Can you mount a TV in thick drywall?

Even though a drywall can support a TV up to 100 lbs, the device is still brittle and the mount can require additional support, or else the TV will land on the floor. Wall studs make up the frame for the TV that supports your walls. They provide a sturdy anchor point, ensuring that both the mount and TV stay in place.

What to do if TV mount does not reach studs?





The best way to deal with this problem is to first mount a suitable piece of 3/4″ plywood on the wall such that it spans to studs where it can be securely attached. The TV mount can then be mounted to the plywood using suitable screws that go into properly sized pilot holes.

How do you mount a TV on drywall with studs?

Once you get a mount that works with your TV, check if there are studs behind your drywall. If there are, then you can screw the mount directly into the studs. Otherwise, you’ll have to use toggle bolts so the TV doesn’t fall out. Once you’re done installing the mount, you’ll be able to comfortably watch your new TV!

Can you mount a TV with only drywall anchors?

No. The strength of the anchor means nothing as drywall is not a load bearing material. Your best bet will be to span 2 or 3 studs with 3/4″ plywood on the surface and mount to that if you don’t want to get into proper mount backing by removing drywall and placing a 2×8″ or something between the studs.

Can drywall hold a 65 inch TV?

While companies do advertise plastic wall anchors that can help drywall hold significantly more weight than a standard bolt, we do not recommend using these for the kind of TV mount 65 inch televisions would require – as a 65 inch TV is most likely much heavier than even these wall anchors can handle.

How much weight can drywall hold?





Thin drywall will hold 1.2 to 1.6 pounds per square foot without some type of support. Thicker drywall will hold 1.5-2.1 pounds per square foot without additional support. Shear and tension affect the weight supported.

How many studs do you need to mount a TV?

TVs lighter than 80 pounds may be hung from a single wall stud; larger units need two studs or more.

How do you find studs in drywall?

Measure From a Corner

In all likelihood, there’s a wall stud in the corner of your room to which the drywall is attached. There may be some overlap where the drywall meets, but it’s usually pretty safe to assume that if you measure 16-inch increments in either direction from the corner, you’ll find a stud.

Will multiple drywall anchors hold more weight?



anchors on different walls can each support 50lbs, whether or not the load(s) supported is shared between the two or not. However, any holes in the drywall weaken it slightly, so while an anchor in drywall may be rated for 50lbs, putting two within a few inches of each other will decrease this rating.

What is the strongest drywall anchor?

Our top pick for the best drywall anchors is the TOGGLER Snaptoggle Drywall Anchor. Whether you need to hang a heavy mirror, wall-mount a television, install light fittings, or new shelves, the TOGGLER Snaptoggle Drywall Anchor provides a rock-solid hold for heavy-duty items.

Can you mount a 75 inch TV on drywall?

Mount the TV without drilling to walls made of drywall, plasterboard, wallboard, sheet rock, gypsum board, or gypsum panel. Connection to the wall is made with 16 nails and 4 drywall arrow anchors.

Mounting Type Wall Mount
TV Size 75 Inches
Color Black
Minimum Compatible Size 29 Inches
Compatible Devices Televisions

Can TV fall off wall mount?



There is a chance that even with a good quality TV mount and fixings correctly secured that the TV could fall off the wall by it not being installed properly. This is usually done by someone that does not have the skill-set to mount TV’s to walls, this could be a rogue trader or “Cowboy” as they are often known.

Is there a weight limit for mounting TV on wall?

A good rule of thumb is 80 pounds for a single stud, but a specific mount’s specifications should always be followed. Everything below 60 inches is 80 pounds.