How do you disconnect electrical connectors?
Quote from the video:
Quote from Youtube video: And to disengage this lock lip all you gotta do is use a screwdriver on both sides. And you want to slide it back to you notice that a new tab meet the push in tab.
How do I disconnect my connector block?
Quote from the video:
Quote from Youtube video: Into so whip your screwdriver with the red and the black wires you go in to the block through the front. So you want to pull the wire slightly lift up the tab.
How do you remove connectors terminals?
Quote from the video:
Quote from Youtube video: Now you can actually use a regular flat blade small screwdriver to remove this terminal from this connector. I'll show you slide it in pop it out.
How do you remove electrical wire clips?
MAKE SURE POWER/BREAKER IS OFF YOU WILL BE TOUCHING A “LIVE” WIRE Insert a small jeweler screwdriver in the rectangular hole/slot, use the box as your pivot point and the screwdriver as your level (bring back end of screwdriver towards wire to force “tab” away) and gently pull the wire out.
How do you remove wires from a push in connector?
Quote from the video:
Quote from Youtube video: There is two slots one where the wire goes in and just under it there is a rectangular slot. Where you can take a small flat-head screwdriver and you push that in there.
How do you remove terminals from a fuse block?
To remove a connector, simply insert a very small screw driver on the side of the connector from the top, and press the retaining tab. Pull the connector from the bottom.
How do you remove a pigtail connector?
Quote from the video:
Quote from Youtube video: Okay there you go pull the tab back. And the connector came out. So basically when we pull the tab back is coming off this little hole right here the tab is inserted in there so it won't let this out.
How do you remove crimp pigtail connectors?
Quote from the video:
Quote from Youtube video: And when it's done i can hammer a tiny nail. Into it from this direction. And it's gonna open up the crimped uh part of the connector. Very nicely.
How do I disconnect Wago connectors?
Quote from the video:
Quote from Youtube video: Out. It's not always easy grab a hold of it start twisting the wire twist. And pull twist and pull BAM you take the wire back out just in case you made a wiring mistake.
How do you remove wires from a JST connector?
you just take an xacto knife or awl and push down the metal barbs in the pins which you can see through the connector. usually enough to grip the metal.. push in and then down and it will slide right out. make sure you do only 1 at a time though, otherwise they’re very easy to short the cells.
