How do I pair my Lutron motion sensor?
Quote from the video:
Quote from Youtube video: And one sensor. So the first step here is to click this thing and hold it for six seconds. Until you see this light start blinking.
How do you wire a light sensing switch?
Quote from the video:
Quote from Youtube video: So this will also work in a three-way switch. Application. But you don't need to use it if you're not going to use it in a three-way switch application and last but not least we've got a ground wire.
How do I reset my Lutron motion sensor?
Step 1: Quickly triple tap and hold the Test or Light button on the Sensor. DO NOT release after third tap. Step 2: Keep the button pressed after the third tap for a few seconds until the dome LED begins to flash slowly (approximately once per second). The Sensor has now been returned to Factory Default Settings.
How do you wire a 2 3 way motion sensor switch?
Quote from the video:
Quote from Youtube video: First all the white wires. Together. Next i'm going to splice. My traveler wire the black traveler wire with the red wire on the 14-3.
How do you program a Lutron Maestro motion sensor switch?
Quote from the video:
Quote from Youtube video: Period on your occupancy switch by pressing and holding this big button here now the timeout. Period is the delay. Until lights go off after the room is vacated.
How do you wire a Lutron Maestro motion sensor switch?
Quote from the video:
Quote from Youtube video: Control. Connect the ground or green wire and a bare wire from the control to the ground wire the green or bare wire in the wallbox connect. The two black wires to the two wires in the wall.
How do you connect a light sensor?
Quote from the video:
Quote from Youtube video: Part three tones on the bottom here they go into this socket arrangement here this is the wall bracket for the socket. And then just got three terms on the bottom there to connect.
How do you connect a motion sensor?
Quote from the video:
Quote from Youtube video: And the red is the wire that is going to be switched on when there's motion. So immediately you can see that the red must now go to the brown of your light so it would have been like. This.
Does a motion sensor switch need a neutral?
Picking a Motion Sensing Switch. The most important consideration is the necessity of a neutral wire. Some motion-sensing switches require that there be a neutral (white) wire attached to them, some do not—for those that do there is no substitute.
How do you wire a 3 way Lutron motion sensor?
Quote from the video:
Quote from Youtube video: There's a black black blue and a green. Okay the green. And this bare wire here in the top. And the the ground coming in the wires connect those three all together.
How do you install a 3 way Lutron switch?
Quote from the video:
Quote from Youtube video: Next identify which light switch you want to replace with the occupancy sensor. Then turn the power to that switch off at the breaker. Test the switch to make sure power is cut off before continuing.
How do you wire a Leviton motion sensor?
Quote from the video:
Quote from Youtube video: If you are installing the dos-05 or dvs-05 insert a wire connector to cap off the red and yellow wire which is only used for a 3-way connection. The device is now terminated.
How do you wire a motion sensor in series?
Quote from the video:
Quote from Youtube video: Power from the black line into the motion detector. It's sensing that there's motion the light turns on if however you're slaving them together like I am so that you can have one master.
How do you program a Leviton motion sensor switch?
Quote from the video:
Quote from Youtube video: And what you're adjusting it to so assuming you're in programming mode first thing we can do is do a single press on this top button and you'll notice that this light right here is blinking.
How do you wire a Leviton 3 way switch?
Quote from the video:
Quote from Youtube video: The green screw tighten firmly this device may also be back wired.
Which wire goes where on a 3-way switch?
Three-way wire(which includes red, black and white wires) runs from the switch on the left to the switch on the right, with the white wire carrying ground and the red and black wires carrying the output from terminals in the left switch. Normal sheathed cable runs from the right switch to the light.
What is the common wire on a 3-way switch?
Black wire: This is a hot wire that carries electricity from the power source to the first switch in a typical 3-way setup. It’s also called the “common wire” or the “line wire.” Unless the breaker is off, this black wire is always hot.
