To deactivate a currently running program on your White-Rodgers thermostat,

  1. Press HOLD to stop the program.
  2. Use the arrow keys to adjust the temperature to the level you want.

How do I turn off a program on my thermostat?

To completely bypass all programming, simply press the HOLD button once. HOLD will appear in the display. For as long as HOLD appears in the display the thermostat will not change the set-point temperature unless you adjust it yourself with the up or down arrow buttons.

How do I change the settings on my White Rodgers thermostat?





Line Voltage Digital White Rodgers Thermostats

  1. Press and hold the Up and/or Down arrow and press the light button for a few seconds.
  2. The display will initially go blank and then reappear.
  3. The configuration settings are now reset.


What does program mean on thermostat?


Quote from Youtube video: On your model you may be able to program. Individual days of the week other models allow you to program separately for weekends and weekdays. When setting up your thermostat.

Is there a reset button on a White Rodgers thermostat?

Generally, you’ll need to open the thermostat cover and detach the wires from terminals R and C. Next, remove the batteries for a couple minutes and then replace them. Program your thermostat to the ambient temperature. If you hear one click, your thermostat has been reset.

What is hold on White-Rodgers thermostat?





By pressing “Hold”, your thermostat will lock in the temperature it’s currently at until you change it again. When you are ready for your normal schedule to resume, simply press the “Run” button and return to your typical programming.

How do I turn off the schedule on my Emerson thermostat?

Use▲and ▼buttons to navigate to Settings. Press Menu to Enter. Use Next and Back to navigate to the screen that has “06” displayed in the top right corner. Use ▲and ▼buttons to select between 1 to 12, or set it to OFF to turn off reminder.

How do you unlock a White-Rodgers thermostat?

  1. Press the up and down arrow buttons simultaneously. …
  2. Push the “System” button on the thermostat when the correct code is entered to unlock the thermostat.
  3. Reset the keypad lockout code if you do not know it or remember it by pressing the up and down arrow buttons simultaneously until the “0” appears on the LCD screen.
  4. What does lockout mode mean?

    Modern day high efficiency furnaces monitor a variety of conditions before, during and after the combustion process. If the furnace is unable to achieve ignition for a call for heat, or if an unsafe condition is detected, the furnace will enter what is called “lockout mode.”

    How do you get your furnace out of lockout mode?

    Regardless of the culprit, you will have to perform a reset procedure to get your furnace out of lockout. Most modern gas furnaces can be reset by turning off the power, waiting around 20 seconds, then switching the power back on. Other furnace models may exit lockout after 1-2 hours and attempt to power on again.

    What does 1 hour lockout mean on furnace?



    The furnace controller monitors these sensors constantly. If one of the sensors reports an unsafe condition, the furnace controller shuts off fuel and power to prevent unsafe operation. This condition is known as lockout. Your furnace will normally remain in the locked-out state until you manually reset it.

    Why does my furnace keep going to lockout?

    Regarding furnace lockouts, if the internal temperature of the heat exchanger is too high, the switch closes. In other words, it will force your furnace to go into lockout mode. To maintain temperature, the heat exchanger needs adequate airflow. So, you’ll need to clean or replace dirty air filters.

    How do I reset my day and night furnace?

    How Do You Reset a Furnace? The Ultimate Guide

    1. Find the switch mounted on or near the furnace and turn the power off. …
    2. Wait about 10 seconds.
    3. Turn the switch or breaker back on and check the furnace to see that it has power again.



    How many times can I hit the reset button on my furnace?

    Don’t hit “reset” more than twice. The process pumps oil into the burner chamber, where it can accumulate if you have no ignition. Then when the furnace finally does start, it can do so explosively. So if the button won’t reset, or quickly pops up again, it’s time to call a professional repair service.