How do you remove a drain flange?

If you’re removing the entire drain apparatus, including the basket (also known as the flange), insert your drain key or smart dumbbell into the opening. Turn it counterclockwise and continue turning until the drain flange is released, then remove the flange while it’s still attached to the drain key.

How do I remove the drain stopper from my assembly?





Push and Pull

  1. With the stopper in the open position, unscrew the knob from the stopper base.
  2. Push the stopper closed to reveal the center post.
  3. Use pliers or a flat-head screwdriver in the center to loosen the slotted screw inside the center post in a counterclockwise direction.
  4. Lift the stopper from the drain.


How do you replace a bathroom sink drain flange?


Quote from Youtube video: First place the plastic container under the sink and drain the p-trap. Use the channel lock pliers to loosen and unscrew the nut at the back of the trap.

How do you remove a rusted sink flange?

Quote from the video:
Quote from Youtube video: You could use a sawzall. Or an angle grinder or an oscillating tool or perhaps a dremel tool with a cutting wheel if you have these tools you've probably already thought of using them to cut the nut.

What is a drain flange?





A bathtub drain flange is the finished drain part that’s visible in the tub. Some manufacturers refer to the drain flange as a “drain body” or “drain basket”. Drain flanges come in many different finishes and have a variety of stopper options for filling the tub.

What is a sink drain flange?

What Is a Sink Flange? A sink flange connects the sink drain to a section of pipe called a tailpiece to create a tight seal. It is made of metal and sits around the edge of the drain rather like a collar, and it usually has a grid-like section covering the drain that looks like a strainer.

How do I remove a lift and turn drain stopper?

Quote from the video:
Quote from Youtube video: Well try not to loosen the the top of it. But as you rotate counterclockwise the stopper itself will loosen from its base as you'll see here.

How do you remove a stopper from a sink without a rod?

In this case, you can sometimes skip removing the stopper altogether.

  1. Place a bucket under the P-trap.
  2. Unscrew the connectors on each end of the P-trap. Use pliers if they’re tight.
  3. Pull out the P-trap and look for clogs. …
  4. Check the P-trap itself for clogs. …
  5. Reassemble the P-trap and sink stopper if applicable.



How do I disassemble a sink drain?

Quote from the video:
Quote from Youtube video: Take your pliers loosen the locknut from the bottom. That may take a minute sometimes they're a little bit rusty. Once you get that removed. You'll want to work the drain assembly. Up.

How do you replace a sink flange?

Quote from the video:
Quote from Youtube video: Now we're going to show you how to install an easy on sink flange this is a special one because if you look right here. There's little grooves. And this basically slides around those grooves.

How do you remove the flange from a sink nut?

  1. Spray bathroom cleaner on the stuck nut and wipe up with a towel or rag. …
  2. Spray the nut with penetrating lubricant. …
  3. Tap the side of the lock nut with a hammer. …
  4. Clamp a pair of locking pliers around the nut and lock into place. …
  5. Heat the nut with a plumber’s torch. …
  6. Slip a nut splitter over the lock nut.
  7. How do you remove a flange putty from a sink?



    Quote from the video:
    Quote from Youtube video: You'll simply put some pressure on a plumbing joint to break up the hardened putty. You'll easily remove much of the putty that may remain behind using your fingers.

    Is plumbers putty hard to remove?

    Removing Plumber’s Putty



    However, it’s not adhesive. Thus, it’s easy to remove from a fixture upon drying. You’ll simply put some pressure on a plumbing joint to break up the hardened putty. You’ll easily remove much of the putty that may remain behind using your fingers.

    Is plumbers putty removable?

    Plumbers use it because it remains soft for a long time and maintains a watertight seal, but unlike silicone and other types of caulk, plumber’s putty is not an adhesive, so a fixture or drain part sealed with putty remains easy to remove if you ever need to replace it.

    How do you soften old plumbers putty?

    If your putty is a few years old, it’s possible it’s dried out and is no longer malleable. Covering it with some linseed oil for a day or two will help it reconstitute.

    What can I use to soften my putty?



    Quote from the video:
    Quote from Youtube video: Like that and then just fold it into it start mashing it in. And as you do the putty will soften all the solid pieces. And there will. Break up and be reincorporated.

    How do you soften hard paint putty?

    How to Soften Painter’s Putty to Apply It to Seam Tape

    1. Open the container of painter’s putty over a sink. Pour off the water in the container, which is there to extend the shelf-life of the putty while in storage.
    2. Remove as much of the putty from the container as you need. …
    3. Knead the putty in your hands.


    Which is better silicone or plumbers putty?

    Plumber’s putty and silicone are two types of plumbing compounds that you can use to prevent leaks and create watertight seals for plumbing fixtures. Putty offers more flexibility and easier removal, but silicone caulking creates a stronger waterproof and weatherproof seal.

    How do you seal a sink flange?



    Quote from the video:
    Quote from Youtube video: Place a bead of silicone. All around that mating surface. But try not to get it on the threads at all place it down in and press firmly.

    Do you have to use plumbers putty when installing a new drain?

    Yea, don’t skip the putty, or something, on the sink parts I’m working on without the putty there is no seal. THREADS ON FITTINGS DO NOT MAKE A WATERTIGHT SEAL. Never have, never will, by virtue of you being able to screw things together, they’re not sealed tight.