Power line safety tips
- 1 Locate and identify hazards. …
- 2 De-energize power lines. …
- 3 Work at a safe distance. …
- 4 Wear personal protective equipment (PPE). …
- 5 Use insulated protective equipment. …
- 6 Use extreme caution around trees or when moving equipment. …
- 7 Stay away from downed power lines.
How can I work close to power lines?
Know the safe working distance for workers and equipment. Use non-conductive wood or fiberglass ladders. Wear personal protective equipment, such as rubber insulating gloves and insulating sleeves, and industrial protective helmets.
What is the minimum safe distance when working around power lines?
A safe working distance depends on the voltage of the power lines. Always maintain a distance of at least 10 feet from overhead lines and more than 10 feet if the voltage to ground is over 50 kilovolts (50,000 volts). The higher the voltage, the greater the distance that is needed between the lines and the workers.
Can you safely touch a power line?
Misconception #2: Power lines are insulated, so they’re safe to touch. This is a common misconception that many people have about power lines. Power lines are not insulated and you should always avoid contact with them. It is quite possible for people to get electrocuted if you touch power lines.
Can I cut a tree limb touching a power line?
Can you trim a tree that’s touching a power line? Unless you plan on getting electrocuted, you should NOT touch, let alone prune a tree that’s in contact with power lines! Just touching a branch that’s touching a wire can cause a fatal injury.
What is the best ladder to use when working around an electrical system?
fiberglass ladders
Use non-conductive wood or fiberglass ladders when working near power lines.
Which of the following are best safety practices associated with power lines?
Stay at least 10 feet away from overhead power lines and assume they are energized. De-energize and ground lines when working near them. Use non-conductive wood or fiberglass ladders when working near power lines. Worn cords can expose the wires within, or loosen the connections on the plug end.
How many feet are between power lines?
They are typically spaced about 125 ft (38 m) apart in urban areas, or about 300 ft (91 m) in rural areas, but distances vary widely based on terrain. Joint-use poles are usually owned by one utility, which leases space on it for other cables.
