What do I do with the extra red wire in my ceiling fan?
A red wire up in the ceiling fan junction box usually indicates that the wiring has been installed which provides separate switch for the light and a separate switch for the fan motor. If your ceiling fan does not have a light fixture, then simply cap off the red wire and attach the fan motor to the black wire.
How do you run an extra wire on a ceiling fan?
Quote from the video:
Quote from Youtube video: No I did it already need a wire lockdown nut for that here this is 14 gauge wire this is 14 2 which means it's got three wires in it one of them is ground went to neutral and ones hot wire.
How do you wire a 4 wire ceiling fan?
Quote from the video:
Quote from Youtube video: To do this the wire from your wall circuit to your light has to have four wires connect the green to the ground wire. Then wipe two white. The blue fan wire to the red ceiling wire.
Can I connect red and black wires together ceiling fan?
Connect the red wire in the ceiling to the black wire in the light kit and the black wire in the ceiling to the black wire in the fan. Tuck the wires back into the box. Turn the power back on and test the fan.
Can you connect the red and black wire together?
These wires are typically used for switch wiring as well as the interconnection between smoke detectors hard-wired into the power system. You can link two red wires together, or you can link a red wire to a black wire. Since red wires conduct current, they are considered hot.
Why do I have a black white and red wire?
Black, red, white with black or red tape will always indicate a hot wire. The term “hot” means these wires carry a live current from your electric panel to the destination.
Can I connect blue and black wires together?
If you only have one switch, connect the black and blue wires. The black and blue wires need to be connected. You will be able to control your fan and lights with a single switch.
What does the blue wire go to on a ceiling fan?
The blue wire on a ceiling fan is to control the power running to the light kit. The black wire is usually reserved for fan power only and does not extend over to your light kit. Without connecting the blue wire on your ceiling fan to a power source, you will not be able to control your lights.
Why are there 2 black and 2 white wires in ceiling box?
So, why are there two black and two white wires in your outlet box? There are two black and two white wires in an outlet box because the outlet is in the middle of a series circuit, accepting power from another source and sending it on. Two cables are hot wires, bringing the power in and carrying it onward to the next.
Which wires go together when installing a ceiling fan?
Wiring a Fan or Light Without Switches
- Connect the white wires (neutral wires) from your fan and ceiling together.
- Connect the green wire to your household ground wire (copper/bare wire).
- Connect the black wires together.
- Lastly, connect the blue wires together, or the blue wire to the black wire for lights.
Which wire is hot when both are same color?
In most modern fixtures the neutral wire will be white and the hot wire is red or black. In some types of fixtures, both wires will be the same color. In this case, the neutral wire is always identified by some means. In some cases, there will be small writing on the wiring case.
Do I need to ground my ceiling fan?
The most common over current devices installed for the home electrical system are circuit breakers or fuses. The installation of the ceiling fan without the ground wire will not affect the performance of the ceiling fan, however this safety system that is provided through the ground system will not be available.
Can you pigtail red and black wires?
When making a pigtail, choose a scrap of wire with insulation that is the same color as the circuit wires you are connecting: white pigtails when connecting to neutral wires, red or black when connecting to hot wires, green or bare copper when connecting to grounding wires.
Can you put two black wires together?
This is the typical way to connect a switch. The 2 blacks connected are “power in, power out” to the next switch in the circuit. The pig-tail to the dimmer connected to the two blacks is also typical.
What happens if you switch black and red wires?
If you switch the red and black speaker wires, all that happens is that the drivers push out instead of pulling in (and vice versa).
Which wire is hot when both are black?
Here’s a rundown of electrical wires: The black wire is the “hot” wire, it carries the electricity from the breaker panel into the switch or light source. The white wire is the “neutral” wire, it takes any unused electricity and current and sends it back to the breaker panel.
How do you know if its a line or load?
Load Wire – Generally connected to the top half of your switch. If the wire is coming from the top of the switch box, it is likely your load wire. Line Wire – Generally connected to the bottom half of your switch. In some cases, line wires are marked with “line”, “pwr”, or a lightning bolt symbol.
Does red connect to black or white?
The two outlets will share a common return path on a single white wire, and they will share a common ground. The standard way to power a split-tab outlet is to run a three-conductor cable to a wall switch. The cable has a black wire, which connects directly to the circuit, and a red wire, which connects to the switch.
Where do you connect the red wire on a ceiling fan?
Ceiling Fan Red Wire Connection
- Samuel, the red wire from the ceiling fan fixture box is typically connected to the blue wire of the ceiling fan which is for the light fixture of the ceiling fan.
- Typically the red wire is controlled by a separate wall switch.
Can red and white wires go together?
In the US, the answer would be no, even though I am reluctant to answer this. White is not aggressive. White is neutral, black is 120, green is ground, and red is the other phase of the mains into your house.
