Just use outlet box #1 as both a junction box & outlet box. Having enough room in the box shouldn’t be a problem, but you can always get a deeper box if desired. Wire nut the supply to another 14/2 running to the switch. Then, you’ll run a new 14/2 back to outlet box #1 to power the outlet.

How do you wire 2 light switches and from 1 power source?

Quote from the video:
Quote from Youtube video: Both have pigtails flip it over now you have two ground wires pigtail on each terminal we're going to take our black hot wire coming from the power. Take our black pigtail from first switch.

Can I piggyback an outlet from another outlet?

Answer: Absolutely you can. Using 12-3 wire (for a 20 amp circuit, or 14-3 wire for a 15 amp circuit) splice the new wire to both wires on the “hot” side of the outlet and to the white wire. You may need to cut 6″ pieces of wire to go from each wire nut to the outlet. Splice the ground to the existing ground as well.

Can you daisy-chain two outlets from one outlet?

You can daisy-chain a GFI just like a regular receptacle, with one difference. The incoming wires must connect to the “line” terminals while the outgoing wires must connect to “load.”

How do you wire a switch with multiple outlets?

Connect the black and red wires to the switch. The red becomes the switched-hot. Pass the switched-hot back to all the outlets via the red wires. At each outlet except the one furthest from the switch, connect the hot side of the outlet to the switched-hot via a red pigtail.

How do you jump power from one light switch to another?

Quote from the video:
Quote from Youtube video: But i put on two pigtails. And these pigtails will allow me to provide power to the switches. So now i have a set up here where i have two pigtail wires that provide hot feeds to my switches.

How do you run power to multiple switches?

Quote from the video:
Quote from Youtube video: So you can just take some excess wire ground wire. And cut them up. So then you can use them as pigtails. And you're also going to repeat this process when we start hooking up the hot wires.

How do you piggyback electrical wires?

Quote from the video:
Quote from Youtube video: Clip off the end to make sure it's nice and straight. And make sure that my wire nuts actually going to cover the exposed copper. And then I take the wire. Nut. And I screw wire nut on.

Can you plug two outlets one outlet?

If you can fit the connections (wire nuts, push connectors etc) into existing outlet safely – yes. Use a wire gauge same or bigger as the one in the existing outlet. The only limit may be the total load on given breaker – some countries have limit how many outlets you can have on single breaker.

Can you split an electrical outlet?

A split electrical outlet is an ordinary outlet that has the brass connection tab removed between the two hot terminals. This allows the outlet to have two distinct feeds, one for the top plug-in receptacle and one for the bottom.

How do you wire a double outlet in the middle of a run?

Quote from the video:
Quote from Youtube video: Hooks on one side straight stripped on the other side the way these outlets work you've got brass screws on one side. And silver on the other. And then a green which is your ground.

How do you make two switches control one light?

Quote from the video:
Quote from Youtube video: So we connect tone or l1 of switch one with terminal l2 of switch 2. We need a place of brown sleeve at each end of this choir to warn that it is intermittently. Live.

Can you jump a hot wire from one switch to another?

Switches in Same Electrical Box



The pigtail gives you two hot wires instead of just one. Connect one wire to the first switch in the box and the second wire to the other switch, and connect the black wire from each of the lights to the other terminal on its respective switch.

How do you wire a combination switch?

Quote from the video:
Quote from Youtube video: The first installation will be wiring by common feed. So that the single pole switch. And power outlets are on the same circuit.

How do you run multiple lights and switches on one circuit?

Quote from the video:
Quote from Youtube video: Here this happens to be a multi-location digital switching system and these are called switch remotes these two right here called switch remotes. And this is your voice activated dimmer with alexa.

What does L1 l2 and COM mean?

The single direction plane switch has two L1 terminals, the terminal to which the neutral cable is connected – the blue cable (traditional black, before changing). COM or Common is the terminal to which the live core cable is connected – this is the brown cable (red era).

What wires go to L1 L2?

The yellow wire goes into the common terminal, red goes into the L1 terminal and blue goes into the L2 terminal. The grey wire goes in the common terminal, the brown wire goes in the L1 terminal and the black wire goes in the L2 terminal.

Is L1 and L2 the same as 1 way and 2 way?

Wiring a One Way Switch



The other terminal is marked as L1 and is the output to the light fixture. When you’re wiring decorative light switches such as chrome or stainless steel etc, you’ll find that the switch will also have an L2 terminal which means it’s a two way switch.

Does live wire go to common or L1?

The faceplate of a single, one-way switch has two terminals: “L1” is the terminal to which the neutral core wire is attached – the blue wire (traditionally black, before the change). “COM” or “Common” is the terminal to which the live core wire is attached – this is the brown wire (formerly red).

How do you know if its L1 or L2?

L1 (line 1) is a red wire and L2 (line 2) is a black wire. Together, they show the motor voltage. Having both an L1 and L2 indicate that the motor voltage may be 240 volts.

What are the red and black wires on a light switch?

Basic Knowledge of How to Wire a Light Switch

  • Black Wire – This is the hot or load wire.
  • White Wire – This is the neutral wire.
  • Bare Copper (Green) Wire – This is your ground wire.
  • Red Wire – This wire is used for 3 or 4 way switches and will connect the switches together so they can each control your lights.