How can I support my desk without legs?

This means all the support has to be hidden in a wall.



2 Answers

  1. mount a cleat to the walls (the third wall is omitted for clarity sake). …
  2. Create a torsion box leaving a socket around the edges to accept the cleat.
  3. mount the unit and apply a backsplash to cover the gap where the back and sides meet the wall.





How do you make a floating desk sturdy?

Quote from the video:
Quote from Youtube video: Use wood glue where the boards will meet each other. And then use two and a half inch long screws to connect them.

How do you reinforce a computer desk?

Strips of mild steel or hardwood screwed to the underside of the desk and running the entire long axis might help and be unobtrusive. As an extra step, and one that also solves your edge chips, aluminum angle trim can be glued and screwed to the edges of the desk to reduce flex.

How do you make a desk bracket?

Quote from the video:
Quote from Youtube video: I'm using a simple lamination. Process using glue and some brads. Next i'm going to pre-drill where i'm going to attach these to the tabletop.

How do you make a cantilever desk?





Quote from the video:
Quote from Youtube video: Process i ripped it roughly down the middle using a circular. Saw. This did a number of things to help me out one it cut right through the crack. Making it easier to investigate. And eliminate.

How do I secure my desk to the wall?

Lay your desktop surface on top of the brackets. You can either drive small screws through the top of the desk and into the mounting board. Or drive a small screw up through the underside of the bracket and into the desktop. I prefer the latter because you won’t have to wood putty the desk surface.

How much weight can a floating desk hold?

Technical Details

Manufacturer ‎Walnut Wood Works
Size ‎31.5 x 1.5 x 6.5
Color ‎Steel
Material ‎Steel
Maximum Weight Capacity 150 Pounds

Are Floating desks safe?

In short, a floating desk is a secure and durable product. A secure wall mounted desk provides you with a manageable and organized workspace with confidence and sophistication.

How do you attach a floating table top?



Glue and insert 1⁄2” hardwood dowels. Stepped holes. At the drill press, drill stepped holes to accept the screws that will attach the tabletop to the cross-members. Adjacent to these cross-dowels, you’ll bore an oversized stepped hole, about 3″ deep, to accept the #10 x 2″ screws that will attach the top.

How do you make a hinged desk?

Quote from the video:
Quote from Youtube video: I'd cut my one by two boards to create two 14 inch pieces. And one seventeen and a half inch. Piece. To do that I use a miter box which helps you guide to make your cuts accurately.

How do you make a wooden bracket?

Quote from the video:
Quote from Youtube video: I have some wood glue to the end of one of the pieces. And held two pieces together in an L shape to form a butt joint my drill pilot holes and added some 70 millimeter screws.

How do you make a hinged table?



Quote from the video:
Quote from Youtube video: Check that there's a pencil width gap either side before clumping it into an upright. Position with the leg held in position drill pilot holes and screw in the other side of the hinges.

How do you make a pullout table?

Quote from the video:
Quote from Youtube video: So we set about cutting out the carcass of the cupboard before routing and sanding grooves into it for shelves and gluing it. All.

How do you make hinged table legs?

Quote from the video:
Quote from Youtube video: I'm going to put the screws. Three quarters of an inch in from the end and half an inch in from each side. So I'll just use these handy marking blocks of mine.

How do you make a retractable table?

Quote from the video:
Quote from Youtube video: Let's get started. First cut your table top to 40 by 40 inches. Next rip four bottom edge boards at two inches. Cut two inch boards to length two at 40 inches and two at 36 inches.

How do you make a folding table more stable?



Uneven floor surfaces also can cause a table to become unstable. Place a shim or piece of cardboard underneath one or two of the legs to stabilize the table. A screw gun equipped with the proper tip makes for quick work when tightening fasteners. Use latex caulk, silicone or construction adhesive as a thread sealant.

How do you build a Murphy table?

Quote from the video:
Quote from Youtube video: And across the middle we're gonna put some wood glue between all those mating surfaces. And then screw those down into the frame. Right remember wood glue between the mating. Surfaces.