How to run cable between floors?
Quote from the video:
Quote from Youtube video: So you can run quite a good length if you start cascading one after another on these fiberglass rods and I taped on the first piece I taped the cable onto the end. I got some electric tape.
How do I run an Ethernet cable in a two story house?
Quote from the video:
Quote from Youtube video: Below. In each room I have to cut a hole on the wall with this drywall knife. And I'll have to do one additional hole to be able to access the lower floor and I'll do that by drilling.
How do you run coax cable through walls?
Quote from the video:
Quote from Youtube video: And I'll show you a little bit more what I mean in just a second I can attach the cable to the top of the drill bit and pull it right down through.
How do you run coaxial cable outside?
Quote from the video:
Quote from Youtube video: You can run the cable underneath the flashing. And down into the home next to an existing bent pipe just make sure you seal everything up good so you don't create any leaks.
How do you run ethernet cable between floors without drilling?
Quote from the video:
Quote from Youtube video: So what you have to do is you have to run cat5 cable so all i did was i just took the cover off the box and i've just got one you can see one cat 5 cable running into the nbn.
How do you run electrical wiring in a house?
Quote from the video:
Quote from Youtube video: And we can run wires wherever we need to we need four things we need outlets to plug stuff in we need to light this room up we need to control the lights with some sort of a switch.
How do I connect an upstairs Ethernet cable to downstairs?
Quote from the video:
Quote from Youtube video: Into a computer you can plug it into a computer or in my case you can plug it into a network switch. So you can have more ports in the upstairs or the other end where you don't have internet.
How do I get Internet access from upstairs to downstairs?
Ethernet Cable
Sometimes the easiest solution is to run a wire between your upstairs and downstairs. Ethernet cables can connect a single device with wired Internet access. For additional devices, you could use an Ethernet switch upstairs.
How do I pull an Ethernet cable in my house?
Quote from the video:
Quote from Youtube video: Now simply drill the holes for the anchors. Start small then get a little larger. You want the anchors to be snug in the drywall. Use your hammer to tap it in.
How do I run coaxial cable in my house?
Quote from the video:
Quote from Youtube video: So when it comes to coaxial or coax cable what i always buy is what's called rg6 cable so you can get rg6 cable in either dual shield tri shield or quad shield the more shielding the more expensive.
How do you wire a house for cables?
Quote from the video:
Quote from Youtube video: Our standard when we wire a home we use two cat six to coax. And some kind of a low voltage power wire like an 18 2 or a 16 to quick fun fact if you're a nerd like me the demarcation.
How do you drill an outside wall for cable?
Drilling the hole
You can use a 3/8″ installer bit, which is ~20″ long and has a hole on the end to aid in pulling the cable. Drill through the wall with the installer bit. Remove the bit from the drill (leaving it in the hole). Go outside and (or have a helper) connect the cable to the end of the installer bit.
How do I run CAT 6 cable in my house?
Quote from the video:
Quote from Youtube video: First you'll need some cat6 wire or catch 5e cat5e is cheaper i recommend getting 500. Feet you also need some rj45 connectors. And some boots for the wires.
