As a general rule, 19mm thick sheets of plywood are the sweet spot for desk building. At this thickness you have the required strength to keep your desk strong in most circumstances and not have to worry about warping.

Is 3/4 inch plywood strong enough for a desk?

I built a hardwood 3/4 ply desk not to long ago and edge banded it with solid birch. It also had plywood base that the legs were attached to and the desktop rests on. It is plenty strong.

How thick should a wooden desk top be?





18mm solid wood



Whilst the density of the oak or pine does not change with thickness, generally when making furniture the size of each individual piece is smaller, so the inherent strength is greater. 18mm thick wood is perfect for smaller desk tops, around 1200Lx800D when the project has limited budget.

How thick should a desk top be?

1″ to 1 ¾”

Transitional styles vary greatly, but typically favor table top thicknesses in the mid-range, from 1″ to 1 ¾”. Not excessively thick or thin, but well-proportioned to the interior space. Larger, more rustic pieces may work well with a thicker top.

How thick should floating desk be?

However, for a floating desk, 18” deep is more common, as the greater the cantilever of the desk, the more stress it puts on the mounting, increasing the chances of the desk breaking and falling off the wall, if it is not properly made or if too much weight is put on it.

What kind of wood should I use for a floating desk?





Measure the top of the desk and cut the oak plywood. Place the plywood down on top of the floating frame. Secure around the top using brad nails. Attach the front trim 1 x 3 using brad nails.

What is a Murphy desk?

‘ Not everyone has an extra room in their home that can be used as an office, but thankfully there’s a great solution: The Murphy Desk! A Murphy Desk is a pull-down or fold-down desk that can be folded away when not in use.

How do you build a desk against a wall?

Quote from the video:
Quote from Youtube video: And ratchet them in far enough that just the tip is hanging out on the back edge that way when we put it up against the wall it will catch in your holes. And make it a little bit easier theoretically.

What is a floating desk?

There is a unique type of furniture that you can purchase for your home that is called a floating desk. It does not actually float, as the name would indicate, but is simply mounted on your wall so that you can drop down the desk and use it any time that you want.

What brackets to use for floating desk?



Yuri XD is designed to be used as Floating Desk Bracket, but can also be used to support a heavy duty shelf slabs, countertops, hollow slabs, beams and apron construction surfaces.

How do you hang a heavy desk on the wall?

Quote from the video:
Quote from Youtube video: Back similar to life liberally apply wood glue on each side of the angled support piece and then lay it down clamp it and we're going to attach it with the one inch screws.

How high should you mount a desk?

The standard desk height when standing is around 44”. However, there’s an easy way to figure out how tall your desk should be. Just stand up straight and measure the distance between the floor and the bottom of your elbow. That’s where the desk should be.

How do you bolt a desk to the wall?



Quote from the video:
Quote from Youtube video: For your power cord to exit from behind the desk I drilled a few holes underneath the desk to route the power cable over to the wireless charger. And then held that in place using a piece of scrap.

How do you anchor a desk to the floor?

Drill into the concrete at the marks using a masonry bit. Pound the inserts into the holes. Place the table over the holes, fitting the ends of the wedge anchors into the inserts. Pound or apply weight to the table top to force the wedges into the anchors, where they will lock in place to secure the table.

How do you anchor furniture without studs?

The good news is that it’s not important to locate studs to secure the furniture. The brackets can be attached to the wall by using one of a number of wall anchors. Our choice would be to use an metal expandable wall anchor. It’s the stoutest and easiest to use.

How do you anchor furniture without screws?

You can use plastic ties, steel cables, or Velcro straps to accomplish. Please note, you may have to drill or glue hardware to the back of the furniture. Be aware this method may not be sufficient for holding up furniture to the wall in the event of jostling, a natural disaster, or if the furniture is top-heavy.