How do you remove PVC pipe from pool pump?
Quote from the video:
Quote from Youtube video: So you want to just slowly heat up the fitting. And you want to just keep going back and forth. And eventually this thing will be warmed up enough so we're going to slide it right off the valve.
How do you use a PVC repair coupling?
You have to slide the coupling (dry) all the way on one pipe, apply a heavy coat of solvent to the two pipe ends, and quickly slide the coupling to its final position in one smooth motion, preferably with a 1/4 turn rotation to help spread the solvent.
What is a PVC slip coupling?
The PVC slip coupling is a fitting that allows up to two inches of PVC pipe to be removed and repaired using one fitting. Slip couplings, also called repair couplings, are the most efficient way to repair a burst pipe or leak.
How do you install a PVC compression coupling?
Quote from the video:
Quote from Youtube video: Or gasket the final component of the compression coupling is the sleeve. We're now going to Center the sleeve over the area where the repair is and then simply tighten the compression.
How do you install a 3 inch PVC coupling?
Quote from the video:
Quote from Youtube video: So let's place the branch on the pipe where we want it mark that including the depth of socket. This pipe will be inserted into the end of the branch.
How do you connect PVC pipe coupling?
Apply a small amount of PVC cement to the inside of the PVC pipe. Do not apply any PVC cement to the end of the coupling or dome cap. Insert the coupling or cap into the pipe. Use a mallet or piece of wood to tap the cap or coupling into place, if it will not insert fully by hand.
How do you remove a compression coupling?
You usually have to cut it off.
- Shut off the water to the pipe from which you are going to remove the compression fitting.
- Hold the male end of the fitting steady with a pair of adjustable pliers. …
- Turn the compression nut counterclockwise relative to the male part of the fitting with another pair of adjustable pliers.
