Fire and other sources of intense heat can damage concrete beyond repair. …
  • Improper Installation. …
  • Concrete Spalling.


Can pooling water damage concrete?

Rainwater collecting and pooling up around the foundation of a home can enter concrete because the water fills the porous concrete’s tiny holes. Over time, the water seeping into the concrete foundation will begin to break down the concrete.