How do you adjust a door latch?
Quote from the video:
Quote from Youtube video: High enough to go through the latch plate. So here I'm tapping on the shims at the bottom slowly moving the latch up. And you can see just a little jiggle the handle now the latch.
How do you fit door bolts?
Quote from the video:
Quote from Youtube video: Hold the bolt against the drill bit markets depth on the bit with a pencil. And then masking tape. This will ensure that you drill to the correct level now attach the drill bit to the drill.
How do you put a bolt on a door frame?
Quote from the video:
Quote from Youtube video: Change the drill bit to a screw head bit hold the main body of the bolt over your pilot holes and drill into position. Step four staple hold the staple against the doorframe. Level with the bolt draw.
How do you install a barrel bolt?
Quote from the video:
Quote from Youtube video: Make sure you got the right size bit. If you want to do a test run at each the wood is probably best make sure that this pilot bit is the right size for your screws. And your your hole.
How do you enlarge a strike plate on a door?
If the misalignment is only ⅛ inch or less, then try to enlarge the hole. After removing the strike plate from the door frame, use a metal file to enlarge the strike plate hole. A half-round file will match the curvature of the latch hole, making it the best choice for widening the strike plate hole.
How do you fix a gap in a door lock?
Quote from the video:
Quote from Youtube video: Making sure you maintain hinge screw thread engagement when the door clearance is too tight at the bottom lock side of the opening. Place the shims between the hinge leaf.
What is a necked door bolt?
The Necked Barrel Bolt is very well designed as the bolt needs to be twisted to be opened and not just pulled, the design of the bolt allows for more protection. It can be installed horizontally or vertically giving the product even more potential uses. most commonly used with Garden Shed doors and some cupboard doors.
What does a door bolt go into?
The bolt extends from the cylinder into a small square shaped hole—this is the “box”. It is designed to hold the bolt securely in the doorframe when the lock is engaged. The metal plate, which attaches to the frame of the door, is the strike plate.
What is a flush bolt?
Flush bolts are used to secure the inactive leaf of a pair of doors, projecting into the frame head and into a floor strike. In this application, the active leaf would typically have a lockset which latches into a strike mounted on the edge of the inactive leaf.
Are barrel bolts secure?
In today’s security conscious communities barrel bolts are one of the most common types of security device firefighters encounter on the fireground. The reason for this is simple: barrel bolts are cheap, easy to install and provide excellent security against the criminal element.
How do you install a 4 inch surface bolt?
Quote from the video:
Quote from Youtube video: Application where you're going to mount the bolt on the face of the door. And then the strike is going to hang off. Like this so that when you retract the bolt the door will swing in towards you okay.
What is an offset barrel bolt?
Available in 50mm, 75mm, 100mm and 150mm lengths and Satin Chrome, Chrome Plate, Polished Brass and Brushed Nickel finishes. Necked Barrel Bolts are also often known as offset barrel bolts or cranked barrel bolts. The offset necked barrel bolt is mainly used on internal doors where extra security is needed.
