Hold it up to a light and look for any blockage. Soak in a bowl of white vinegar or CLR or Limeaway, etc. After some time soaking replace the spray piece. Also unscrew the faucet aerator and flush out any debris that may have collected in the screen.
How do you clean a diverter faucet?
Remove the sink faucet diverter valve from the hole in the faucet body with needle-nose pliers. Soak the diverter for an hour or two in vinegar to break down the mineral deposits. Using a small brush, carefully clean the area on the faucet body where the diverter sits to remove any deposits or blockages from the area.
How do you disassemble a Moen diverter?
Attach an appropriate sized deep-socket to a socket wrench, then slide the socket over the diverter valve. Use the socket wrench to turn the diverter valve’s stem assembly in a counterclockwise direction until the valve is free. Pull the diverter valve out of the wall to complete the removal.
How do you remove a Moen kitchen sink diverter?
Grasp the spout and wiggle and turn it as you gently lift it off the valve housing. When you get it off, you’ll expose the collar diverter, and you can just lift it off. Sometimes the diverter comes off with the spout, so check inside the base of the spout if you don’t see the diverter on the faucet.
How do you remove a diverter valve from a Moen faucet?
Replacing a Moen Diverter Stem
Unscrew and remove the handle, then pull out the stem extension with pliers and remove the escutcheon and the wall tube to expose the diverter bonnet. Unscrew this with a socket wrench, then pull out the diverter using needle-nose pliers.
Can you clean a diverter valve?
Replacing Diverter Parts
Parts that are worn can be replaced using basic parts from any hardware store. Visible buildup can be removed with a toothbrush or sandpaper, preferably after applying a vinegar soak to these parts. Reassemble the diverter valve and reinstall.
How do you clean a buildup on a faucet?
With Vinegar: Wrap a bag or cloth covered in vinegar around your faucet. Keep it there for several hours and wipe down the surface when you’re done. Vinegar and baking soda can also be combined to make a paste for scrubbing calcium deposits.
How do you remove the diverter on a Moen 14960?
Unscrew the Spout Cap (#2) and Remove the Spout Cap (#2). 2. Insert the Bolt into the Old Diverter (#3). Grip the Bolt with pliers, rotate to loosen the Old Diverter (#3).
How do you remove a diverter plate?
Unthread the knob from the end of the diverter button. Using a flat-blade screwdriver, hold the diverter stem in place while unthreading the diverter button. Unthread and remove the diverter button. Unthread and remove the diverter sleeve.
What type of Moen valve do I have?
If not the series number can be usually be found on the underside of the faucet or on the decorative escutcheon ring that goes around it. The second way to identify your Moen valve cartridge is to remove the old one. You will do this by first shutting off the hot and cold water feed to your shower.
How do you replace a diverter on a Moen faucet?
Quote from the video:
Quote from Youtube video: This particular one has a set screw that mounts in the front with an allen wrench some of them have a button on top that you to remove that handle. And just a basic screw.
How do you remove a Moen kitchen faucet sprayer?
The sprayer hose is connected to the diverter with a hydrolock connector and is easy to remove.
- Turn off the valves under the sink by rotating the valve handles counterclockwise.
- Hold the hose in one hand and push upward on the hydrolock connection with the other to disconnect the sprayer from the diverter.
Where is the diverter in a single handle kitchen faucet?
The diverter assembly is located in the back of the faucet body, facing away from you sink. It is a small black part that is inserted into a hole in the faucet body (Fig. 4). Using a needle nose pliers, pull out the old diverter assembly by grabbing on the “fins” of the assembly.
How do you remove a kitchen diverter valve?
Quote from the video:
Quote from Youtube video: Counterclockwise. Now pull the spout straight out. Please note the diverter is located on the back of the housing. Using needlenose pliers carefully remove the diverter by pulling the blade.
How do you unclog a faucet sprayer?
How to Unclog a Kitchen Sink Sprayer – Newer Model
- Turn the spray head counterclockwise to remove it from the hose.
- Soak the entire spray head in a bowl of vinegar for at least 1.5 hours.
- Poke the holes of the sprayer with a toothpick and rinse with warm water.
- Dry and screw the kitchen sink sprayer back onto the hose.
How do you unstick a kitchen faucet sprayer?
If you can’t get the spray button to move, put some WD-40 or other penetrating oil on the button and press the trigger several times to make it slide in and out easier. If this seems to work, turn the water valves back on and test it.
How do you clean a kitchen sprayer?
Quote from the video:
Quote from Youtube video: So one thing you can do with these is just unscrew these two so we have those separated. And then you can soak the head of this and a baggie of vinegar.
How do you fix a Moen spray head?
Grasp the rod with needle-nose pliers and move it back and forth a few times to distribute the lubricant, then spray a little more. If the lever doesn’t start retracting after a few minutes or if your sprayer has a push button, it will probably help to take the spray head apart for a deeper clean, if possible.
