1/2″less than 1/2″ gap. Any gap larger than this removes the support you’ll provide later.

How do you frame a drywall ceiling?

Quote from the video:
Quote from Youtube video: So much for for hanging drywall you absolutely have to have a drywall screw gun. We're actually going to start on this section of the ceiling. And go this way. We got a 10 foot sheet.

What is the maximum support spacing for ½ gypsum on walls or ceilings?

Support spacing for gypsum or metal lath on walls or ceilings shall not exceed 16 inches (406 mm) for 3/8-inch-thick (9.5 mm) or 24 inches (610 mm) for 1/2-inch-thick (12.7 mm) plain gypsum lath.

What is the spacing of the edge nailing on the ceiling gypsum panel board?

Space nails maximum of 7″ apart on ceilings, 8″ on walls and at least 3/8″ from ends and edges of panels. Seat nail so head is in a shallow dimple formed by last blow of drywall hammer. For 1/4″, 3/8″ and 1/2″ thick panels, use 1-1/4″ wallboard nails.

What are the measurements for gypsum board?

The standard sheet size for drywall is 4′ x 8′. However, the 1/2” and 5/8” thicknesses, though remaining at a width of 4′, are also available in lengths of 9, 10, 12 14, and 16 feet. Of course, custom sizes are also available.

How do you frame an interior ceiling?

Quote from the video:
Quote from Youtube video: And we're going to go all the way along the perimeter of the room using the 3v2. And then in between the three two we're going to put schools across so the laser level is perfectly level though.

How far apart should furring strips be for drywall?

If drywall is to be installed on the ceiling, place the furring strips every 16 inches on center. When laying out the furring strip plan, remember that the strips will run perpendicular to the joists.

How far can you SPAN 1/2 drywall on ceiling?

What is the maximum joist spacing for ceiling drywall? Does it matter if the panels are oriented parallel or perpendicular to the joists? 1/2- or 5/8-inch drywall is 24 inches on-center. Ceiling drywall should always be installed perpendicular to the joists, even when they are 16 inches on-center.

Can you use 1/2 inch drywall ceiling?

1/2-Inch-Thick Drywall



Half-inch drywall panels are the standard thickness for interior walls, as well as ceilings. These panels are easy to carry and hang.

How far apart should ceiling joists be?

16 to 24 inches

Just like the studs, the standard spacing between joists is 16 to 24 inches.

Do ceilings have to be 5/8 drywall?

5/8″ Type X is most commonly used for ceilings due not only for its rigidity (no sagging), but also its fire-resistance and acoustical blocking. You’ll certainly want to use at least 2-inch drywall screws to hang it. Not sure adhesive is necessary or recommended unless you are covering existing drywall.

How long should drywall screws be for ceiling?

Less common — 1-5/8”: To prevent sags, thicker drywall measuring 5/8” is used on ceilings. To secure that added weight, use #6 screws measuring 1-5/8” to allow 1-inch penetration into the wood.

Should I hang drywall vertically or horizontally?

On commercial jobs, fire codes often require seams to fall on the entire length of the framing, so the drywall must be hung vertically. However, on residential jobs, the drywall on the walls is typically hung horizontally. For walls 9 feet high or shorter, hanging the drywall horizontally has a number of benefits.

How many screws go into a 4×8 sheet of drywall?

Use about 32 drywall screws per sheet of 4-foot by 8-foot drywall installed horizontally on a wall. This total is comprised of four screws on the five middle studs and six screws on each of the two sides.

Do drywall edges need to be on studs?

All edges of all sheets of drywall must land on a solid surface such as a stud. A hanging drywall edge may work in the short-term, but in the long-term it can result in cracks and other serious wall issues. Sometimes, the drywall does not horizontally reach a stud.

Does it matter if you drywall ceiling or walls first?

Hang drywall on the ceiling first, then the walls. Check the ceiling for bowed joists using a 4-ft. level. Irregularities less than 1/8 in.

Should you stagger drywall joints on ceiling?

It’s not necessary to stagger seams on ceiling drywall. However, because these joints are relatively difficult to finish – and tend to be noticeable in the finished product – it’s a good idea to stagger the drywall panels to make the joints less visible.

Should I use nails or screws for drywall?

Drywall nails are better and easier for the DIYer. Screws are a pain and do not grab as much surface area as nails. Nails, when driven in drywall are countersunk slightly and give a much larger area for drywall. Screws are the cheap way for pros to go and they will always take the cheap over the better.

What size drywall should be used on ceilings?

5/8-inch thick drywall is the best drywall thickness for ceilings. Although you can use any type of drywall for ceilings as long as its installed correctly (even ultralight 1/4-inch thick drywall), a thicker panel is best. 5/8-inch thick drywall is the sturdiest which prevents sagging between ceiling joists.

Can you use 3/8 drywall ceiling?

You can use 3/8 drywall to repair or cover a bowed surface and walls with patches. However, for optimal results, use the recommended ½ inch drywall ceiling because 3/8 inch thick drywall boards are more fragile compared to the ½ inch thick ones.

Where can I use 1/4 inch drywall?

Quarter-inch drywall is often used to cover damaged plaster walls and also for curved areas because it bends easier than thicker drywall. Then the 1/4-inch-thick drywall can be double layered to get to the conventional 1/2 inch thickness to match the rest of the wall.