How do you protect a fireplace mantel from heat?

A mantle heat shield can be used to protect mantles from excessive heat and be used to protect TV’s and sound bars from heat damage. Mantle heat shield can be used to protect fireplace mantles from excessive heat and damage. They may also be used to shield TV’s and sound bars located above a fireplace.

How do I make my gas fireplace less heat?





In the winter, switch your ceiling fan to run clockwise.



This will redistribute the rising head through the room, allowing you to burn the fire lower and set the furnace to a cooler temperature. Combining a gas fireplace with a ceiling fan is one of the most cost-effective, energy-efficient ways to stay warm.

How hot should a fireplace mantel get?

Average room temperature is 70-75°F; therefore a 187-192°F surface temperature can be expected. On a solid surface, 150°F is very hot to the touch (to put this in perspective, water boils at 212°F and the average bath water temperature is 110°F).

Can you put a mantle above a gas fireplace?

Installing a fireplace mantle without adequate clearance from the fireplace opening could be a serious fire hazard and it may lead to damage and injury. Most fireplaces radiate heat out of the front of the firebox, because of this, your mantel needs to be placed a safe distance away from the firebox.

How do you redirect heat from a fireplace?

Draw heat from the fireplace to another room in the home, up to 20 feet away. When a Heat-Zone kit is run continuously, it can redirect up to 25% of the heat to another area, also reducing wall temperatures above the fireplace. Two Heat-Zones run continuously will redirect up to 50% of the total heat output.

Do fireplace heat reflectors really work?





Using a heat reflector will reduce the amount of heat reaching the back wall of a fireplace by as much as one-third, which can mean less damage over time. And, fewer repairs as well, which can be very costly. Fireplace heat reflectors will also increase the amount of heat entering the room by as much as 42 percent.

Why is my gas fireplace hot?

When your pilot light remains on, a small amount of heat is generated. The glass doors on your gas fireplace remain warm to the touch. When the weather is hot outside, it makes sense to eliminate any additional heat sources inside the home, especially if you are running air conditioning inside the house.

Can a gas fireplace get too hot?

The Maximum allowable surface temperature is 117° F OVER ambient (room) temperature. Thus, if a room is 70° – 80° the exposed combustible surfaces immediately surrounding the Fireplace can have a surface temperature as high as 187° F. – 197° F. (Too hot to touch) and still be safe.

Do gas fireplaces have dampers?

Traditional wood or gas fireplaces have one of two types of dampers. Throat dampers are installed at the base of the chimney, over the firebox — the main chamber where the fire burns. They’re usually opened by a handle, a crank or a chain located inside the fireplace.

How close can mantle be to gas fireplace?



The National Fire Code dictates that any combustible material (e.g., wood mantel or similar trim) must be at least six inches from the firebox opening. An additional inch of clearance is needed for every 1/8 inch the combustible material or trim protrudes.

How high should a mantel be above a gas fireplace?

Again, “proper” height is relatively subjective to your fireplace, but average or standard fireplace mantel height construction is around 54” above the hearth’s floor. Your fireplace may fit this dimension or it might be on the shorter or taller end of the spectrum when it comes to mantel height above fireplace.

How far should a mantle stick out?

A mantel should stick out at least 6 inches (15.24cm) from the wall. It’s the perfect depth that allows you to have a mantle effectively deflect heat without compromising aesthetics. You can extend it to have more depth for your decorative pieces, but we don’t recommend having it less than 6 inches (15.24cm).

How do I cool down my fireplace?



The quickest way to cool a fire is to douse it with water, but this isn’t recommended. Instead, spread out the logs and embers in your fireplace as far as you can so they cool more quickly. Oxygen is the third combustion requirement and potentially the easiest one to control.

How do you seal a fireplace mantel?

Prime the wood with either a clear or white primer. Apply the specific stain or color of paint you desire. Minwax Sanding Sealer is a good sealer to apply after a stain or color, though it will be quite slick looking. Seal whichever sealer you use with a coat of Minwax Polyurethane to ensure the mantel is protected.

Does a fireplace need a heat shield?

It’s not uncommon for the back wall of a masonry firebox to develop cracks in the bricks and missing mortar joints. These should be repaired when this occurs. After the repair, we recommend installing a heat shield to extend the life of the repair to the back wall.

How do you make a heat shield?

Quote from the video:
Quote from Youtube video: There's many ways to do this a simple one is using tin snips which are basically high strength scissors. These work well but take some patience. Also they're not great for tight vents.

Are wooden mantels safe?



Warning: Risk of fire and/or smoke damage may occur as a result of fireplaces and mantels installed without adequate fire-hazard clearances and may lead to asphyxiation, injury and/or death.

How close can wood mantle be to gas fireplace?

6 inches

The National Fire Code requires all combustible material to be at least 6 inches from the opening of the firebox.

Do you need a mantel for a gas fireplace?

A freestanding natural gas fireplace looks like a traditional fireplace, complete with a mantel. A range of wood styles is available. Gas log sets offer a more realistic wood-fire look. Gas fireplaces can be turned on with a simple switch or even a remote control.

Can you put wood around a gas fireplace?



They can be set to display realistic flames with no heat or adjusted to add warmth to the room with radiant doors and fans. At either setting, the heat is not intense enough to pose a fire danger, so you can safely install wood trim around a gas-powered fireplace.

How high should a mantel be above a gas fireplace?

Mantel Height: We recommend installing the mantel 4.5′ from the floor. This allows room for stockings during the holidays. Most housing codes and the National Fire Protection Agency (NFPA) state that the bottom of the mantel must be at least 12” away from the top of the fireplace box.

What can I put around my gas fireplace?

Gas fireplaces will not damage flooring or other materials that are in close proximity, like a wood-burning fireplace would. The surround, the 3- or 4-inch material surrounding the face of your fireplace, can make a subtle and refined statement. It’s generally marble, granite or another stone that reflects heat well.