The general rule of thumb when setting a post is that the depth of the post’s hole needs to be one-third to one-half of the actual above-ground height of the post. So, a six-foot-high finished post ideally needs to be buried three feet into the ground.
What is the fastest way to dig a fence post hole?
There’s no question about it — the fastest and easiest way to dig post holes is to use a gas-powered earth auger. Fill the tank with gas, position the auger on the ground, fire it up, hold on tight and watch the soil come streaming out of the hole.
What is the best tool for digging post holes?
You can use a post hole digger or power auger to dig the hole. A post hole digger is a manual tool and will get the job done in average soil. If you have hard, rocky soil or a lot of roots – you may want to opt for a power auger. Many home improvement stores have them available for rent.
How do you drill holes for fence posts?
Quote from the video:
Quote from Youtube video: And then pull it up. And then you get a hole you get a whole lot more that way but you can see how much dirts down in the hole still. After.
Are manual post hole diggers any good?
For most people, the choice comes down to the type of soil they have to dig. Loose soil can usually be handled easily with a manual post hole digger. This will save you the cost of hiring and fuelling a power tool, especially if you don’t have many holes to dig.
Can I dig a post hole with a shovel?
With the turf removed, a long-handled shovel does a good job of removing the dirt. Dig with the blade plumb and the handle pushed forward to keep the walls of the hole straight up and down.
How do you make a digging hole easier?
Quote from the video:
Quote from Youtube video: Mix up some epoxy slathered on the handle. And stick it into the blade hosel tap the handle on the floor to drive it home and then drill a quarter inch hole through the new handle slip.
Is a post hole digger worth it?
While that won’t make a lot of difference if you have loamy, soft soil to begin with, for those who have hard-packed clay soils it certainly does. If your soil is very solid, or has a lot of rocks, a post hole digger is an essential tool to have.
How deep should my fence posts be in the ground?
The depth of the hole should be 1/3-1/2 the post height above ground (i.e., a 6-foot tall fence would require a hole depth of at least 2 feet). Add about 6 inches of QUIKRETE All-Purpose Gravel into the bottom of the hole. Then compact and level the gravel using a post or 2×4.
Do I need a fence post digger?
Digging a posthole removes a lot of soil from the ground, and you’re going to need all of it (and probably more!) to backfill again around the new post (unless you’re using concrete or gravel). A shovel will help you get the bulk of the soil back in the hole, and a steel rake will make quick work of the rest.
Is 2 feet deep enough for fence posts?
2 feet is the minimum depth that you should dig your fence post holes for. To dig the holes one-third to one-half of the post’s aboveground height, is a general formula. The deeper you dig the holes, the more stability your fence has.
How big of a hole do you need for a 4×4 post?
12 inches
The diameter of your post hole should be three times the diameter of your post. So, if you’re planning on using a four-inch round or 4×4-inch square post, your post hole will need to be 12 inches in diameter. For a six-foot-high fence post, we would need a hole that’s 36 inches deep and 12 inches in diameter.
Should fence posts be set in concrete?
Do Fence Posts Need To Be Set in Concrete? No, fence posts don’t need to be set in concrete, and there are plenty of other ways to fix your posts if this feels a bit too permanent. If you are using wooden posts, concrete may actually be the worst option.
How long will a treated 4×4 post last in the ground?
A treated 4×4 will last 20 to 25 years in the ground if the conditions in the soil and climate are favorable. That number could increase to 40 to 75 years if you install the treated 4×4 in a cement ring rather than the soil. There are a few factors that influence how long the 4×4 can last in the ground.
Is foam good for fence posts?
Concrete provides a strong support for these products. Expanded foam has nowhere near the density or rigidity. It is plenty strong enough to hold the post up under normal circumstances, but has little structural strength.
How far should fence posts be apart?
8 to 12 feet apart
Most fence posts can be spaced 8 to 12 feet apart. While this is a general criteria, it doesn’t cover all scenarios. For instance, high tensile fence can have larger spacing, requiring line posts every 15 to 20 feet for field fence styles, and as much as 20-30 feet for high tensile barbed and smooth wire.
What size t post do I need for a 4 ft fence?
six feet long
When figuring out what size T-post to use for a four-foot fence, remember that you will drive the posts about two feet into the ground. This means you need posts that are at least 24 inches longer than how tall you want your fence. For a four-foot fence, you should use T-posts that are at least six feet long.
How many bags of cement do I need for a fence post?
4 bags
1 – 4 bags of concrete per fence post are typically what’s needed. This depends on the type of soil, fence design, height, post size and bag weight. In general the depth of the post’s hole needs to be 1/3 to 1/2 of the above ground height of the post.
