How do you program a Rain Bird controller?
Quote from Youtube video: Turn the dial to runtimes. And press program select to choose the desired. Program press the left or right arrow buttons to select a station.
What is an indexing valve irrigation?
Indexing valves allow an irrigation system to change zones. Easy to install and maintain, K-Rain’s patented hydraulic actuated indexing valve changes zones when the water flow is interrupted. These valves are ideal on pump applications, on site waste water disposal and reclaimed water systems.
How do I set up Rain Bird?
Launch the Rain Bird app and press the Add Controller button. Follow app prompts to set up WiFi connection to Rain Bird controller. Share access to the controller as needed. Program and test controller by turning on watering at the timer and through the Rain Bird app.
How do you set a Rain Bird water timer?
Quote from the video:
Quote from Youtube video: Hit the next advanced button up or down we'll change that you're done there. So once you're done with that you set your watering start time this timer currently has a 4 o'clock.
How do you program an irrigation controller?
Quote from the video:
Quote from Youtube video: This will total twelve complete cycles or 60. Minutes per week and that's the basic programming to have a weekly watering schedule. Remember that all the zones run one after the other.
What does cyclic mean on Rain Bird?
The “Cyclic” setting gives the option of choosing how many days to skip between each watering cycle. Press the “Manual Start/Advance” key to navigate among the options. Leave the chosen water cycle setting on the screen and turn the dial to “Auto” to save the settings and begin watering according to the new program.
Why does my sprinkler system skip a zone?
If the pump is located more than a few feet from the water source, the inside valve disc pops up and down, skipping zones as the supply line fills with purging air.
How does Fimco Hydro indexing valve work?
The Hydro-Indexing Valve is activated by sufficient water supply being turned on and off therefore no electrical wiring is required to the valve. All that is needed for a totally automatic system is a controller to turn on and off the water supply (pump or solenoid).
How do you change a Fimco indexing valve?
Directions on how to replace your Fimco Stem and Disc Assembly: Loosen the coupling nut from the coupling. Unscrew the 6 or 8 screws around the perimeter of the valve. Remove off valve top Work the stem & disk assembly up into and out of the valve top until it disengages. Insert the new stem…
How do I reset my Rain Bird controller?
Resetting a Rain Bird ESP-Me is easy. To reset the irrigation controller, all you need to do is turn the dial to ‘Seasonal Adjust’ then hold the left and right buttons down until the LCD display says ‘CLEARED’ then your ESP-Me irrigation controller has been reset.
How do you aim a Rain Bird sprinkler head?
Quote from the video:
Quote from Youtube video: Direction clockwise to increase the arc. And counterclockwise to decrease. It rotary sprinkler heads as well as all of your other irrigation.
How do you set a sprinkler schedule?
Sprinklers should be set to run for about 30 to 35 minutes at a time twice a week. Your goal is at least 1″ of water a week for your lawn. When it’s hot and dry, double the water times while still trying to water just 2 or 3 days a week.
How do I set my automatic sprinkler system?
If you have an automatic system, you can set two start times that run back to back in the early morning. For example, your first start time is at 3:00 and it takes 1.5 hours to run through all of your zones and deliver that . 25” of water. Then set a second start time at 4:45 (so they don’t overlap).
How long should you run each sprinkler zone?
We suggest watering spray zones 30 min per zone, 3 times per week. Run this schedule for one week only. After one week, water plantings only 2-3 times per week for about 10-15 minutes per spray zone, and 30-60 minutes for drip zones. 2.
How long should I run my Rainbird sprinkler system?
Keep It Balanced. Put measuring cups in various places around your lawn and run the sprinklers for 15 minutes. This will give you an idea of how much water the grass is getting and where.
How many gallons per minute does a Rain Bird Sprinkler use?
WE UPPED THE PRESSURE AND COMPARED FLOW RATES
However, the flow rate of the Rain Bird PRS spray held steady at 2.1 gallons per minute, saving almost a gallon per minute over the non-PRS spray.
How much water does my Rain Bird Sprinkler put out?
Generally, spray heads use about 0.75 gpm for ¼-circle, 1.5 gpm for ½ circle, and 3.0 gpm for full-circle heads. “Rotor” style heads use 2 to 5 gpm each, for most residential applications.
How much water does a Rain Bird need?
As a rule of thumb, water 1-2 days a week during cooler weather, 2-3 days a week in mild weather and 3-4 days a week in hot weather.
What psi should I blowout my sprinklers?
50 PSI
The minimum volume an air compressor must be able to provide to properly blowout an irrigation system is 20 cubic feet per meter (CFM). Still, many professionals recommend up to 50 CFM at under 50 PSI for optimal performance, assuming the water lines are less than an inch in diameter.
How long should I let my drip system run?
When a drip system is installed, it should be designed so it has the flexibility to change the amount of emitters and the location of the emitters in the landscape. Each emitter should give you at least a 30-minute run time without runoff.
