You can tell (roughly) where the pipes will be for that zone by finding the shortest path from the valve box that connects all the sprinklers in a zone. As long as you dig carefully, you shouldn’t have too much trouble. The pipes are usually pretty tough and are usually buried about a foot or so under the ground.

How do I find my underground sprinkler lines?

Quote from the video:
Quote from Youtube video: I know the line i want to plug travels in that direction i systematically push the rod down into the ground in the general. Area the goal is to locate the water line by hitting it with the rod.

How do you trace irrigation lines?

Quote from the video:
Quote from Youtube video: Most of our customers have told us that they should have called us first for help. We'll tell you why. Although your lawn irrigation. System may run smoothly for years. Sometimes issues may arise that

How deep are sprinkler lines buried?

In most areas, burying the pipes 8 to 12 inches below the surface is adequate. This measurement is from the top of the pipe to the surface of the soil, which means your trenches must be slightly deeper to accommodate the pipes.

Can a metal detector find sprinkler heads?

Use a metal detector to find buried sprinkler heads. Many valves have metal parts you can locate by running the metal detector over the surface of the ground. Valves are located directly under sprinkler heads.

How do I find a sprinkler head without water?

Pull a metal garden rake gently over the area of the grass where you suspect sprinkler heads are located if you cannot turn water on to the system. If the sprinkler heads are buried, you may need to apply greater pressure to the rake so it digs slightly into the soil.

How do I find an old buried sprinkler head?

How to Find Buried Sprinkler Heads

  1. Step 1: Turn on the System. Turn on your sprinkler system using its controller. …
  2. Step 2: Measure Between Two Active Heads. Measure the distance between active heads using a tape measure. …
  3. Step 3: Look for Blind Spots. …
  4. Step 4: Probe Unwatered Areas for Heads.

Where are my sprinkler heads?

Quote from the video:
Quote from Youtube video: And if we're close we'll see a sprinkler. Head there we go there's a sprinkler head uh it's buried about two and a half inches under uh the surface and that's probably not why it's coming up.

How do I find a buried sprinkler valve with a metal detector?

If your pipes are metal, the metal detector won’t tell you the location of the valve box, but it will tell you where the pipes are, so you can dig along the pipe to find the valve.

How do you dig around a sprinkler head?

Quote from the video:
Quote from Youtube video: Just using your hands you want to pull back the turf that's around the sprinkler. Head you can just pry it back and this is especially. Important if the heads been in there for a long time.

How can I raise my sprinkler heads without digging?

Quote from the video:
Quote from Youtube video: You basically can raise two heads now if your heads are sunk in extra low you can join the two caps together to raise your head approximately three inches.

Do you need a special tool to adjust sprinkler heads?

Some sprinkler heads can be adjusted using a flathead screwdriver, while others require specialized adjustment and rotor tools. A simple turn of a screwdriver or specially designed tool is typically all it takes to adjust a sprinkler head.

How do you keep grass from growing over sprinkler heads?

Quote from the video:
Quote from Youtube video: And pull it all the way up to the collar. Now good snug fit is what you want again because that's going to prevent the grass from growing between the sprinkler buddy and your irrigation head.