How many amps is a double pole 60?

Compare with similar items

This item Circuit Breaker, Double Pole, 60-Amp, 240-Volt Double-Pole Circuit Breaker, 30A
Current Rating 60 amps 30.0 amps
Item Dimensions 18 x 2 x 3.3 inches 18 x 2 x 3 inches
Mounting Type Plug-In Mount Pole
Number Of Poles 2 2

What does a double pole 60 amp breaker mean?

Double-pole breakers, on the other hand, are typically rated for 20 to 60 amps and supply 240-volt power to large appliances, like electric dryers and ranges.

Can I use a 60 amp breaker for a hot tub?

Most spas will run effectively on a 50amp 2 pole main circuit breaker. Some spa manufacturers require a 60amp breaker. Although some manufacturers state their spas can use 8 guage wiring for a 50amp circuit, we recommend 6 gauge wiring on all 50/60 amp installations.

How many amps will trip a 60 amp breaker?

If it’s located on the higher side of the panel, expect a reduction of at least 5 amps in its total capacity. Don’t forget how long the electrical load lasts. The longer the load lasts, the sooner the breaker trips. Take note that it only takes 3 minutes of continuous 60-amp load to trip a 60-amp breaker.

Can you split a 2 pole breaker?

There is nothing wrong with using double pole breakers for two circuits if they are actually separate circuits, just be aware that when one circuit trips its side of the breaker the other side will trip off the circuit on it.

How many circuits can be on a 60 amp subpanel?

Modern 60-amp electrical panels are purpose-built as sub-panels and generally only have 8 to 10 slots available for circuit breakers.

How many watts can 60 amps handle?

The amount of power that each circuit can handle is the number of volts (usually 120) times the number of amps. Therefore, that 60 amp circuit can handle 7200 watts.

Does a 15 amp breaker trip at exactly 15 amps?

As you add up the electrical loads, keep in mind that a wire rated at 15 amps can carry 15 amps all day long. However, 15-amp breakers and fuses can only carry 12 amps—80 percent of their rating—on a continuous basis. Continuous basis is considered to be a circuit loaded to capacity for three hours or more.

What is a 60 amp circuit breaker used for?

The Square D by Schneider Electric Homeline 60 Amp Two-Pole Circuit Breaker is used for overload and short-circuit protection of your electrical system. This breaker is compatible with Homeline load centers and CSED devices. The ANSI-certified and UL-listed unit is rated for 120/240 VAC and 10,000 AIR.

What is a piggyback breaker?

In the space of one 1″ breaker, fits two breakers side-by-side (Twin) or over/under (Piggyback).

Are tandem circuit breakers legal?

Tandem breakers are safe and legal to use only when the panel is designed for them and only in the slots that accept tandem breakers. Look at the manufacturer’s labeling on the inside face of the panel door.

What is a double pole 15 amp breaker used for?

Double Pole Vs Single Pole Breaker
Single-pole breakers are typically used for low-power appliances, as they can provide 15 to 20 Ampereges and 120 Volts. Double-pole breakers protect heavy machines, as they can provide 20 to 60 Ampereges and 240Volts.

Are both sides of double breaker 30 amp or each of them 15 amp?

Answer: Yes, because the breaker draws 30 amps from each leg … 1 leg per each busbar. You might be better using two individual 30 amp breakers since a double breaker has a connection bar and both sides will trip if either leg trips.

How many amps is a double pole 15?


Breaker Type Double Pole Electrical Product Type
Interruption Type Standard Trip Maximum Amperage (amps)
Mounting Type Plug-On Number of Poles
Pack Size 1 Power Distribution Features
Product Weight (lb.) 0.67 Returnable

What is the difference between a single pole breaker and a double pole breaker?

A single pole breaker is typically used with 120-volt circuits, 15-20 amps. They are constructed with one hot wire and one neutral wire. A double pole breaker is primarily used with a 240-volt circuit, 20-60 amps and consists of two hot wires.

Can I use a double pole breaker as a single pole?

A double pole switch can be used to control light and a fan or 2 lights on separate circuits. It is easy to wire a double pole switch to work as a single pole switch because only one side is used instead of both.

How do you wire a double pole circuit breaker?

Steps on How to Wire a Double Pole Circuit Breaker

  1. Switch off the main breaker & test for current. …
  2. Examine the panel’s wiring. …
  3. Wire strip the circuit wires. …
  4. Connect your double pole circuit breaker. …
  5. Reassemble the breaker panel.